Bandai Namco MAXIMUM TUNE 5DX PLUS User manual

MAXIMUM TUNE 5DX PLUS
MAXIMUM TUNE 5DX PLUS
DRIVER CABINET OPERATION MANUAL
To ensure safe operation of this product, be sure to read this Operation Manual before use.
Keep this Operation Manual together with the “MAXIMUM TUNE 5 DX PLUS - WANGAN TERMINAL
OPERATION MANUAL”, the “MAXIMUM TUNE 5 DX PLUS - ADDITIONAL FUNCTION EVENT MODE SETTING
MANUAL” and the “WANGAN MIDNIGHT MAXIMUM TUNE 5DX PLUS- EVENT MODE SETTING MANUAL” in a safe
place for quick access whenever needed.
The actual product may differ slightly from the illustrations in this Operation Manual.
Part No.: 741-360
First edition issued in July 2016
The machine specications or the information in this Operation Manual may be changed without prior notice.
DRIVER CABINET OPERATION MANUAL
2765001100
WMT5DX取扱説明書_EN.indb 1 16/03/22 19:53
©Michiharu Kusunoki/Kodansha Ltd. All rights reserved. ©2016 BANDAI NAMCO Entertainment Inc. ©2016 BANDAI NAMCO Amusement Inc.

Introduction
Thank you very much for purchasing MAXIMUM TUNE 5DX PLUS (referred to as “this product” in this manual). This product
consists of the Driver Cabinet (referred to as the “machine” in this manual) and the Wangan Terminal.
This Operation Manual describes:
•Information needed to correctly understand the machine.
•How to safely install, move, transport, operate, service and dispose of the machine.
•How to make full use of the machine’s functions and operate it correctly.
•How to ensure the safety of players and bystanders.
In addition to this Operation Manual, the following manual is also supplied separately.
MANUAL (supplied with
•MAXIMUM TUNE 5DX PLUS - WANGAN TERMINAL OPERATION the Wangan
Terminal)
•MAXIMUM TUNE 5DX PLUS - EVENT MODE SETTING MANUAL
Contact for this machine and machine repair inquiries
•For inquiries regarding the machine or machine repairs, contact your distributor.
The copyrights, trademarks and other rights used by the machine are noted at the end of this Operation
Manual.
WMT5DX取扱説明書_EN.indb 2 16/03/22 19:53

1
2
1
3
4
5
6
7
8A
8B
9
10
11
12
Safety Precautions
Test Mode Troubleshooting
1. Safety Precautions – Be sure to read to ensure safe operation –
Instructions to the Owner
If you outsource the work for installing, moving, transporting, operating, servicing or disposing the machine to
other people, ensure that these people read the relevant sections of this operation manual carefully and observe
the corresponding precautions.
1-1 Levels of Risk
ThesafetyandpropertydamageprecautionsonthemachinelabelsandinthisOperationManualareclassied
according to their risk level, as follows.
:Failure to avoid these risks may result in serious injury or death
:Failure to avoid these risks may result in light injury or damage to other property
Notes about functionality that are not linked to safety are indicated with the following symbol.
:Information about product functions or protection
1-2 Denition of “Technician”
This Operation Manual is designed for arcade personnel. However, the sections marked “Must be performed by a
technician” in the Table of Contents are written for technicians. These tasks must be performed by technicians only.
Technician: Aperson involved in design, manufacture, inspection or service at an amusement device manufacturer,
or a person involved routinely in the service or management (such as repair) of amusement devices
and who has specialist knowledge of electricity, electronics or mechanical engineering equivalent to
or higher than that of a technical high school graduate.
WMT5DX取扱説明書_EN.indb 1 16/03/22 19:53

