Bauhn AMAB-0222-S User manual

Attach to your desk
(Mounting to edge of desk)
Attach to your desk
(mounting to desk cable opening)
Have you got everything?
Unpack the box (be gentle) and make sure all of these items are there:
Attach the bracket clamp to the base with the 3 cap
screws. Use the 4mm hex key to tighten.
Loosen the two screws that connect the two parts of
the clamp.
Adhere the bracket cover and the bracket clamp
cover to the support block of the bracket clamp.
Put the arm through the hole in your table.
Tighten the securing bracket by turning the
adjuster clockwise and make sure it’s tight.
If your desk is too thick, adjust the clamp
down a notch and re-tighten.
Install the lower part of the
clamp with the two screws.
Tighten the clamp until it is
securely fastened to the desk.
Nearly done!
Just a bit more
on the other side
of this page...
A. Gas Spring Monitor
Bracket with USB ports
B. Bracket Clamp
C. M4 x 8mm Screws (4)
D. M4 x 12mm Screws (4)
E. Screw Spacers (4)
F. 4mm Hex Key
G. 5mm Hex Key
H. Cap Screws (3)
I. Bracket Clamp Cover
J. Bracket Cover
K. Cable Cover
L. Warranty Certicate
M. General Safety Warnings
N. Installation Guide
You will also need
a Phillips-head
screwdriver
to secure your
monitors to the
bracket
Hey!
Let’s get your new monitor
bracket ready to use, fast!
Installation Guide
Model: AMAB-0222-S
Gas Spring Monitor Bracket
with USB ports
1
1
2
3
2
3
Be careful not to overtighten the clamp or you
might cause surface damage to your desk or table
Be careful not to overtighten the clamp or you
might cause surface damage to your desk or table
L
HI
F
J
K
MN
x 4
x 4
x 3
x 4

Mount your monitors
Give us a call
Adjust to your space
Hide those cables
Install the upper two
screws but don’t screw
them completely just
yet. Hang the monitor
on the mounting plate.
Install the lower two
screws. Now you can
fasten the upper two
screws all the way.
If your monitor is 75 x 75mm mounting pattern, use
the inner 4 holes on the monitor mounts.
We have included two sizes of screws and spacers
to suit most monitors. Select the appropriate screw
length to best suit your installation. If you need to
use the spacers, place them between your monitor
and the mounting plate.
What? You mean this Installation Guide didn’t have ALL the
answers? Speak to us! We’d love to help you get up and running as
quickly as possible. Call our After Sales Support on 1300 002 534.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
3
It’s important to make your workspace as
ergonomic as possible.
This bracket allows you to adjust the height,
tilt and swivel of your monitor’s position, so
that it’s truly tted to your space and sitting.
To lock in your adjusted position, you will need
to tighten the bolt on the mounting plate
using the supplied 5mm hex key.
Use the 5mm hex key to adjust the height
tension of the gas spring arm. This keeps
monitors stable at any position. The heavier
the monitor, the further you’ll need
to turn to the + symbol.
You can tuck away those
unsightly cables into the
bracket arm itself.
Tuck the cables into the
underside of the lower
bracket arm.
Run the cables along
the arm until they reach
the compartment on the
upper part of the arm.
Secure the cables by
locking the compartment
cover onto the arm.
This bracket can handle monitors
that weigh 6.5kg or less!
Your new Monitor Bracket
is ready to enjoy!
Well done, you made it.
Now sit back and relax... your new monitor bracket
is automatically covered by a 1-year warranty.
How nice!
At the back of the bracket, connect the USB cables
to your computer. This allows for the bracket to act
as an adaptor for plugging in your USB devices!