BDI INTERVAL 7247 User manual

INTERVAL™7247 & 7249
CABINET
DESIGN AL GLASS AND MATTHEW WEATHERLY
LET’S GET STARTED.
INSTRUCTION MANUAL

BDIUSA.COM | 3NEED ASSISTANCE? customerservic[email protected]
Congratulations on the purchase of your Interval Cabinet from BDI. Your cabinet has
been designed to provide a lifetime of enjoyment. This manual will provide you with
assembly instructions and other helpful information to ensure that you get the most out
of your product. Please save it for future reference.
Your Interval Cabinet has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at [e-mail].
ENJOY!

4 | BDIUSA.COM INTERVAL 7247 / 7249
HARDWARE AND COMPONENTSHARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. Do not use power tools for the assembly of this product.
For missing hardware pieces, please contact BDI Customer Service at cust[email protected]om.
PART # T2
DESCRIPTION Leveler Wrench
QUANTITY 1
PART # H5
DESCRIPTION TV Safety Strap
QUANTITY 1
PART # T1
DESCRIPTION Hex Wrench
QUANTITY 1
PART # H4
DESCRIPTION KLEET™ Cord Wrap
QUANTITY 2
PART # H1
DESCRIPTION M6 x 20mm Screw
QUANTITY 8
PART # C1
DESCRIPTION Base Leg
QUANTITY 2
PART # C2
DESCRIPTION Base Spanner
QUANTITY 2
PART # H2
DESCRIPTION M6 x 65mm Screw
QUANTITY 8
PART # H3
DESCRIPTION Shelf Pin
QUANTITY 14

BDIUSA.COM | 5NEED ASSISTANCE? customerservic[email protected]
HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS
PART # C3
DESCRIPTION Cabinet, 7247 or 7249 (shown)
QUANTITY 1
PART # C5
DESCRIPTION Side Shelf
QUANTITY 2
PART # C4
DESCRIPTION Glass Shelf
QUANTITY 1
PART # C6
DESCRIPTION Removable Back Panel
QUANTITY 2

6 | BDIUSA.COM INTERVAL 7247 / 7249
ASSEMBLY
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 8
Attach (C1) Base Legs to (C2) Base Spanners
using 8 (H1) Screws. Tighten with (T1) Hex
Wrench.
STEP 1. ASSEMBLE BASE
C1
C1
C2
C2
H1
H1
H1

BDIUSA.COM | 7NEED ASSISTANCE? customerservic[email protected]
ASSEMBLY
STEP 2. ATTACH BASE TO CABINET
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H2-SCREW 8
With help from another person, carefully rotate
the (C3) Cabinet backwards onto its top panel.
Be careful not to rest the cabinet on its door.
Attach the Base to the (C3) Cabinet using
8 (H2) Screws. Tighten with (T1) Hex Wrench.
2 PERSON TASK
C3
H2
H2
H2
H2
H2
H2
H2

8 | BDIUSA.COM INTERVAL 7247 / 7249
ASSEMBLY STEP 3. INSTALL SHELF PINS
With help from another person, carefully position
the (C3) Cabinet onto its base as shown.
Install the (H3) Shelf Pins by screwing them into
the threaded inserts on the inside of the cabinet.
Install the (H3) Shelf Pins for the (C5) Center
Shelf in their top most positions if you plan to
use a soundbar that is wider than the middle
section of the cabinet.
2 PERSON TASK
PART/DESCRIPTION QTY
H3-PINS 14
H3
H3 H3
H3
H3 H3
C3

BDIUSA.COM | 9NEED ASSISTANCE? customerservic[email protected]
ASSEMBLY
STEP 4. INSTALL SHELVES
Carefully place the (C4) Center Shelf into the (C3) Cabinet. The (C4) Center Shelf may be adjusted
by unscrewing the shelf pins and repositioning them.
Carefully place the 2 (C5) Side Shelves into the (C3) Cabinet. The (C5) Side Shelves are not
adjustable.
C4
C3
C3
C5
C5

10 | BDIUSA.COM INTERVAL 7247 / 7249
ASSEMBLY STEP 5. INSTALL BACK PANELS
The 2 (C6) Back Panels are removable and can slide towards the middle.
To install, put the top edge of the back panel into the top groove, then drop the bottom edge into
the bottom groove.
Your Interval Media Cabinet comes with 2 (H4) KLEET Cord Wraps which can be used for cord
management.
A (H5) TV Safety Strap is included. To secure your TV to the cabinet, unravel the bundle and follow
the instructions on the hang tag.
C6
C6
1
2
H4
H4
H5
Use the KLEET for
wire management
TV Safety Strap