Beyerdynamic Byron BTA User manual

Byron BTA
BLUETOOTH IN-EAR HEADSET
Manual

english
Byron BTA – In-ear headset 3
Contents
1. Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. ow to wear the in-ear headset . . . . . . . . . . . . . . . . . . . . 8
7. Button Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Getting started with your Byron BTA . . . . . . . . . . . . . . . 11
8.1 Pairing to your mobile phone . . . . . . . . . . . . . . . . 11
8.2 Multi point setting . . . . . . . . . . . . . . . . . . . . . . . . 11
8.3 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.4 Factory reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.5 Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. What does the LED colour mean? . . . . . . . . . . . . . . . . . 13
10. FAQ & Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . 13
11. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
12. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
15. Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16. Simplified EU Declaration of Conformity . . . . . . . . . . . . 15

Byron BTA – In-ear headset
4
Thank you for selecting the Byron BTA stereo Bluetooth in-ear head-
set from beyerdynamic. Please take some time to read carefully
through this manual before using the product. Please keep the
manual. When passing on the headset to a third party, please pass
on the manual as well.
1. Safety instructions
Warning: When connecting the in-ear headset, make sure that
you have turned the volume down to the minimum.
Adjust the volume only after the in-ear headset are in
place. To avoid any potential damage to your hearing,
do not use the in-ear headset at loud volumes for
extended periods of time. As a rule of thumb, when you
have the in-ear headset on, set the volume to a level at
which you can still hear your own voice when you speak
at a normal volume while listening.
We would like to point out that listening at high
volumes over a long period of time may damage your
hearing irreversibly.
Make sure that the set volume is not too high.
Rule of thumb: The higher the volume, the shorter the
time of listening. According to employer’s regulations
for safety and health the noise exposure should not
exceed 85 dB (low volume) when working with an
allowed time of listening of 8 hours at maximum. If the
volume is increased by 3 dB, the allowed time of
listening is halved, i.e. with 88 dB the time of listening
is 4 hours, with 91 dB 2 hours and so on.
Danger!
In-ear headsets dramatically reduce your ability to hear ambient
noise. Using the in-ear headsets while in road traffic is potentially
very dangerous and is therefore prohibited by law. Also, please make
sure that you do not use your in-ear headset when in the vicinity of
possibly dangerous machines and tools.
Risk of injury!
When wearing wired in-ear headphones, avoid any sudden move-
ments. You could seriously injure yourself, especially if you have any
piercings or wear earrings or glasses, etc. that can get caught in the
wire.
Altered auditory perception
Many people need some time to get used to wearing in-ear headsets.
Your auditory perception of your own voice and body, and even the
sounds in your inner ear while walking, are different from “normal”
situations when you are not wearing an in-ear headset. This strange
sensation will usually abate after wearing in-ear headsets for a while.

english
Byron BTA – In-ear headset 5
2. Features
• Premium Sound
(MSTS™ Tuning Technology & apt-X codec & AAC codec)
MSTS™ Tuning Technology together with compression codec
apt-X & AAC codec enables you to enjoy premium hi-fi stereo
sound.
With a built-in DSP chip, it supplies optimal call quality by noise
reduction and echo cancellation.
• Multi Point
• Bluetooth 4.2
• Voice prompts
• Firmware upgrade
The latest firmware is available for optimised usage.
Its functions are variable depending on the mobile phone.
• Fixing magnet
There is a built-in magnet to hold the L&R earphone together,
making it easier to carry when not using.
Caution:
American eart Association and British Drug Administration warn
that magnets can affect medical equipments (pacemaker,
defibrillators, insulin pump and other electronic medical equip-
ment) if the distance between magnets and medical equipment
is within 15 cm).
Please do not use this product before you consult with your
doctor, if you are using the mentioned medical equipment.
Please do not place this product around areas, influenced by
magnetism.
Of magnetic products such as a credit card, telephone card, bank
account or ticket, the information can be deleted.
3. Accessories
1 pair of in-ear headset
4 pairs of eartips (1x S, 2x M, 1x L)
1 pair of ear hooks
1 charging cradle
1 cable clip

Byron BTA – In-ear headset
6
4. Controls and indicators
햸
햲
햳
햴
햵
햶
햷
햹
햲Microphone
햳LED guide light for headset
status LED
햴Charging contacts
햵Volume up, next song etc.
햶Main function button (MFB)
for turning on/off, answer/
reject/convert a call/ play/ etc.
햷Volume down, previous song
etc.
햸Ear hook for comfortable
wearing
햹Fixing magnet for holding
L/R earphone together while
not in use

english
Byron BTA – In-ear headset 7
Charging
Make sure that your headset is fully charged before you use it.
The LED glows “red” during charging and will turn “blue” when fully
charged.
5. Operating instructions
When turning the headset on/off or selecting the pairing mode, you
will hear a voice prompt.
Turn on the in-ear headset
Press the MFB button until you hear “Power on” and the blue LED
glows.
Turn off the in-ear headset
When you press the MFB button for a longer time (approx. 5 seconds),
the purple LED will glow and the headset is turned off after you hear
“Power off”.

