Bauhn AMAB-0222-D User manual

Attach to your desk
(Mounting to edge of desk)
Attach the arm
Have you got everything?
Unpack the box (be gentle) and make sure all of these items are there:
Adhere the bracket clamp cover to the bracket clamp
and attach the clamp to the base with the cap screw.
Use the 4mm hex key to tighten.
Tighten the bracket clamp from beneath by turning
the adjuster clockwise and make sure it’s tight.
Slide the base cover on and clip into place.
Hey!
Let’s get your new monitor
bracket ready to use, fast!
Installation Guide
Model: AMAB-0222-D
Dual Monitor Bracket
Be careful not to overtighten the clamp or you
might cause surface damage to your desk or table
You will also need
a Phillips-head
screwdriver
to secure your
monitors to the
bracket
A. Pole
B. Monitor Arms
C. M4 x 8mm Screws (8)
D. M4 x 12mm Screws (8)
E. Screw Spacers (8)
F. 4mm Hex Key
G. 5mm Hex Key
H. Pole Cover
I. Bracket Clamp Cover
J. Cap Screw (3)
K. Bracket Clamp
L. Pole Cable Clip
M. Monitor Arm Cable Clips (4)
N. Warranty Certicate
O. General Safety Warnings
P. Installation Guide
Slide the bracket arms
onto the pole. Slide up
or down to adjust the
height of where your
monitors will sit.
Tighten into position
at the back, using the
supplied 5mm hex key.
Nearly done!
Just a bit more
on the other side
of this page...
OP
x 8
x 8 x 8
x 3
x 4
K
LM
N

Mount your monitors
Give us a call
Adjust to your space
Hide those cables
Install the upper two
screws but don’t screw
them completely just
yet. Hang the monitor
on the mounting plate.
Install the lower two
screws. Now you can
fasten the upper two
screws all the way.
You can tuck away those
unsightly cables into the
bracket arm itself.
Put the cables through
the pole cable clip and
monitor arm cable clips
as shown in the diagram.
What? You mean this Installation Guide didn’t have ALL the
answers? Speak to us! We’d love to help you get up and running as
quickly as possible. Call our After Sales Support on 1300 002 534.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
It’s important to make your
workspace as ergonomic as
possible.
This bracket allows you to
adjust the height, tilt and swivel
of your monitor’s position,
so that it’s truly tted to your
space and sitting.
To lock in your adjusted
position, you will need to
tighten the bolts on the
mounting plate and arms using
the supplied 5mm hex key.
This bracket can handle monitors
that weigh 8kg each or less!
Your new Monitor Bracket
is ready to enjoy!
Well done, you made it.
Now sit back and relax... your new monitor bracket
is automatically covered by a 1-year warranty.
How nice!