Bartscher 700211G User manual

700211G
Original-Gebrauchsanleitung
V
2
/
1015

- 19 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Safety instructions................................................................................................ 20
1.2 Key to symbols..................................................................................................... 22
1.3 Hazard sources.................................................................................................... 22
1.4 Proper use............................................................................................................ 24
2. General information................................................................................................ 25
2.1 Liability and Warrantees....................................................................................... 25
2.2 Copyright protection ............................................................................................. 25
2.3 Declaration of conformity...................................................................................... 25
3. Transport, packaging and storage......................................................................... 26
3.1 Delivery check...................................................................................................... 26
3.2 Packaging............................................................................................................. 26
3.3 Storage................................................................................................................. 26
4. Technical data......................................................................................................... 27
4.1 Overview of parts ................................................................................................. 27
4.2 Technical specification ......................................................................................... 29
5. Installation and operation....................................................................................... 30
5.1 Positioning and connection................................................................................... 30
5.2 Operation.............................................................................................................. 32
6. Cleaning................................................................................................................... 34
7. Possible Malfunctions ............................................................................................ 35
8. Waste disposal........................................................................................................ 36
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK

- 20 -
Read these instructions before using and keep
them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions in this
manual.
1.1 Safety instructions
• This device may only be operated in technically proper and safe
condition.
• The device is not intended for use by individuals (including children)
with physical or mental disabilities, insufficient experience, and/or
insufficient knowledge unless such persons are under the care of a
person responsible for their safety or have received instructions
regarding appropriate use of the device.
• Children should be observed to ensure that they are not playing with
the device.
• Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device.
Do not attempt to repair the device yourself.

- 21 -
•
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.
• To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken.
• Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.
• The power cable must not be folded, bent or tangled, and must always
remain fully unrolled.
• Never place the device or other objects on the power cable.
• Do not lay the cable over carpets or heat insulations. Do not cover the
cable. Keep away the cable from operating range and do not dunk it
into water.
• Inspect the power cable regularly for damage. Never use the device if
the cable is damaged. If the power cable is damaged, have an
authorised service center or qualified electrician replace it.
• The device is not adapted for use with an external timer or remote
control.
• Do not move or tilt the device when in operation.
• Only use the device indoors.

- 22 -
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.3 Hazard sources
DANGER!
Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
Do not use the machine in case of incorrect operation, damages or dropping on the
floor.
The supply cable must be disconnected from the socket only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of electrical or mechanical
modifications the electric shock hazard will occur.

- 23 -
Never immerse the plug in water or other liquids.
Never operate the device with moist hands or standing on wet floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.
DANGER!
Suffocation hazard!
Prevent access of children to the package materials like plastic bags and
foamed polystyrene elements.
WARNING!
Burn hazard!
To avoid the hazard results please follow the safety instructions below.
During normal operation the compressor surface may be hot. Do not touch it with
bare hands.
WARNING!
Fire or explosion hazard!
In case of improper operation there is the fire or explosion hazard due to ignition of the
device content.
To avoid the hazard results please follow the safety instructions below.
Do not store the flammable or explosive substances in the device, like ether,
kerosene, or glues.
Do not clean the device with use of flammable liquids. The released vapours
may cause fire or explosion.
Do not store gasoline or other flammable substances in the vicinity of the
device. The vapours may cause fire or explosion.
Do not store the explosive objects in the device, like cans with explosive work
substances.
Do not allow for the cooling circuit damages.

- 24 -
1.4 Proper use
CAUTION!
The device has been designed and manufactured for the industrial use and
should be operated only by the qualified personnel of the restaurants,
canteens and similar places.
The operational safety of the device is assured only in case of proper use, according to
the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The refrigerated display cabinet is designed for food cooling only.
Do not use the refrigerated display cabinet for the:
-storage of flammable substances or explosive materials, for example
ether, petroleum, or advesives;
-storage of medicinal products or preserved blood products.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 25 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 26 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-Do not store outdoors.
-Keep it dry and dust-free.
-Do not expose it to aggressive media.
-Do not expose it to direct sunlight.
-Avoid mechanical shocks and vibration.
-In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.

