Beckhoff CP29 Series User manual

Manual | EN
CP29xx
Control Panel
8/11/2021 | Version: 3.1

Table of contents
CP29xx 3Version: 3.1
Table of contents
1 Notes on the documentation ....................................................................................................................5
2 For your safety...........................................................................................................................................6
2.1 Description of safety symbols............................................................................................................6
2.2 Intended use......................................................................................................................................6
2.3 Fundamental safety instructions........................................................................................................7
2.4 Operator's obligation to exercise diligence ........................................................................................7
3 Product overview.......................................................................................................................................8
3.1 Structure ..........................................................................................................................................10
3.2 CP29xx-0000 interface description..................................................................................................11
3.2.1 Power supply ................................................................................................................... 11
3.2.2 USB output ...................................................................................................................... 12
3.2.3 USB input......................................................................................................................... 13
3.2.4 USB Extended input ........................................................................................................ 14
3.2.5 DVI Extended input.......................................................................................................... 15
3.3 CP29xx-0010 interface description..................................................................................................16
3.3.1 Power supply ................................................................................................................... 16
3.3.2 USB output ...................................................................................................................... 17
3.3.3 CP-Link 4 ......................................................................................................................... 18
3.4 Optional USB interface ....................................................................................................................21
3.5 Name plate ......................................................................................................................................23
3.6 Connection cables/connection kits ..................................................................................................24
3.6.1 CP29xx-0000 connection kits .......................................................................................... 24
3.6.2 CP29xx-0010 connection cables ..................................................................................... 25
4 Commissioning........................................................................................................................................26
4.1 Transport and unpacking.................................................................................................................28
4.2 Installation in the control cabinet .....................................................................................................29
4.2.1 Dimensions ...................................................................................................................... 29
4.2.2 Installation in the control cabinet ..................................................................................... 30
4.3 Connecting the Control Panel..........................................................................................................31
4.3.1 Installing the supply cable................................................................................................ 32
4.3.2 Grounding the Control Panel ........................................................................................... 34
4.3.3 Connecting cables and power supply .............................................................................. 35
5 Shutting down..........................................................................................................................................36
5.1 Disconnecting the power supply and cables ...................................................................................36
5.2 Disassembly and disposal ...............................................................................................................37
6 Servicing and maintenance ....................................................................................................................38
7 Troubleshooting ......................................................................................................................................40
8 Technical Data .........................................................................................................................................41
9 Appendix ..................................................................................................................................................42
9.1 Service and support.........................................................................................................................42
9.2 Approvals.........................................................................................................................................43

Table of contents
CP29xx4 Version: 3.1

Notes on the documentation
CP29xx 5Version: 3.1
1 Notes on the documentation
This description is only intended for the use of trained specialists in control and automation engineering who
are familiar with the applicable national standards.
The following instructions and explanations must be followed during installation and commissioning of the
components. The responsible staff must ensure that the application or use of the products described satisfy
all the requirements for safety, including all the relevant laws, regulations, guidelines and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development. For that reason the documentation is not in every case checked for consistency with
performance data, standards or other characteristics. In the event that it contains technical or editorial errors,
we retain the right to make alterations at any time and without warning. No claims for the modification of
products that have already been supplied may be made on the basis of the data, diagrams, and descriptions
in this documentation. All illustrations shown are only examples. The configurations depicted may deviate
from the standard.
Trademarks
Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD ®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,
Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of
Beckhoff Automation GmbH.
Other designations used in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owners.
Patents
The EtherCAT Technology is covered, including but not limited to the following patent applications and
patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with the corresponding applications
and registrations in various other countries. The TwinCAT Technology is covered, including but not limited to
the following patent applications and patents: EP0851348, US6167425 with corresponding applications or
registrations in various other countries.
Copyright
© Beckhoff Automation GmbH & Co. KG. Publication of this document on websites other than ours is
prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the
grant of a patent, utility model or design.
Delivery state
All the components are supplied in particular hardware and software configurations appropriate for the
application. Changes to the hardware or software configuration are permitted, provided they are within the
specified limits for power consumption and power dissipation (please refer to the respective data sheet).
Delivery conditions
In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

