BDI Sola 6817 User manual

bdiusa.com
[e-mail]
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Sola™Office furniture is designed for indoor use on level floors.
Clean surfaces with a moist cloth.
Your Sola™Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at:
[email protected].
For all other concerns, please contact your BDI retailer.
A1 Cabinet
C6 File Bar Clip x 2
C7 Small Swivel Caster
x 1
C8 Locking Swivel
Caster x 4
H5 Phillips Machine
Screw x 20
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright
laws. Sola & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 6.14.2018 V1
SolaTM 6817
Multifunction Cabinet
Tool Required:
Phillips screwdriver
C5 Large File Bar x 1
C11 Drawer liner

bdiusa.com
[e-mail]
SOLA 6817
MULTIFUNCTION CABINET
2
Step 3 - Adjust shelf if needed
The shelf position can be adjusted by unscrewing the 4 shelf pins and moving them up or down to the desired
level.
Step 2 - Lay Cabinet on its back side. Attach 4 swivel locking casters C8 to the corners of the cabinet
bottom panel using 16 screws H5 and tighten with a Phillips screwdriver. Attach small swivel caster C7 to
the drawer block as shown using 4 screws H5.
Adjustable shelf
Pull-out shelf
for printer
C7
C7
C8
H5
C8
C8
C8
C8
drawer block

bdiusa.com
[e-mail]
SOLA 6817
MULTIFUNCTION CABINET
3
Step 4 - File Bar Installation (Letter File)
For letter files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place
the file bar assembly in the notches located on the left and right drawer side panels. For legal files, remove the
Large File Bar and hang file folders on the front and rear rails.
C5
C6

bdiusa.com
[e-mail]
SOLA 6817
MULTIFUNCTION CABINET
4
Step 5 - Install Drawer Liner
Open the top drawer and install the drawer liner. Place grippy side down.
C11 Drawer liner