BDI SEQUEL 20 6114 User manual

SEQUEL®20 6114
3-DRAWER FILE PEDESTAL
DESIGN MATTHEW WEATHERLY
LET’S GET STARTED.
INSTRUCTION MANUAL

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]
Congratulations on the purchase of your Sequel 20 3 Drawer File Pedestal 6114 from BDI.
Your file pedestal has been designed to provide a lifetime of enjoyment. This manual will
provide you with assembly instructions and other helpful information that will ensure
that you get the most out of your file pedestal. Please save it for future reference.
Your Sequel 20 File Pedestal has been engineered for simple assembly. Please follow
these directions carefully to prevent any damage.
Should you need further assistance, contact BDI at customerservic[email protected].
ENJOY!

4 | BDIUSA.COM SEQUEL 20 6114
HARDWARE AND COMPONENTS
PART # T1
DESCRIPTION Hex Wrench
QUANTITY 1
PART # T2
DESCRIPTION Leveler Wrench
QUANTITY 1
HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservic[email protected]om.
Do not use power tools for assembly of this product.
For all other concerns, please contact your BDI retailer.
PART # H5
DESCRIPTION File Bar Clip
QUANTITY 2
PART # H4
DESCRIPTION Small File Bar
QUANTITY 1
PART # H2
DESCRIPTION M4 x 35mm Screw
QUANTITY 6
PART # H1
DESCRIPTION M6 x 15mm Screw
QUANTITY 16

PART # C1
DESCRIPTION Cabinet
QUANTITY 1
HARDWARE AND COMPONENTS
PART # C3
DESCRIPTION Drawer Pull
QUANTITY 3
PART # C4
DESCRIPTION Glass Top
QUANTITY 1
PART # C2
DESCRIPTION Leg
QUANTITY 2
BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]
TOOL REQUIRED (NOT INCLUDED)
Phillips Screwdriver

C2
6 | BDIUSA.COM SEQUEL 20 6114
Carefully position (C1) Cabinet onto its back. Install
(C2) Legs using (H1) Screws and (T1) Hex Wrench. PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 16
STEP 1. ATTACH THE LEGSASSEMBLY
C1
C2
C2
H1
H1
H1
H1
H1

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
Open a drawer and connect a (C3) Drawer Pull
using 2 (H2) Screws. Tighten with a Phillips
Screwdriver (not included). Install the other
2(C3) Drawer Pulls one at a time.
PART/DESCRIPTION QTY
H2-Screw 6
NOT INCLUDED
Phillips Screwdriver 1
ASSEMBLY
STEP 2. ATTACH DRAWER PULLS
C3
C3
C3
H2

8 | BDIUSA.COM SEQUEL 20 6114
LEVEL CABINET
FINE TUNING
Place (C4) Glass Top into position on top of the cabinet. Align
all edges. The glass edge should be oset 1.5mm from the
side of the cabinet on all four sides.
STEP 3. PLACE GLASS TOPASSEMBLY
C4
C1
If needed, dial out 1 or more levelers using the
(T2) Leveler Wrench attain a level stance. PART/DESCRIPTION QTY
T2-Leveler Wrench 1
down
1.5 mm
T2

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]
Letter sized file folders fit side-to-side as shown.
Legal sized file folders fit front-to-back.
For Letter or A4 files facing front-to-back, attach
(H5) File Bar Clip to both ends of (H4) Small File
Bar as shown. Place the file bar assembly in the
notches located on the left and right drawer side
panels. For A4, slide the file bar backwards within
the notch.
ARRANGING YOUR FILES FINE TUNING
PART/DESCRIPTION QTY
H4-SMALL FILE BAR 1
H5-FILE BAR CLIP 2
Letter
side-to-side
Legal
front-to-back
Letter/A4
front-to-back
Letter/A4 notch
H4
H5
H4
H4
H5
H5 H5 H5

10 | BDIUSA.COM SEQUEL 20 6114
CARE & MAINTENANCE
GLASS
Glass surface is maintained using household glass cleaner and a paper towel or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth
can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available
at any grocery store or home improvement center. Dampen the entire glass surface as well as the
Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean
and dry the surface with a paper towel. Check for results and repeat as necessary.
Any scratches or scuffing not eliminated by one of the above methods can often be addressed by
‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a gentle
non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the surface
with a cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from every
other, even when coming from the very same tree. As such, variation in grain, texture and tone should
be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid
positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the
features of natural wood, visit www.bdiusa.com/wood
METAL & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.

BDIUSA.COM | 11NEED ASSISTANCE? [e-mail]
WARRANTY
PRODUCT REGISTRATION
WARNING
BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty which fails under normal use as a
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product,
part or component with a comparable product, part or component. The decision to repair or replace
will be at BDI’s sole discretion.
BDI Home Theater Furniture, Office Furniture, Modular Systems, Tables and other furniture pieces
are warranted for three (3) years from the date of purchase as shown on your sales receipt. The
warranty period starts from the date of purchase. This warranty extends only to the original
purchasers who acquire new product from BDI Authorized Resellers. Any product, part, or
component must have been assembled, installed, used, and maintained according to BDI’s published
instructions in order to be eligible for warranty coverage. Any modification to the original product
voids the warranty.
To view BDI’s complete warranty information, visit www.bdiusa.com/warranty
Registering your new BDI product allows us to send you important product updates, service
information and helpful hints related to your BDI products. Register today, and you will be entered
to win free a BINK table from BDI: www.bdiusa.com/register
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM FURNITURE TIP-OVER. TO HELP
PREVENT TIP-OVER:
nInstall tip-over restraint.
nPlace heaviest items in lower compartments.
nNever allow children to climb or hang on drawers, doors or shelves.
nNever open more than one drawer at a time.
USE OF TIP-OVER RESTRAINT MAY REDUCE—BUT NOT ELIMINATE—THE RISK OF TIP-OVER.

These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2020, BDI | V.08.21.2020
Made in Vietnam.