BenQ 0.3 Wall Mount User manual

BenQ America Corp.
15375 Barranca Parkway. Suite A-205. Irvine, CA 92618 Tel: [phone] www.BenQ.us
BenQ is a registered trademark of BenQ Corp. DLP® is a registered trademark of Texas Instruments. All rights reserved.
Product names, logos, brands, and other trademarks featured or referred to in this materials are the property of their respective trademark holders.
Specifications subject to change without notice.
Education Deal Registration – http://promotions.benq.us/education/
B2B Deal Registration - http://promotions.benq.us/dealregistration/
Fast and Easy Installation to Keep Things Lookin’ Great!
Designed to provide an easy and quick solution to mount a BenQ short-throw projector, this
installer-friendly wall mount is smartly constructed with premium steel and aluminum to provide
the strongest hold and stylishly polished with a pristine white nish to keep any room lookin’
great! Together with an adjustable tilt angle of up to ± 10 degrees, you’ll get to enjoy the most
exible viewing support for just about any setting!
*Custom specications may vary by model. Please refer to the specication chart to review each model in detail.
Wall Mount for
BenQ Short
Throw Projector!
Wall Mount 12-20-11-BQus

Ultra Short Throw Wall Mount (0.3 Throw Ratio, P/N 5J.J3A10.001)
Ultra Short Throw Wall Mount (0.4 Throw Ratio, P/N 5J.J4V10.001)
Short Throw Wall Mount (0.6 Throw Ratio, P/N 5J.J4R10.001)
Guide sheet for hole drilling
Wall Mount for BenQ Short Throw Projector
Ultra Short Throw Wall Mount (0.3 Throw Ratio, P/N 5J.J3A10.001)
Connection plate A
Steel/Aluminum alloy
Kg (lbs)
18.19”
+/-10˚
Rotation angle
26.46 lbs (12kg)
M4
+/-10°
4.33” x 8.46” x 21.97”
Material
Weight
Size (W x H x L)
Maximum distance from wall
Load
Screw
Tilt angle
4.33”
11.46”
7.36”
8.46”
21.97”
Max: 18.19” Min: 15.56”
7-Ø5
6.44”
3.94”
AConnection plate
Steel/Aluminum alloy
Kg (lbs)
27.76”
+/-10˚
Rotation angle
26.46 lbs (12kg)
M4
+/-10°
4.33” x 8.46” x 31.61”
Material
Weight
Size (W x H x L)
Maximum distance from wall
Load
Screw
Tilt angle
4.33”
11.46”
7.36”
8.46”
31.6”
Max: 27.76” Min: 20.08”
7-Ø5
6.44”
3.94”
Ultra Short Throw Wall Mount (0.4 Throw Ratio, P/N 5J.J4V10.001)
Short Throw Wall Mount (0.6 Throw Ratio, P/N 5J.J4R10.001)
BConnection plate
Steel/Aluminum alloy
Kg (lbs)
50”
+/-10˚
Rotation angle
26.46 lbs (12kg)
M4
+/-10°
4.33” x 8.46” x 53.86”
Material
Weight
Size (W x H x L)
Maximum distance from wall
Load
Screw
Tilt angle
4.33”
10”
2.68”
8.46”
53.86”
Max: 50” Min: 32.68”
9-Ø5
7.87”
3.53”
Connection plate A Mark A ==> MX880UST
Mark B ==> MX850UST / MW851UST
Connection plate B
A
A
C
B
B
C
A
C
B
B
B
Lens Direction Lens Direction
B
A
A
A
A
Connection plate A Connection plate B
Mark A ==> MP772ST / MP776ST / MP782ST / MX810ST / MW811ST / MX812ST / MX813ST
Mark B ==> MW814ST / LX60ST / LW61ST
Mark C ==> MP780ST / MW860USTi / MP780ST+
Guide sheet for hole drilling Please visit www.benq.com for the latest guide sheet for hole drilling