BDI CENTRO User manual

Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in Taiwan. 06.09.2016 v2
T2 4mm Hex Wrench
bdiusa.com
customerservic[email protected]om
CENTRO™6459
DRAWER FOR 6459
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Maintenance
Clean wood veneer with a moist cloth.
Your Centro Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware,
please contact BDI Customer Service at: [email protected].
For all other concerns, please contact your BDI retailer.
H10 1/4-20 X 58mm Screw x 4
A2 Drawer
C10R Mounting Block
C10L Mounting Block
C11 Drawer Liner
INSTALLATION INSTRUCTIONS

bdiusa.com
customerservic[email protected]om
CENTRO 6459
DRAWER FOR 6459
2
Drawer Assembly Option #1
Attach the Drawer Body A2 by inserting 4 Screws H10 through the holes on Mounting Blocks C10L and
C10R and thread them into the 4 inserts on the bottom of your Centro Desk 6452.
T2
A2
H10 x 4

bdiusa.com
customerservic[email protected]om
CENTRO 6459
DRAWER FOR 6459
3
Drawer Assembly Option #2 - If your desk is already fully assembled
If your desk is already upright, install the drawer as follows. This requires 2 people. One person holds the
drawer A2 under the desk. The other person inserts Screws H10 into the holes in the side mounting blocks
and threads them into the inserts under the desk. Start all 4 screws before fully tightening.
H10 x 4
2 Person Task
A2
T2

bdiusa.com
customerservic[email protected]om
CENTRO 6459
DRAWER FOR 6459
4
C11 Drawer Liner
A2 Drawer
Install the drawer liner
Install the Drawer Liner C11 into the Drawer A2 as shown.