For your safety
CP29xx6 Version: 3.1
2 For your safety
The safety chapter explains the safety symbols used and their meanings. They contain fundamental safety
instructions that are essential for the avoidance of personal injuries and damage to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1 Description of safety symbols
The following safety symbols are used in these operating instructions. In order to avoid personal injuries and
damage to property, read and follow the safety and warning notices.
Warning of personal injuries:
DANGER
Disregarding the safety notice will lead to death or serious injuries.
WARNING
Disregarding the safety notice may lead to death or serious injuries.
CAUTION
Disregarding the safety notice may lead to minor injuries.
Warning of damage to property:
NOTE
Disregarding the notice may lead to damage to property.
2.2 Intended use
The CP29xx multi-touch built-in Control Panel is designed for industrial applications in machine and plant
engineering. A display with multi-finger touch screen is installed in an aluminum housing. The Control Panel
is installed in the front of control cabinets.
The DVI/USB extension technology integrated in the CP29xx-0000 Control Panel enables the Panel to be
located up to 50 m away from the PC.
The CP-Link 4 technology integrated in the CP29xx-0010 Control Panel enables the Panel to be located up
to 100 m away from the PC via a CP-Link4 cable with optionally integrated or separate 24 V power supply,
depending on the transmitter module.
The front of the Control Panel is designed for an IP65 working environment. It offers full protection against
contact and against water jets (nozzle) from any angle and against dust. The rear of the Control Panel is
designed for an IP20 working environment. It is protected against the penetration of fingers and solid foreign
bodies of 12.5 mm or larger in size. It is not protected against water. The specified limits for technical data
must be adhered to.
The Control Panel can be used within the documented operating conditions.
Improper use
Do not use the device outside the documented operating conditions.

For your safety
CP29xx 7Version: 3.1
2.3 Fundamental safety instructions
The following safety instructions must be observed when handling the device.
Application conditions
• Do not use the device under extreme environmental conditions. Protect the back of the device from
dust, moisture and heat and keep the ventilation slots clear.
• Never use the device in potentially explosive atmospheres.
• Do not carry out any work on the device while it is live. Always switch off the supply voltage for the
device before mounting it, replacing device components or rectifying malfunctions.
• Never connect the device during a thunderstorm. There is a risk of electric shock.
• Ensure that the device has a protective and functional earth connection.
Damage to property, loss of data and impairment of functions
• Ensure that only trained specialists with a control and automation technology background, operate the
device. Use by unauthorized persons can lead to damage to property and loss of data.
• Protect the power supply cable with a fuse with a max. rating of 16A. The fuse serves to protect the
supply line in the event of a short circuit.
• In case of fire, extinguish the device with powder or nitrogen.
2.4 Operator's obligation to exercise diligence
The operator must ensure that
• the products are used only for their intended purpose (see chapter 2.2 Intended use [}6]).
• the products are only operated in sound condition and in working order.
• the products are operated only by suitably qualified and authorized personnel.
• the personnel is instructed regularly about relevant occupational safety and environmental protection
aspects, and is familiar with the operating instructions and in particular the safety instructions contained
herein.
• the operating instructions are in good condition and complete, and always available for reference at the
location where the products are used.

