BDI CASCADIA 8254 User manual

A - Hex Wrench 4mm
x 1
B - 5/16-18 x 25mm
Screws 4mm Socket Drive
x 6
C - 1/4-20 x 100mm
Screws 4mm
Socket Drive
8254 x 2
8257 x 4
CASCADIA
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
8254 8257 Revision: 03-16-11
Component List
CASCADIA are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservic[email protected].
For all other concerns, please contact your BDI Retailer.
8254 8257
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [e-mail]
Placement and Maintenance
CASCADIA are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
D- Cabinet Assembly x 1
E- Legs x 2
F- Center Block
8254 x 1
8257 x 2
G- Back Panel
8254 x 1
8257 x 2
D
G
E
BC
F
E
B
CASCADIA 8254 Cabinet CASCADIA 8257 Cabinet

CASCADIA
8254 8257 ASSEMBLY INSTRUCTIONS
2 BDIUSA.COM CUSTOMERSER[email protected]M
Step 1
Attach Legs to Cabinet
Place Cabinet upside down on clean carpet.
Using Screws (B) attach Legs (E) to Cabinet (D)
and tighten with Hex Wrench (A).
Step 2
Attach Center Block to Cabinet
Using Screws (C) attach Center Block (F) to
Cabinet (D) bottom panel.
E
E
D
B
A
D
E
A
C
F
D

CASCADIA
8254 8257 ASSEMBLY INSTRUCTIONS 3 BDIUSA.COM CUSTOMERSER[email protected]M
Step 3
Install Back Panel
Insert top edge of Back Panel (G) into upper
slot, then tilt bottom of panel in and lower panel
into bottom slot.
Step 4
Adjust Levelers
Position Cabinet as desired then turn black puck
levelers by hand to adjust as necessary.
Use Hex Wrench (A) inside bottom of Cabinet to
adjust center leveler as necessary.
G
D
Use Hex Wrench (A) inside bottom of Cabinet
to adjust Leveler as necessary.
Turn black puck leveler by hand
to adjust as necessary.