- 27 -
4. Technical data
4.1 Overview of parts
1
Glass cover handle
2
Glass cover
3
GN containers
4
Cutting board
5
Vents
6
ON/OFF switch
7
Digital temperature control
8
Feet
9
Feet
2
4
9
7 6
8
3
1
5

- 28 -
Digital temperature control
The temperature control is located at the service side of the unit.
10
Temperature decrease button
11
Temperature increase button
12
LCD cooling indicator
13
LCD defrost indicator
14
Manual defrost button
15
Adjust/save setting (SET) button
16
Digital display
LCD Indicators
LCD
cooling indicator:
The light on indicates cooling, it is off when the temperature inside the cabinet
remains constant, and flashes for delayed start.
LCD defrost indicator:
The light on indicates defrosting,it is off when defrosting has finished, and
flashes for delayed defrosting.
12 13
10
11 14
15
16

- 29 -
4.2 Technical specification
Item
Refrigerated display cabinet 67L
with 8 GN containers 1/6GN
Code-No.:
700211G
Features: thermostatic cooling, automatic defrost function
Material: stainless steel body; glass cover, safety glass;
cutting board: polyethylene
Volume: 67 litres
Refrigerant: R600a
Operating temperature: 0 °C – 10 °C
Supply power: 70 W / 230 V~ 50 Hz
Dimentions: W 765 x D 610 x H 320 mm
Weight: 27.6 kg
Accessories: 3 bridges: length 360 mm, width 30 mm;
8 GN containers 1/6 GN, depth 100 mm
We reserve the right to make technical changes!

- 30 -
5. Installation and operation
5.1 Positioning and connection
Positioning
•Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•Position the device in safe place of load capacity sufficient for weight of the device
with full content.
•Never place the device on the flammable surfaces.
•In order to avoid the compressor damages do not tilt the device during positioning
or transport by more than 45°.
•Do not place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.
•During the device installation keep in mind that the environment temperature should
not be lower than 0 °C and higher than 32 °C.
•Position the device in such way that free air circulation is assured. Remain distance
of at least 10 cm from the walls and other objects.
•Never cover the ventilation holes of the device.
•Do not place the device in places of high air humidity. The excessive humidity may
damage the device.
•Do not bore holes or install other objects in the device.
•Do not place any heavy objects on the device.
•Position the device in such way that the plug is easily accessible for quick
disconnecting when required.

- 31 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•Before use position the device and leave it for at least 2 hours before connecting
to the power supply.
•After a power outage or after removing the plug from its socket do not connect
the device to a power source for at least 5 minutes.
•The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

- 32 -
5.2 Operation
Preparation
•Before you start using the unit read the instruction manual to know the unit and its
accessories.
•Before you start using the unit clean it thoroughly following the instructions in point
6.2 “Cleaning“.
•Shut the glass cover.
•Plug in the unit to the correct, single socket. Turn the unit on with ON/OFF switch
(set at “I“).
•The digital display will show the set temperature and the LED cooling
indicator will light.
•You should place the food in the refrigerated cabinet only when the unit reaches
its operational cooling parameters.
Set the required temperature (required value)
•Optimal temperature is set as default and corresponds to the operational
temperature inside the refrigirated cabinet between 0 °C and 10 °C.
•To set or change the required value:
press , and the set value starts flashing on the digital display;
increase or decrease the temperature as required with or buttons;
save the set temperature with button.
NOTE!
Unless you press any button in the 10 following seconds the digital
display shows the temperature inside the refrigerated cabinet.
The displayed temperature is the value measured in the close proximity to the
temperature probe and serves controlling the cooling.