Product overview
CP29xx8 Version: 3.1
3 Product overview
The Beckhoff Panel generation with industrially-compatible multi-touch display is designed for control cabinet
installation. The devices offer suitable solutions for a variety of applications. The model variety ranges from
different display sizes and formats to custom models. This Panel generation is also suited for single-touch
applications.
The Control Panel has the following features:
• Different display sizes and resolutions, landscape and portrait mode:
◦ 7-inch, 800 x 480 (5:3)
◦ 12-inch, 800 x 600 (4:3)
◦ 12.1-inch, 1280 x 800 (16:10)
◦ 15-inch, 1024 x 768 (4:3)
◦ 15.6-inch, 1366 x 768 (16:9)
◦ 18.5-inch, 1366 x 768 (16:9)
◦ 19-inch, 1280 x 1024 (5:4)
◦ 21.5-inch, 1920 x 1080 (16:9)
◦ 24-inch, 1920 x 1080 (16:9)
• Multi-finger touch screen (PCT): e.g. for 10-finger touch
• Aluminum housing with glass front, IP65 at the front, IP20 at the rear; the housing surface is electrically
insulating
• CP29xx-0000 interfaces:
◦ 2x USB output
◦ 1x USB input
◦ 1x RJ45 for USB Extended
◦ 1x DVI input
• CP29xx-0010 interfaces:
◦ 1x RJ45 for CP-Link 4
◦ 2x USB output
• Control cabinet installation via pull-out clamping levers for fast installation without loose parts
Push button extension
The following Control Panels are optionally available in landscape mode ex works with a corresponding push
button extension, C9900-G0xx:
• CP2912 (C9900-G002)
• CP2913 (C9900-G009)
• CP2915 (C9900-G003)
• CP2916 (C9900-G004)
• CP2918 (C9900-G005)
• CP2919 (C9900-G006)
• CP2921 (C9900-G008)
• CP2924 (C9900-G007)
Explanations of the push button extension and the functions can be found in the installation and operating
instructions for the C9900-G0xx. Figure 1 shows an example of a Control Panel without (1) and with (2) push
button extension.

Product overview
CP29xx 9Version: 3.1
1
2
Fig.1: CP29xx_without and with push button extension

Product overview
CP29xx10 Version: 3.1
3.1 Structure
Figure 2 shows an example of the device configuration for all CP29xx variants.
The interfaces of the Control Panel in the connection block vary, depending on the product variant.
Otherwise, there are no differences in the external design of the device.
23 4
567
10 9 8
1
Fig.2: CP29xx_configuration
Table1: Legend for CP29xx configuration
No. Component Description
1 Display and touch screen
glass
Operating the Control Panel
2 Clamping lever Mounting the Control Panel in the control cabinet
3 Connection block Access to the interfaces
4 Name plate Information on the Control Panel equipment
5 Power supply (X101) Connection of the power supply and protective earth of the Control
Panel
6 Grounding bolt Functional earth of the Control Panel
7 USB output (X102, X103) Connection of peripheral devices
8 USB input (X104) Connection of Control Panel and Industrial PC up to a maximum of 5
m
9 RJ45 for USB Extended
(X105)
Connection of Control Panel and CU8801 USB to USB Extended
converter box up to 50 m distance
10 DVI input (X106) Transmission of DVI from Industrial PC to Control Panel up to 50 m
distance

Product overview
CP29xx 11Version: 3.1
3.2 CP29xx-0000 interface description
The CP29xx-0000 features the following interfaces, which are located at the back of the housing:
• Power supply (X101)
• USB output (X102, X103)
• USB input (X104)
• RJ45 for USB Extended (X105)
• DVI input (X106)
3.2.1 Power supply
The Control Panel is supplied with a nominal input voltage of 24 V. The five-pin voltage socket (X101) is
used for connection to the power supply and the protective earth of the Control Panel.
X101
1 2 345
Fig.3: CP29xx_voltage socket pin numbering
Table2: Voltage socket pin assignment
Pin Signal Description
1 NC not used
2 NC not used
3 Protective earth
4 - 24 V power supply, negative pole
5 + 24V 24 V power supply, positive pole
The plug for the power supply is specified for 16A and can accommodate wire cross-sections of up to
1.5mm2. For long supply lines, use 1.5 mm2 cables to achieve a low voltage drop on the supply line. There
should be at least 22 V at the power supply plug of the Control Panel, so that the Control Panel remains
switched on during voltage fluctuations. The plug is included in the delivery. For information regarding
replacement plugs and strain relief housing, refer to chapter 4.2.1 Installing the supply cable [}32].

Product overview
CP29xx12 Version: 3.1
3.2.2 USB output
The CP29xx-0000 Control Panel has two USB outputs (X102, X103) with type A sockets. They are used to
connect peripheral devices with USB interfaces. USB specification 3.0 is supported for connection distances
up to 3 m. USB specification 2.0 is supported for connection distances of more than 3 m or when USB-E is
used.
1 2 3 4
4
321
X102
X103
56
7
89
56
7
89
Fig.4: CP29xx USB interface pin numbering
Table3: USB interface pin assignment
Pin Connection
Shield GND
1 Vbus
2 D -
3 D +
4 GND
5 StdA_SSRX -
6 StdA_SSRX +
7 GND_DRAIN
8 StdA_SSTX -
9 StdA_SSTX +
For USB 2.0, only pins 1 to 4 and the shield are relevant.