1. Safety Precautions – Be sure to read to ensure safe operation –
2
1-3 Critical Safety Precautions
 Should an abnormality occur, turn off the power switch immediately to stop operations. Then, be sure
to disconnect the power cord plug from the outlet.
Operating the machine while the abnormality persists may result in re or accident.
 Dust accumulating on the power cord plug may result in re. Inspect the plug regularly and remove
any dust.
 Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in re or
burns.
 Damage to the power cord may result in re, electric shock or electrical leakage. Be sure to observe
the following.
•Keep the power cord away from heaters.
•Do not twist the power cord.
•Do not forcibly bend the power cord.
•Do not alter the power cord.
•Do not bundle the power cord.
•Do not pull the power cord. (Always unplug by holding the plug and not the power cord.)
•Do not place objects on the power cord.
•Do not allow the power cord to be caught between the machine and other devices or the wall.
•Do not do anything else that might damage the power cord.
 Do not expose the power cord and power cord plug to water. It may result in electric shock or electri-
cal leakage.
 Do not touch the power cord plug with wet hands. It may result in electric shock.
 The power capacity of the machine is AC 100 V (or AC 220 V), maximum current consumption 4.8 A. To
prevent re and electric shock, use indoor wiring that conforms to these power supply specications.
 Use a power supply voltage range of AC 90 V to 110 V (or AC 220 V). Using a voltage outside this range
may result in re or electric shock. However, to ensure that the machine operates in the optimum
condition, keep the voltage at AC 100 V (or AC 220 V) as much as possible.
 To ensure safe use of the machine, be sure to perform the pre-operation inspection (See “7-3 Pre-
operation Inspection” on page 21) and service (See “8B Service” on page 90).
Omitting these inspections or service may result in an accident.
Use the consumables and service parts (including screws) that are specified by BANDAI NAMCO
Amusement Inc.
To order parts, contact your distributor.
Do not modify the machine without permission. Do not perform any operations that are not described
in this Operation Manual. Modifying the machine may create unforeseen hazards.
WMT5DX取扱説明書_EN.indb 2 16/03/22 19:53

1. Safety Precautions – Be sure to read to ensure safe operation –
3
3
4
5
6
7
8A
8B
9
10
11
12
Safety Precautions
Test Mode Troubleshooting
2
1
1-4 Machine Warning Labels
 The warning labels attached to the machine contain important information for ensuring safety. Be
sure to observe the following.
• To ensure that the warning labels attached to the machine are always clearly visible, install the
machine in an appropriate location with ample illumination and keep the labels clean at all times.
Make sure that the labels are not hidden by other machines or objects.
• Do not remove or alter the warning labels.
• If a warning label becomes excessively dirty or damaged, replace it with a new one. To order warn-
ing labels, contact your distributor.
• For the warning labels attached to the Wangan Terminal, see the “Wangan Terminal Operation
Manual” supplied with the Wangan Terminal.
Caution sticker Hypersensitivity to Light (H)
Part No.: 461-504
Caution sticker Seat Slide (C)
Part No.: 461-776
*
•
•
Internal parts refers to the game
PC board and other components.
Warning sticker Service B
Part No.: 461-677
Please beware if you have ever suffered any side effects when playing
video games with flashing screens or are concerned that you might be
in danger of doing so. Please take care when playing this game.
If you feel unwell, please stop playing and take a rest.
The seat moves forward and back, and may pinch your
fingers or other items. Do not touch the gaps between
the seat unit and the main base or surrounding areas.
FINGER PINCHING!!
WMT5DX取扱説明書_EN.indb 3 16/03/22 19:53

4
Introduction
1. Safety Precautions – Be sure to read to ensure safe operation – ............................................................................................. 1
1-1 Levels of Risk...............................................................................................................................................................1
1-2 Denitionof“Technician”..............................................................................................................................................1
1-3 Critical Safety Precautions ...........................................................................................................................................2
1-4 Machine Warning Labels..............................................................................................................................................3
Table of Contents ............................................................................................................................................................................4
2. Specications...........................................................................................................................................................................8
3. Package Contents..................................................................................................................................................................10
4. Overall Structure (Part Name)...............................................................................................................................................12
5. Installation ..............................................................................................................................................................................13
5-1 Installation Conditions ................................................................................................................................................13
5-1-1 Installation Locations to Avoid..........................................................................................................................13
5-1-2 Play Zone for the Installed Machine.................................................................................................................14
5-2 Required Dimensions for the Delivery Route (Such as Doors and Corridors) ...........................................................15
6. Moving and Transporting ......................................................................................................................................................16
6-1 Moving (On the Same Floor)......................................................................................................................................16
6-2 Transporting ...............................................................................................................................................................17
6-2-1 Transporting Manually (Such as Carrying on Stairs)........................................................................................17
6-2-2 Loading and Unloading to and from a Vehicle .................................................................................................18
6-2-3 Transporting on a Vehicle.................................................................................................................................19
7. Operation ................................................................................................................................................................................20
7-1 People Who Should Avoid Playing .............................................................................................................................20
7-2 Safety Precautions for Playing ...................................................................................................................................20
7-3 Pre-operation Inspection ............................................................................................................................................21
7-3-1 Safety Inspection (Before Power On)...............................................................................................................21
7-3-2 Function Inspection (After Power On)..............................................................................................................22
7-4 Playing the Game.......................................................................................................................................................23
7-4-1 About BANAPASSPORT Cards .......................................................................................................................23
7-4-2 Using BANAPASSPORT Cards with This Machine..........................................................................................23
7-4-3 Game Overview ...............................................................................................................................................24
7-5 Opening and Closing the Service Door......................................................................................................................30
7-6 Power Switches and Adjustment Switches.................................................................................................................31
7-6-1 Turning the Power Switch On...........................................................................................................................31
7-6-2 Adjustment Switches........................................................................................................................................32
7-7 Flow during Game Startup .........................................................................................................................................33
7-7-1 Self-test............................................................................................................................................................33
7-7-2 Network Status Indication in the Title Screen ..................................................................................................34
(a) NB LINE Connection Status .........................................................................................................................34
7-7-3 Software Update ..............................................................................................................................................35
7-7-4 ReloadNBLINEPOINTSNoticationScreen .................................................................................................37
7-8 Test Mode...................................................................................................................................................................38
7-8-1 Collective Settings............................................................................................................................................38
7-8-2 MENU Screen ..................................................................................................................................................40
7-8-3 Game Cost and Free Play Settings (COIN OPTIONS)....................................................................................42
Table of Contents
WMT5DX取扱説明書_EN.indb 4 16/03/22 19:53

