Bartscher DEW5 User manual

DEW5
150996

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Service hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2021-06-15
Original instruction manual
EN

150996 3 / 6
EN
Technical Data
Name:
Beverages dispenser DEW5
Art. No.:
150996
Material:
stainless steel, polished; plastic
Container material:
plastic
Volume, in l:
5
Container dimensions, Ø / height, in mm:
170 x 285
Max. glass/cup height, in mm:
140
Ice pipe volume, in l:
0,8
Dimensions (W x D x H), in mm:
220 x 330 x 515
Weight, in kg:
3,1
We reserve the right to implement technical modifications.
Version / Characteristics
•Designed for cold beverages
•Cooling beverages with ice pipe
•Detachable ice pipe for filling with ice
•Drip tray: integrated, removable
Intended Use
Beverages dispenser is designed for cooling and keeping suitable beverages cool
with the use of ice pipe.

4 / 6 150996
EN
List of Components of the Appliance
Fig. 1
1. Lid
2. Container cover
3. Ice pipe
4. Container handle (2 pcs)
5. Container
6. Drain tap
7. Base
8. Drip tray with grate
Installation
1. Set the beverages dispenser on a flat, safe surface, which features load-bearing
capacity sufficient for the weight of the appliance and is stable enough.
2. Avoid places of direct sunlight, for this could negatively impact cooling
functionality.

150996 5 / 6
EN
Operation Instructions
1. Before the first use, thoroughly clean the beverages dispenser according to the
instructions in section 'Cleaning'.
2. Make sure that the drain tap is closed, and the container and drip tray are
correctly positioned on the base.
Fig. 2
Fig. 3
3. Insert the ice pipe in the container.
Make sure it is securely set in the
container's bottom.
4. Place a cover at the edge of the
container.
It additionally secures the ice pipe from
the top.
5. Use the opening in the cover to fill
the container with a pre-chilled
beverage.
6. Fill the ice pipe wit ice-cubes.
7. Place the lid on the container.
The ice in ice pipe keeps the beverage chilled for long time.

6 / 6 150996
EN
Beverage Dispensing
1. Dispense beverage from the container as
needed.
2. Place a suitable container under the drain
tap (cup, glass, mug) with maximum
height of 14 cm.
3. Press the drain tap down to dispense the
beverage to a container.
4. When required amount of beverage is
dispensed, release the drain tap.
The drain tap closes automatically.
Fig. 4
Cleaning
WARNING!
For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
1. Clean all beverages dispenser after each use.
2. Remove the lid and cover from the container; remove the container from the
base; remove the ice pipe from the container.
3. Empty the container and the ice pipe.
4. Clean the container thoroughly with warm water, a soft cloth or a sponge and a
mild cleaning agent. If needed, use plastic dish-washing brush.
5. Clean thoroughly the drain tap, filling the container with hot water and draining it
through the drain tap.
6. Wash the cover, lid and ice pipe thoroughly with warm water, a soft cloth or a
sponge and a mild cleaning agent.
7. Wash the removable drip tray and grate with warm water and a mild cleaning
agent.
8. Thoroughly rinse the cleaned parts with fresh water.
9. Wipe the base with a damp, soft cloth.
10.Dry all surfaces with a linen-free cloth.