ASSEMBLY
STEP 5. INSTALL ANCHOR STRAP & SECURE CABINET
With help from another person, carefully walk
the cabinet into the desired position against
the wall.
It is strongly recommended that you anchor your
LINQ Dresser to the wall using the provided
Anchor Strap (C6). Use painter’s tape to mark
the upper left corner of the unit, as shown.
With help from another person, carefully move
the cabinet away from the wall. Measure and
mark the wall as shown.
Attach one end of the Anchor Strap (C6) to the
wall at the marked location with an appropriate
wall anchor and screw (not included).
NOT INCLUDED
PHILLIPS SCREWDRIVER
QTY
1
NOT INCLUDED
WALL ANCHOR
QTY
1
NOT INCLUDED
SCREW
QTY
1
THUMB SCREW – H5 QTY
1
2 PERSON TASK
17.5"
444.5 mm
50.125"
1273.5 mm
Carefully move your Chest close
to the wall and attach the loose
end of the Anchor Strap (C6) to
the back edge of the top panel
with the Thumb Screw (H5).
C6
C6
H5