Byron BTA – In-ear headset
8
6. How to wear the in-ear headset
Fix the ear hook first, if you
need a stronger fit.
Then attach the eartip to the
earphone.
Fix the eartip to the ear.
Wear the earphone as shown in
the illustration.
Tip
Select the eartip size that fits
you best. It is comfortable to
wear the in-ear headset with
the supporting ear hook.

english
Byron BTA – In-ear headset 9
7. Button guide
You can easily control the in-ear headset with these 3 buttons.
Volume up
Volume down
MFB
Basic button control
Press the MFB button
Answer a call . . . . . . . . . Press briefly
End a call. . . . . . . . . . . . Press briefly
Turn on headset . . . . . . . Press for 2 seconds
(If there is a paired device, it connects to the paired device.)
Turn off headset . . . . . . . Press for 4 seconds
If you press the MFB button for a longer time, the purple LED glows
and the in-ear headset will be turned off after you hear “Power off”.
Pairing mode . . . . . . . . . Press for 4 seconds when you turn on
(if the headset has been connected to a
device before, the headset must be
turned off and turned on again as
described before)
Reject a call . . . . . . . . . . Press for 1 second
Convert a call . . . . . . . . . Press briefly during call
Play/Pause . . . . . . . . . . . Press briefly
Stop. . . . . . . . . . . . . . . . Press for 1 second (during play)

Byron BTA – In-ear headset
10
Press the Volume up button
Volume up (+). . . . . . . . . Press briefly
Mic mute . . . . . . . . . . . . Press for 1 second (during call)
Next song . . . . . . . . . . . . Press for 1 second (during play)
Press the Volume down button
Volume down (-) . . . . . . . Press briefly
Mic mute . . . . . . . . . . . . Press for 1 second (during call)
Previous song . . . . . . . . . Press for 1 second (during play)
Factory reset
Press the buttons in the following order:
The purple LED will glow and the in-ear headset will be initialised.
After a factory reset, pair the in-ear headset again for use.

english
Byron BTA – In-ear headset 11
8. Getting started with your Byron BTA
8.1 Pairing to your mobile phone
Before you use the Byron BTA in-ear headset, you have to pair
it with your mobile phone or Bluetooth enabled device. The
pairing process may be different with various mobile phone
makers. Please refer to the appropriate mobile phone manual.
When the in-ear headset is turned off, press the MFB
button for 6 seconds to start the pairing mode (blue LED is
continuously on).
Select the Bluetooth mode on your mobile phone.
Pairing on first purchasing
• Select the pairing mode with the Bluetooth in-ear headset.
• Pairing with mobile phone (you need to pair with your
mobile within 3 minutes).
• On first purchasing, the in-ear headset enters into pairing
mode automatically when the power is on and the blue LED
is continuously on.
Pairing with mobile phone setting
• Activate the Bluetooth function on your mobile phone
according to the phone manual, search the in-ear headset
model name and select. Then “Pairing” is displayed. (Some
mobile phones need pass key (PIN), then enter 0000).
• If pairing is successful, the message “Connected to phone
and media audio” is displayed and the blue LED glows
5 times. Now it is ready to use.
Pairing to other devices
• Select the pairing mode with the Bluetooth in-ear headset.
• Deactivate the Bluetooth function of the connected device
if there is a connected device.
• Press the MFB button for 4 seconds to turn off.
• Press the MFB button for 2 seconds. The in-ear headset is
turned on and enters into the pairing mode.
Pairing with mobile phone
• Follow the pairing procedure as described above in the
paragraph “Pairing with mobile phone setting”.
• If pairing is successful, the message “Connected to phone
and media audio” is displayed and the blue LED glows
5 times. Now it is ready to use.
8.2 Multi point setting
It is possible to connect up to 8 Bluetooth enabled devices and
2 devices can be used simultaneously.
Setting Multi point
• Please pair the Bluetooth in-ear headset to the first device
according to the pairing process (refer to pairing process).
• Turn off the Bluetooth in-ear headset.