5
Table of Contents
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Table of Contents
Test Mode Troubleshooting
7-8-4 Game Contents Settings (GAME OPTIONS)...................................................................................................43
7-8-5 CLOSE SETTING ............................................................................................................................................45
7-8-6 Input/Output Test of Switches (I/O TEST)........................................................................................................46
(a) SWITCH TEST .............................................................................................................................................47
(b) LAMP TEST..................................................................................................................................................49
7-8-7 Screen Adjustment (MONITOR TEST) ............................................................................................................50
7-8-8 Volume Adjustment (SOUND TEST)................................................................................................................51
7-8-9 ICCARD•ICCARDR/W•CARDVENDORTEST ........................................................................................53
(a) IC CARD DATA CHECK................................................................................................................................54
(b) IC CARD R/W HARDWARE TEST...............................................................................................................56
(c) IC CARD VENDOR TEST.............................................................................................................................58
(d) IC CARD READING AND EJECT TEST.......................................................................................................59
7-8-10 NETWORK TEST...........................................................................................................................................61
(a) NETWORK STATUS.....................................................................................................................................62
(b) LOCAL NETWORK CHECK .........................................................................................................................63
7-8-11 Displaying Game Data (BOOKKEEPING)......................................................................................................64
7-8-12 OTHER OPTIONS .........................................................................................................................................65
(a) INITIALIZE SETTINGS.................................................................................................................................66
7-8-13 RELOAD NB LINE POINTS...........................................................................................................................67
7-9 Adjustments after Parts Replacement (GO TO I/F INITIALIZE).................................................................................68
7-10 Servicing the IC Card Vendor.....................................................................................................................................69
7-10-1 Adding BANAPASSPORT Cards....................................................................................................................69
7-10-2 Removing Jammed Cards..............................................................................................................................71
7-10-3 Cleaning the IC Card Vendor .........................................................................................................................72
7-11 Daily Cleaning ............................................................................................................................................................75
8. Technician’s Manual - Must be performed by a technician -..............................................................................................76
8A. Installation and Assembly.....................................................................................................................................................76
8A-1 Disassembly...............................................................................................................................................................76
8A-1-1 Removing the Signboard Assembly - Must be performed by a technician - ..................................................76
8A-1-2 Removing the Monitor Assembly - Must be performed by a technician - ..................................................78
8A-2 Level Adjuster Adjustment..........................................................................................................................................81
8A-3 Connecting the Power Cord and Ground ...................................................................................................................82
8A-4 Connecting the LAN Cables.......................................................................................................................................83
8A-5 Inserting the USB Dongle...........................................................................................................................................86
8A-6 Turning the Power Switch On.....................................................................................................................................88
8A-7 Setting the PCB ID .....................................................................................................................................................89
8B. Service ....................................................................................................................................................................................90
8B-1 Inspection and Service...............................................................................................................................................90
8B-1-1 Inspection Items - Must be performed by a technician - ............................................................................90
8B-1-2 Service - Must be performed by a technician -...........................................................................................92
8B-2 Troubleshooting..........................................................................................................................................................94
8B-2-1 Overall - Must be performed by a technician - ...........................................................................................95
8B-2-2 Underbox assembly ...................................................................................................................................96
8B-2-3 Monitor assembly.......................................................................................................................................96
8B-2-4 Signboard assembly...................................................................................................................................97
8B-2-5 Steering assembly......................................................................................................................................97
8B-2-6 Shift (6-Speed MT)Assembly .....................................................................................................................97
8B-2-7 Pedal Assembly..........................................................................................................................................98
WMT5DX取扱説明書_EN.indb 5 16/03/22 19:53