Product overview
CP29xx 13Version: 3.1
3.2.3 USB input
The CP29xx-0000 Control Panel has a USB input (X104) with socket type B. The Control Panel is connected
to the Industrial PC via the USB input. USB specification 3.0 is supported for connection distances up to 3 m.
USB specification 2.0 is supported for connection distances up to 5 m.
12
3
4
X104
5 6 78 9
Fig.5: CP29xx_USB input pin numbering
Table4: USB interface pin assignment
Pin Connection
Shield GND
1 Vbus
2 D -
3 D +
4 GND
5 StdA_SSRX -
6 StdA_SSRX +
7 GND_DRAIN
8 StdA_SSTX -
9 StdA_SSTX +
For USB 2.0, only pins 1 to 4 and the shield are relevant.

Product overview
CP29xx14 Version: 3.1
3.2.4 USB Extended input
The Control Panel CP29xx-0000 has a USB Extended input (X105) in the form of an RJ45 socket. The
Control Panel is connected to the CU8801 USB to USB Extended converter box via the interface. The
connection is made via a standard RJ45 cable, i.e. not crossed. The interface transmits USB 2.0 with 480
Mbit/s. The socket does not represent an Ethernet connection.
To realize a distance of 50 m without hubs, USB Extended converts the USB signal so that it can be
transmitted via a 50 m CAT-5 cable. In the Control Panel the signal is converted back to USB.
81
X105
Fig.6: CP29xx_USB-E input pin numbering
Table5: USB E input pin assignment
Pin Signal Description
1 T2 + Pair 2
2 T2 -
3 T3 + Pair 3
4 T1 + Pair 1
5 T1 -
6 T3 - Pair 3
7 T4 + Pair 4
8 T4 -

Product overview
CP29xx 15Version: 3.1
3.2.5 DVI Extended input
The CP29xx-0000 Control Panel has a DVI Extended input (X106). It is used to transmit the graphics signal
from the Industrial PC to the Control Panel.
The graphics signal is transferred directly via a DVI cable over a distance of 50 m max. Such a cable length
leads to strong distortion of the graphics signal on arrival at the Control Panel. A signal processor is used in
the Control Panel to fully restore the DVI signal. The Industrial PC requires a conventional DVI output.
18
16
24
17
9
X106
Fig.7: CP29xx_DVI Extended input pin numbering
Table6: DVI Extended interface pin assignment
Pin Connection Pin Connection Pin Connection
1 TDMS Data 2 - 9 TDMS Data 1 - 17 TDMS Data 0 -
2 TDMS Data 2 + 10 TDMS Data 1 + 18 TDMS Data 0 +
3 TDMS Data 2/4 Shield 11 TDMS Data 1/3 Shield 19 TDMS Data 0/5 Shield
4 TDMS Data 4 - 12 TDMS Data 3 - 20 TDMS Data 5 -
5 TDMS Data 4 + 13 TDMS Data 3 + 21 TDMS Data 5 +
6 DDC Clock 14 + 5V Power 22 TDMS Clock Shield
7 DDC Data 15 Ground (+ 5 V, Analog H/V
Sync)
23 TDMS Clock +
8 Analog Vertical Sync 16 Hot Plug Detect 24 TDMA Clock -
C5 GND