Byron BTA – In-ear headset
12
• Press the MFB button for around 4 seconds until the blue
LED is continuously on.
• Please pair the Bluetooth in-ear headset to the 2nd device
according to the pairing process.
• Then, turn off the Bluetooth in-ear headset and turn on
again, it will be connected to two devices.
How to use Multi point
• At the status of connecting two devices, press the MFB
button to answer a call when there is an incoming call.
• At the status of connecting two devices, press the MFB
button to listen the music that was played lately.
8.3 Call
• Answering a call:
Press the MFB button to answer a call.
• Ending a call:
Press the MFB button shortly to end a call.
• Rejecting a call:
During an incoming call, press the MFB button for about
1 second.
• Converting a call:
During a call with mobile, press the MFB button to convert
to the headset (to call with the mobile again, use your
mobile phone menu).
• Volume control:
With the + and – buttons you can control the volume.
• Microphone Mute:
If you press the + or – button for about 1 second during a
call, the microphone will mute.
During mute, it will be released, if you press the – button
for about 1 second.
• A waiting call and putting a call on hold:
This feature allows you to put a call on hold during a
conversation and answer a waiting call.
Press the + button for approximately 1 second to put an
active call on hold and answer a waiting call.
Give the + button a long press to switch between two calls.
To end a call press the MFB button briefly.
8.4 Factory reset
• Press the buttons in the following order:
The purple LED will glow and the in-ear headset will be
initialised. After a factory reset, pair the in-ear headset
again for use.

english
Byron BTA – In-ear headset 13
8.5 Playing music
• To enjoy the best audio quality, please set 70~80% from
the max. volume in your device.
• On first purchasing, the volume sets in level 8 of all 15
levels (please adjust with + or – button for volume).
Play / Pause: Press the MFB button briefly
Stop: Give the MFB button a long press
Volume up: Press the + button briefly
Volume down: Press the – button briefly
Next song: Give the + button a long press
Previous song: Give the – button a long press
9. What does the LED colour mean?
10. FA & Troubleshooting
• I hear crackling noise
– For the best audio quality, always place your in-ear headset close
to the mobile phone.
• I cannot hear anything
– Increase the volume on the headphone.
– Make sure that the in-ear headset is paired with the phone.
– If the in-ear headset fails to connect when you pressed the MFB
button, try to connect again by following the pairing procedure.
• I have problems with pairing even though my phone indicates
otherwise
– Please delete the in-ear headset paired to your mobile phone and
pair the in-ear headset again.
Please refer to set up “Pairing mode”.
• Will the Byron BTA work with other Bluetooth equipment?
– The Byron BTA is designed to work with Bluetooth mobile,
computer or portable audio devices which are built in. It can also
work with other Bluetooth devices that are compliant with
Bluetooth version 1.1/1.2/2.0/2.1+EDR/3.0/4.0 and that support
SP, FP, A2DP and AVRCP.
11. Maintenance
• Make sure the in-ear headset is turned off when storing, and
protect it safely when it is not in use.
• Sunlight and high temperatures can affect battery life of the
Byron BTA and may be the cause of malfunction.
Status LED indication
Standby LED off (if you press the button, the blue
LED blinks 5 times)
Battery is running low Red light blinks
Charging Red light ON
Fully charged Blue light ON
Pairing mode Blue light ON

Byron BTA – In-ear headset
14
•igh temperatures may also degrade performance.
•Do not expose the Byron BTA in-ear headset to rain or other
liquids.
• Prevent babies, children or pets to bite or suck the in-ear headset.
• Please do not disassemble.
• Please make sure to use certified power supplies
(rated voltage: 5 V).
12. Specifications
Talk time . . . . . . . . . . . . . . . . . . . . up to 9 hrs
Music play time . . . . . . . . . . . . . . . up to 7.5 hrs
Standby time . . . . . . . . . . . . . . . . . up to 5 days
Charging time. . . . . . . . . . . . . . . . . about 1.5 hrs
Size. . . . . . . . . . . . . . . . . . . . . . . . 8.9 x 56 x 5.6 mm
Cable length. . . . . . . . . . . . . . . . . . 570 mm
Battery. . . . . . . . . . . . . . . . . . . . . . Rechargeable Lithium
Polymer
Weight. . . . . . . . . . . . . . . . . . . . . . about 12 g
Operation range . . . . . . . . . . . . . . . within 10 m
Bluetooth profile . . . . . . . . . . . . . . . eadset profile
A2DP
AVRCP
SPP
Bluetooth profile . . . . . . . . . . . . . . . Ver. 4.2
The operation time may vary, depending on the connected device or
setting status.
13. Disposal
This symbol on the product, in the instructions or on
the packaging means that your electrical and electronic
equipment should be disposed at the end of its life
separately from your household waste. There are
separate collection systems for recycling in the EU. For
more information, please contact the local authority or
your retailer where you purchased the product.
14. Battery disposal
This symbol means that according to local laws and
regulations your product and/or its battery shall be
disposed of separately from household waste. When this
product reaches its end of life, take it to a collection point
designated by local authorities. The separate collection
and recycling of your product and/or its battery at the
time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects
human health and the environment.
• Old batteries may contain substances that are harmful to your
health and environment.