6
Table of Contents
8B-2-8 Seat base assembly...................................................................................................................................98
8B-2-9 Seat Assembly ...........................................................................................................................................98
8B-2-10 Error Display ..............................................................................................................................................99
(1) Network Errors....................................................................................................................................99
(2) Steering Assembly Errors .................................................................................................................100
(3) BANAPASSPORT Card Errors .........................................................................................................101
(4) Other Hardware Errors .....................................................................................................................102
8B-3 Removing, Installing and Replacing Assemblies and Parts .....................................................................................103
8B-3-1 Underbox Assembly - Must be performed by a technician -.....................................................................103
(1) Replacing the Coin Selector .............................................................................................................103
(2) Replacing the Coin Micro Switch......................................................................................................104
(3) Replacing the IC Card Vendor..........................................................................................................105
8B-3-2 Monitor Assembly - Must be performed by a technician - ........................................................................106
(1) Removing and Installing the Service Door........................................................................................106
(2) Replacing the Game PC Board ........................................................................................................107
(3) Replacing the NA-JV (S) PC Board..................................................................................................110
(4) Replacing the STR3 PC Board......................................................................................................... 111
(5) Replacing the STR3 PC Board Fuse................................................................................................112
(6) Replacing the D2 Amp PC Boards....................................................................................................113
(7) Replacing the DOT ONE PC Board..................................................................................................115
(8) Removing and Installing the Control Panel.......................................................................................116
(9) Replacing the View Change Button, Challenge ON/OFF Button, and LEDs ....................................118
(10) Replacing the BANAPASSPORT Card Reader/Writer......................................................................119
(11) Replacing the Environment Sensor ..................................................................................................120
(12) Removing and Installing the Monitor Mask.......................................................................................121
(13) Replacing the squid ring PC Board...................................................................................................123
(14) Replacing the LCD Monitor...............................................................................................................124
8B-3-3 Signboard Assembly - Must be performed by a technician -....................................................................127
(1) Replacing the LED Bar .....................................................................................................................127
(2) Replacing the LED PC Board ...........................................................................................................129
8B-3-4 Steering Assembly - Must be performed by a technician -.......................................................................131
(1) Removing and Installing the Steering Assembly...............................................................................131
(2) Replacing the Steering Assembly Analog Interface ..........................................................................133
(3) Removing and Installing the Steering Wheel....................................................................................135
(4) Replacing the Steering Motor ...........................................................................................................136
8B-3-5 Shift (6-Speed MT) Assembly - Must be performed by a technician -......................................................139
(1) Removing and Installing the Shift (6-Speed MT) Assembly..............................................................139
(2) Replacing the Photosensor...............................................................................................................140
(3) Replacing the Micro switch...............................................................................................................141
(4) Replacing the Shutter .......................................................................................................................143
(5) Replacing the Center Boss...............................................................................................................144
8B-3-6 Pedal assembly - Must be performed by a technician - ...........................................................................146
(1) Removing and Installing the Pedal Assembly...................................................................................146
(2) Replacing the Pedal Assembly Analog Interface ..............................................................................147
(3) Replacing the boot............................................................................................................................149
(4) Replacing the Brake Damper............................................................................................................151
(5) Replacing the Cushion......................................................................................................................152
WMT5DX取扱説明書_EN.indb 6 16/03/22 19:53