Product overview
CP29xx16 Version: 3.1
3.3 CP29xx-0010 interface description
The CP29xx-0010 features the following interfaces, which are located at the back of the housing:
• Power supply (X101)
• USB output (X102, X103)
• RJ45 for CP-Link 4 (X104)
3.3.1 Power supply
The Control Panel is supplied with a nominal input voltage of 24 V. The electrically isolated five-pin voltage
socket (X101) is used for connection to the power supply and the protective earth of the Control Panel.
If the Control Panel is connected to an Industrial PC via the CU8803 transmitter box, no additional power
supply to the Control Panel is required via the voltage socket.
X101
1 2 345
Fig.8: CP29xx_voltage socket pin numbering
Table7: Voltage socket pin assignment
Pin Signal Description
1 NC not used
2 NC not used
3 Protective earth
4 - Negative pole Supply voltage 24 V
5 + 24V Positive pole Supply voltage 24V
The plug for the power supply is specified for 16A and can accommodate wire cross-sections of up to
1.5mm2. For long supply lines, use 1.5 mm2 cables to achieve a low voltage drop on the supply line. There
should be at least 22 V at the power supply plug of the Control Panel, so that the Control Panel remains
switched on during voltage fluctuations. The plug is included in the delivery. For information regarding
replacement plugs and strain relief housing, refer to chapter 4.2.1 Installing the supply cable [}32].

Product overview
CP29xx 17Version: 3.1
3.3.2 USB output
The CP29xx-0010 Control Panel has two USB outputs (X102, X103) with type A sockets. They are used to
connect peripheral devices with USB interfaces. USB specification 2.0 is supported.
1 2 3 4
4
321
X102
X103
Fig.9: CP29xx USB interface pin numbering
Table8: USB interface pin assignment
Pin Connection
Shield GND
1 Vbus
2 D -
3 D +
4 GND

Product overview
CP29xx18 Version: 3.1
3.3.3 CP-Link 4
The CP29xx-0010 Control Panel has a CP-Link 4 input (X104) in the form of an RJ45 socket. This is not an
Ethernet port. Via the interface the Control Panel can be connected to an Industrial PC over a distance of up
to 100 m. The connection can be made either directly with an Industrial PC with a corresponding PCIe
module or indirectly via an intermediate transmitter box.
8 1
X104
Fig.10: CP29xx-0010_CP-Link 4 interface pin numbering
Table9: CP-Link 4 pin assignment
Pin Signal Description
1 0 + Pair 0
2 0 -
3 1 + Pair 1
4 2 + Pair 2
5 2 -
6 1 - Pair 1
7 3 + Pair 3
8 3 -
On an Industrial PC with PCIe module, CP-Link 4 is available as a two-cable display link. The Control Panel
can be connected directly to the Industrial PC via the module. USB 2.0 (100 MBit/s) and DVI are transmitted
together via a CP-Link 4 cable. An additional power supply is required for the CP29xx-0010 (see Fig. 11).
24 V 24 V
CAT.6A(100 m)
C6032 mit CP-Link 4 Modul CP29xx-0010
CP39xx-0010
CP-Link 4 (100 m)
Fig.11: CP29xx-0010_CP-Link 4
CP-Link 4 with transmitter box
If the Industrial PC is not equipped with a PCIe module, a transmitter box is required for connecting a
CP29xx-0010. The transmitter boxes CU8802 (two-cable display link) and CU8803 (One Cable Display Link)
are available for this purpose.
With the CU8802, the Industrial PC is connected to the transmitter box via USB and DP/DVI. The transmitter
box is then connected to the Control Panel via the CP-Link 4 connection of the transmitter box using a CP-
Link 4 cable. USB and DVI are transmitted together via this cable. An additional power supply is required for
the CP29xx-0010 (Two Cable Display Link). Fig. 12 shows the wiring with the CU8802.

Product overview
CP29xx 19Version: 3.1
0000
CU8802-0000
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
Fig.12: CP29xx-0010_CP-Link 4, CU8802
With the CU8803, the Industrial PC is also connected to the transmitter box via USB and DP/DVI. The
transmitter box is then connected to the Control Panel via the CP-Link 4 connection of the transmitter box
using a CP-Link 4 cable. With this box, USB, DP/DVI and power supply can be transmitted together via the
cable (One Cable Display Link). No additional power supply is required for the CP29xx-0010. Fig. 13 shows
the wiring with the CU8803.
CU8803-0000
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
Fig.13: CP29xx-0010_CP-Link 4, CU8803
The following ordering options are available for the transmitter boxes:
• CU8802-0000

Product overview
CP29xx20 Version: 3.1
• CU8802-0001
• CU8803-0000
• CU8803-0001