BBC Bircher RFGate 3.W.T User manual

1
RFGate 3.W.T
57.6
17.0
15.565.7
i
i
Transmitter for wicket doors to RFGate 3 wireless signal transmission system
Supplementary sheet to the original instruction manual
General
1Safety instructions
ENGLISH
371106A
05/18
Transmitter
Battery life up to 2 years, but it is recommended batteries are changed every 12 months.
Intended use: In combination with a receiver RFGate 3.x.R
2.1 Industrial door with wicket door
Transmitter for wicket door monitoring. The STOP function of the control is activated when the door is open.
➔See instruction manual of receiver.
4Pairing transmitter with receiver
➔See instruction manual of receiver. The distance between transmitter and receiver and
further transmitters must be at least 0.5 m.
Antenna
Push button
Batteries
CR 2032
Receiver
Transmitter
Magnet
2Common application
3Installation sequence set-up

2
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+

OK?
OK?
3x
< 5 mm
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+
Designed in Switzerland / Made in EU
BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
OK?
 Open housing
Remove batteries (don't touch the reed switches)
 Insert new batteries (take polarity into account)
Put on the cover
5Mounting and set-up
6Maintenance
6.1 Warning indicator for low battery voltage
6.2 Battery change
Receiver: 3 beeps every minute To nd out which transmitter has low
battery voltage:
Press each edge and open / close
the wicket door.
A beep indicates the low battery.
Battery voltage low
8Technical data
9EU Declaration of Conformity
11 Contact
See attachment
OK?
Mount
transmitter and
magnet
Note: Distance
between magnet /
transmitter when
doors are closed
System test
wicket door:
opening and
closing
Wicket
door
correctly
positioned
7Alternative installation with double sided tape
Caution!
Ensure surfaces are clean, dry and free of dust and grease.
View of transmitter
(bottom) Double-sided
adhesive tape
System
Frequency bands 868.15 MHz & 869.525 MHz
Range Under optimum conditions up to 100 m
Pollution degree 2
Working temperature –20 °C to +55 °C
Transmitter
Battery power 2x Lithium 3 V type CR2032
Power consumption Transmitting: 17 mA standby: 16 µA
Protection class IEC 60529 IP65
Beep
10 WEEE
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.