7
Table of Contents
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Table of Contents
Test Mode Troubleshooting
8B-3-7 Seat Base assembly – Must be performed by a technician-...................................................................153
(1) Replacing the LED PC Board ...........................................................................................................153
8B-3-8 Seat Assembly –Must be performed by a technician-............................................................................155
(1) Replacing the LED PC Board ...........................................................................................................155
(2) Replacing the Seat Rails ..................................................................................................................157
9. Disposal ................................................................................................................................................................................160
10. Parts List...............................................................................................................................................................................161
10-1 Underbox Assembly .................................................................................................................................................161
10-2 Monitor Assembly.....................................................................................................................................................163
10-3 Signboard Assembly.................................................................................................................................................165
10-4 Steering Assembly....................................................................................................................................................166
10-5 Shift (6-speed MT) Assembly ...................................................................................................................................167
10-6 Pedal Assembly........................................................................................................................................................168
10-7 Service Plate Assembly............................................................................................................................................169
10-8 Cord Box Assembly..................................................................................................................................................169
10-9 Seat Base Assembly ................................................................................................................................................170
10-10 Seat Assembly..........................................................................................................................................................171
11. Wiring Diagram.....................................................................................................................................................................172
WMT5DX取扱説明書_EN.indb 7 16/03/22 19:53

8
2. Specications
(1) Power supply rate AC 110 V ±10% (50/60 Hz), 220 V ±10% (50/60 Hz)
(2) Power consumption rate 410 W
(3) Maximum current consumption 4.8 A
(4) Cashbox capacity Approx. 300,000 yen (3,000 100 yen coins)
(5) Display unit 32-inch LCD monitor
Number of pixels: H 1,366 × V 768 (pixels)
(6) Dimensions
1) When installed Width (W) 880 × Depth (D) 1,500 × Height (H) 2,050 [mm]
1,500 880
2,050
2) When disassembled
Underbase Width (W) 880 × Depth (D) 1,500 × Height (H) 1,240 [mm]
1,500 880
1,240
WMT5DX取扱説明書_EN.indb 8 16/03/22 19:53

2. Specications
9
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Specications
Test Mode Troubleshooting
Monitor assembly Width (W) 880 × Depth (D) 680 × Height (H) 790 [mm]
680 880
790
Signboard assembly Width (W) 870 × Depth (D) 280 × Height (H) 530 [mm]
280 870
530
(7) Weight
1) When installed 210 kg
2) When disassembled
Underbase 110 kg
Monitor assembly 90 kg
Signboard assembly 15 kg
WMT5DX取扱説明書_EN.indb 9 16/03/22 19:53

10
3. Package Contents
The following items are included when this machine is shipped.
 Make sure that all the items below are contained in the product package.
 If any items are missing, contact your distributor.
Driver Cabinet
2,3,5
4
(packed inside the cashbox)
WMT5DX取扱説明書_EN.indb 10 16/03/22 19:53

3. Package Contents
11
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Package Contents
Test Mode Troubleshooting
Supplied Item List
No. Name Specification Qty.
1 Driver Cabinet Operation Manual
Included with the Wangan Terminal
1
2 Service key 2
3 Cash box key 2
4 LAN cable 10 m 1
5 Coin sticker 1
(this manual)
WMT5DX取扱説明書_EN.indb 11 16/03/22 19:53

12
4. Overall Structure (Part Name)
Steering assembly
Monitor
Control panel
Shift (6-speed MT) assembly
Pedal assembly
Game PC board
Cord box assembly
Underbox assembly
Seat base assembly
Seat assembly
Monitor assembly
Service door
IC card vendor
Power switch
(inside the service door)
BANAPASSPORT card reader/writer
Underbase
Signboard assembly
WMT5DX取扱説明書_EN.indb 12 16/03/22 19:53

5. Installation
5-1 Installation Conditions
 Do not block the ventilation holes on the back side of the machine with any objects or a wall, etc.
If the ventilation holes are blocked, the inside of the machine may become hot and result in re or
malfunction.
5-1-1 Installation Locations to Avoid
 The machine is designed for indoor use. Never install the machine outdoors or in the following loca-
tions.
• A location exposed to direct sunlight
• A location exposed to rain or water leaks
• A damp location
• A dusty location
• A location close to heaters
• A hot location
• An extremely cold location
• A location exposed to condensation caused by temperature differences
• A location that obstructs an emergency exit or re extinguishing equipment
• An unstable location or a location exposed to vibration
13
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Installation
Test Mode Troubleshooting
WMT5DX取扱説明書_EN.indb 13 16/03/22 19:53