- 33 -
Automatic defrost
The unit is automatically defrosted 4 times in 24 hours.
Manual defrost
In the case of reduced cooling capacity, for example when the glass cover remains
open for a long time, the manual defrost is recommended. To start defrosting press
button and hold it for 6 seconds.
The LCD indicator “ “ for defrosting will light.
Designated GN containers
•You can use the following GN containers with the unit:
1 x 1/1 GN + 1 x 1/3 GN, depth 100 mm (with a bridge in between)
8 x 1/6 GN, depth 100 mm (with 3 bridges in between)
Cooling food products
•When the temperature inside the unit reaches the set value the LED cooling
indicator goes off and you can place the food products inside the unit.
NOTE!
You should not place any hot food in the refrigerated cabinet.
The food should cool down to the ambient temperature first.
•First prepare the food products and place them in the suitable GN containers.
•Shut the glass cover right after you have placed the food products in to limit the
loss of the cooled air inside the refrigerated cabinet.
•Shut the glass cover when you have taken out the required food products.
•In the case you plan not to use the unit for some time you should turn it off (set
the ON/OFF switch at „O“) and disconnect from the power supply (unplug!).

- 34 -
6. Cleaning
CAUTION!
Disconnect the unit from the power supply (unplug!) before cleaning.
The unit is not designed to be rinsed with running water and you should
not use the pressured water to clean it! Be careful and do not let the water
into the unit.
oClean the refrigerated cabinet regularly.
oOpen the glass cover, remove the GN containers with the food products from the
refrigerated cabinet and store them in a refrigerator.
oRegularly clean the inner side of the refrigerated cabinet and glass cover using
warm water and food safe desinfectant. Use soft clothes only. Rinse with clean
water to completely remove any remains of the cleaning agent.
Thoroughly dry the cleaned areas.
oCareful! In the lower part of the unit there is a rubber drain hose locked with the
plug. If condensed water or cleaning water collects in the area with the GN
containers when the unit operates, you can remove the water with the drain hose
to any suitable container. Re-lock the hose with the rubber plug afterwards.
oClean the outer surface of the body, cutting board and glass cover with a damp
cloth and mild cleaning agent, and dry thoroughly.
oClean the used GN containers with warm water and food safe desinfectant.
Thoroughly rinse the GN containers with clean water and dry them well.
oNever use aggresive or coarse cleansing agents, for example scouring powder,
alcohol containing agents, solvents, that might damage the surface of the unit.

- 35 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem Cause Solution
No cooling
•The plug is not placed in the
socket.
•Failure of the power supply
fuse.
•No power supply.
•Failure of the temperature
control.
•Plug into the socket
correctly.
•Verify the power supply.
•Verify the power supply.
•Contact the seller.
Not sufficient
cooling capacity
•Direct sun exposure or there
are sources of heat in the
close proximity to the unit.
•Wrong air circulation in
the unit.
•The glass cover not
completely shut or stays
open for too long.
•Move the unit further from
the sources of heat.
•Make sure there is enough
room between the unit and
the walls or other objects.
•Completely shut the glass
cover and shorten the time
when it stays open.
Loud sounds
when operating
•The unit is not placed on the
even surface.
•The unit is too close to the
walls or other objects.
•Place the unit on the even
surface.
•Make sure there is enough
room between the unit and
the walls or other objects.
Cooling does not
turn off
automatically •The glass cover stayed open
for too long. •Shorten the time when the glass cover stays open.
If you cannot remove the malfunctions:
-do not open the body,
-notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate
at the rear of the device).

- 36 -
The following do not indicate failure:
1. Sound of flowing water. The sound you can hear when the unit works normally.
The sound is created by the refrigerant circulating in the system.
2. Water condensation on the outer glass walls is normal at higher humidity.
Condensed water should be collected with a soft and dry cloth.
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit
for use before disposal. For that purpose disconnect device from mains
supply and remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]