Bartscher 850008 User manual

Seifenspender
für Wandmontage
Wall-mounted
soap dispenser
Distributeur de savon
pour montage mural
Dispenser per sapone
da montare a parete
Dispensador de jabon
para montaje en pared
Dispensor de sabonete
para montagem na parede
Zeepdispenser
voor wandmontage
Sæbedispenser
til vægmontage
Настенный дозатор
для жидкого мыла
Duvara monte edilen
sıvı sabun dispenseri
Dozownik do mydła
do montażu naściennego
Davkovačmydla
pro montaž na stěnu
Zidni dozator
tekućeg sapuna
Falra szerelhető
szappanadagolo
Συσκευή υ ρού σαπουνιού
ια επιτοίχια ανάρτηση
850008
F/B/CH
D/A/CH
DK
NL/B
E
I/CH
CZ
HR
TR
RUS
H
GR
PL
P
GB/UK
V1/0113

- 5 -
Technical information:
---------------------------------------------------------------------------------
Name: ● Wall-mounted soap dispenser
Article number: ● 850008
Material: ● Housing: aluminum; tank: plastic
Capacity: ● 1 liter
Dimensions: ● W 95 x D 222 x H 330 mm
Weight: ● 0.65 kg
Equipment: ● wall holder and fastening materials
---------------------------------------------------------------------------------
Soap not included!
Properties
oPerfect for public toilets in food service, hotels, airports, etc.
oHygienic dispensing of common liquid soaps by hand or elbow.
oManual pump system requires no cartridge
oPlastic tank with fill level indicator
oEasy to maintain
GB/UK

- 6 -
Diagramm of parts
①
Soap tank
②
Housing
③
Front cover
④
Pump handle
⑤
Soap nozzle
⑥ Hose
Installation
oUnpack the soap dispenser and fastening materials, and remove all packing materials.
oMount the soap dispenser near a sink for easy accessibility. Follow the instructions
below:
1 Press the soap tank up
and pull it to the front of
the housing. Fill the tank
with commercially
available liquid soap.
2 Free the wall mount on
the housing by pressing
it in then down.
3 Disconnect the wall
mount from the soap
dispenser.
②
①
③
④
⑤
⑥

- 7 -
4 Mark and drill 3 holes
in the wall at the
desired height.
5 Place the supplied
spring pins in the
holes. Fix the wall
mount using the
supplied screws.
6 Next, hang the housing of
the soap dispenser on the
wall mount.
7 Insert the hose into the
soap and slide the tank up
until it rests securely on the
lower support.
Filling the dispenser / using the dispenser
•To fill the dispenser, press the tank up and pull it forward. Fill it, then replace it in the
housing.
•Soap can be dispensed by
pressing the pump either by
hand or elbow.

- 8 -
Cleaning
•Clean the soap dispenser with a soft, moist cloth.
•Never use harsh cleaning substances that could scratch the surface.
•After cleaning, dry and polish the surface with a dry cloth.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]