5-1-2 Play Zone for the Installed Machine
 Create a play zone around the machine so that players leaving the machine do not bump
into bystanders or passersby.
 When installing the machine, create a play zone as shown in the gures below. Be
sure to maintain this play zone, as it is also needed for service work.
 A ceiling height of 2 m 10 cm or more is required.
Play zone
Corridor
Wall
50 cm or more 50cm or more
50cm or more
1m50cm or more
1 m or more
5 m 70 cm or more
Service zone
10cm or more 10cm or more
Corridor
Service
zone
Play zone
50cm or more
50cm or more
1 m 50 cm or more
1m or more
50cm or more
10cm or more
3m80cm or more
Wall
10cm or more
5. Installation
14
WMT5DX取扱説明書_EN.indb 14 16/03/22 19:53

5-2 Required Dimensions for the Delivery Route
(Such as Doors and Corridors)
Adeliveryroutesufcientlylargerthanthemachine’sheightandwidthmustbesecured.
The sizes of the machine when installed and when shipped are as follows.
To move the machine, entryways and corridors need to be larger than the sizes below.
Width (W) 880 × Depth (D) 1,500 × Height (H) 2,050 [mm]
Weight 210 kg
When a delivery route with the following dimensions or larger can be secured, disassembly is not required.
In this case, go to “8A-2 Level Adjuster Adjustment” on page 81.
In addition, the machine can be disassembled as follows in accordance with the delivery route conditions.
Underbase
Width (W) 880 × Depth (D) 1,500 × Height (H) 1,240 [mm]
Weight 110kg
Monitor assembly
Width (W) 880 × Depth (D) 680 × Height (H) 790 [mm]
Weight 90kg
Signboard assembly
Width (W) 870 × Depth (D) 280 × Height (H) 530 [mm]
Weight 15kg
For the disassembly method, see “8A-1-1 Removing the Signboard Assembly” on page 76 to “8A-1-2 Removing
the Monitor Assembly” on page 78.
5. Installation
15
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Installation
Test Mode Troubleshooting
WMT5DX取扱説明書_EN.indb 15 16/03/22 19:53

6. Moving and Transporting
 Do not leave the machine on a slope. It may fall over or result in an accident.
 When transporting the machine, be sure to use two or more people. Attempting to move the machine
with fewer people may cause the machine to fall over or result in an accident.
6-1 Moving (On the Same Floor)
 Be sure to turn off the power switch before starting work.
 Move the machine carefully to avoid subjecting it to impact. (The LCD monitor is a
precision electronic part.)
 Even when moving the machine only a short distance, be sure to raise the level
adjusters to their highest level. (See “8A-2 Level Adjuster Adjustment” on page 81.)
 Handle the LAN cables and power cord carefully. Be especially careful when
connecting and disconnecting the LAN cable connectors. (See “8A-3 Connecting the
Power Cord and Ground” on page 82 and “8A-4 Connecting the LAN Cables” on
page 83.)
16
WMT5DX取扱説明書_EN.indb 16 16/03/22 19:53

6-2 Transporting
6-2-1 Transporting Manually (Such as Carrying on Stairs)
 Before transporting the machine manually, be sure to disassemble it into the underbase, monitor
assembly and signboard assembly for easier carrying. Transporting the fully assembled machine
manually (such as carrying on stairs) or loading and unloading it to and from a vehicle may result
in an accident.
 When transporting the machine manually, be sure to use the following number of people. Overburden-
ing yourself may result in an accident or injury.
• Underbase (110 kg): 5 people or more
• Monitor assembly (90 kg): 4 people or more
• Signboard assembly (15 kg): 1 person or more
Signboard assembly
Underbase
Monitor assembly
 Do not subject the machine to impact while moving it.
 Move the machine carefully to avoid damaging it.
 Be sure to raise the level adjusters to their highest level. (See “8A-2 Level Adjuster
Adjustment” on page 81.)
6. Moving and Transporting
17
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Moving and Transporting
Test Mode Troubleshooting
WMT5DX取扱説明書_EN.indb 17 16/03/22 19:53

6-2-2 Loading and Unloading to and from a Vehicle
 When using a fork lift to move or transport the machine, observe the fork sticker positions. If the fork
is inserted to a different position than the fork stickers, the machine may become unbalanced and
fall over or result in an accident.
Fork position
FORK
Fork sticker
 Do not subject the machine to impact while lowering it.
 Move the machine carefully to avoid damaging it. (The LCD monitor is a precision
electronic part.)
 Be sure to raise the level adjusters to their highest level. (See “8A-2 Level Adjuster
Adjustment” on page 81.)
6. Moving and Transporting
18
WMT5DX取扱説明書_EN.indb 18 16/03/22 19:53