Better Bathrooms Arissa ARIMB009 User manual

Product
ARIMB009 - Arissa Matt Black Freestanding Bath Shower Mixer Tap
ARIBB009 - Arissa Brushed Brass Freestanding Bath Shower Mixer Tap
ARIMW00 - Arissa Matt White Freestanding Bath Shower Mixer Tap
ARIVRG00 - Arissa Vapour Rose Gold Freestanding Bath Shower Mixer
Tap
Single-person assembly
Tools required
We always recommend using professional
tradespeople to install your product
V1_3/ /2022

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
log in to your account and contact our customer services team via your self-serve
portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us
Important information
Please read these instructions thoroughly and retain for future reference
Installation must be carried out in compliance with The Water Fittings Regulations
and Scottish Water Byelaws.
The system must be flushed prior to installation
Minimum and Maximum working pressure : 1 - 5 bar
Pressures must be equal for optimum performance
Please do not connect hot and cold water supply lines in reverse. This could result
in hot water flowing from cold line and cause scalding.
The feed-water temperature of water shall not exceed 85°C.
Exceeding 85°may cause scalding, the service life of faucets might be shortened,
or the faucet might be damaged.
After installation, please make sure the faucet is securely mounted and checked for
leaks.

Parts / Diagrams
N
o
Part
Description
No Part Description
1 Body with
spout
assembled
9 Base assembled
2 Aerator with
key
10 Fixing bolts
3 Divertor
knob
11 Mounting seat
Handle
assembled
12 Hand shower
5 Dome 13 Platic protective
sleeve
6 Locknut 1 Non-return valve
7 Cartridge 15 Connector
8 Inlet hoses 16 Shower hose

Dimensions
Tools required
Spanner
Drill and bit
Hammer

Installation
Mark out the fixing positions on the flooring basing
on the body and drill 3 holes.
Fix the floor screws into the holes.
Push the mounting seat over floor screws and fasten
with steel gasket and nut. Connect the inlet hoses
with hot (Left) and cold (right)water pipes.

Slide down the base until it reaches the floor.
Waterproof adhesive is recommended to be applied.
Turn on water supply and check for leaks.
Operation

Troubleshooting
Issues Inspection Item
Poor water flow  Is there blockage within the filter mesh on
aerator(2)
Was the system flushed prior to installation
Is the mixer cartridge(7) free from debris
Is there debris inside the non-return valve(1 )
Water leak Is there damage or dirt with the O-ring in the
aerator(2)
Is the locknut(6) on top of cartridge fully
tightened
Is there damage or dirt within the O-rings of the
cartridge(7)
Is there damage with rubber washer in the nuts
of inlet hoses(8)
Is there damage with O-rings on the inlet
hoses(8)
Is there damage or dirt with the O-rings in the
non-return valve(1 )
Is there damage or dirt with the O-rings in the
connector(15)
Is there damage or dirt in the nuts of shower
hose(16)
Handle loose Is the screw inside the handle( ) fully tightened
Is the locknut(6) on top of cartridge fully
tightened
Body loose Is the floor-mounting kit underneath fully
tightened

Maintenance
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do
not use any abrasive cleaning agents or materials. If any harsh chemicals come into
contact with the surface of the product, rinse and wipe clean immediately.