english
Byron BTA – In-ear headset 15
•Dispose used batteries always according to the applicable
disposal regulations. Please do not throw used battery packs into
the fire (danger of explosion) or your household rubbish, take them
to your local collection points. The return is free and required by
law. Please dispose discharged batteries only.
• All batteries are recycled to reclaim valuable material such as
iron, zinc or nickel.
15. Certification
FCC ID: UZCGB -S880
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC Rules
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. owever,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocte the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
Made in Korea
In accordance with the R&TTE Directive 1999/5/EC.
16. Simplified EU Declaration of Conformity
ereby, beyerdynamic declares that the radio equipment type Byron
BTA is in compliance with the R&TTE Directive 1999/5/EC.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.beyerdynamic.com/cod

www.beyerdynamic.com
beyerdynamic GmbH & Co. KG . Theresienstraße 8 . 74072 eilbronn . Germany
Tel. [phone] . Fax [phone] . [email protected]
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.
EN 4 / Byron BTA (09.16)

Byron BTA
BLUETOOTH IN-EAR HEADSET
Bedienungsanleitung

deutsch
Byron BTA – In-Ear Headset 3
Inhalt
1. Sicherheitsanweisungen. . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Funktionen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Zubehör . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Bedienelemente und Anzeigen . . . . . . . . . . . . . . . . . . . . 6
5. Bedienungsanweisungen . . . . . . . . . . . . . . . . . . . . . . . . 7
6. So tragen Sie das In-Ear Headset . . . . . . . . . . . . . . . . . . 8
7. Erklärung der Tasten . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Erste Schritte mit Ihrem Byron BTA. . . . . . . . . . . . . . . . 11
8.1 Verbinden mit Ihrem Mobiltelefon . . . . . . . . . . . . . 11
8.2 Multi-Point-Einstellung . . . . . . . . . . . . . . . . . . . . 12
8.3 Anruf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.4 Wiederherstellen der Werkseinstellungen . . . . . . . . 13
8.5 Abspielen von Musik . . . . . . . . . . . . . . . . . . . . . . 13
9. Was bedeutet die LED-Farbe?. . . . . . . . . . . . . . . . . . . . 13
10. Fehlerbehebung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11. Wartung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12. Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Entsorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
14. Entsorgung des Akkus . . . . . . . . . . . . . . . . . . . . . . . . . 15
15. Zertifizierung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
16. Vereinfachte EU-Konformitätserklärung . . . . . . . . . . . . . 16

Byron BTA – In-Ear Headset
4
Wir danken Ihnen für Ihre Wahl des Byron BTA Stereo Bluetooth
In-Ear Headset von beyerdynamic. Bitte nehmen Sie sich etwas Zeit
und lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie
das Produkt verwenden. Bitte bewahren Sie die Bedienungsanleitung
auf.Wenn Sie das Headset an andere Personen weitergeben, legen
Sie bitte auch die Bedienungsanleitung bei.
1. Sicherheitsanweisungen
Warnung: Achten Sie beim Verbinden des Im-Ohr-Headsets bitte
darauf, dass die minimale Lautstärke eingestellt ist.
Passen Sie die Lautstärke erst an, nachdem Sie das
In-Ear Headset angelegt haben. Zur Vermeidung mög-
licher Schäden an Ihrem ehör, verwenden Sie das In-
Ear Headset nicht für längere Zeit bei hoher Lautstärke.
Als Faustregel gilt, dass Sie die Lautstärke des In-Ear
Headsets beim Tragen so einstellen sollten, dass Sie
immer noch Ihre eigene Stimme hören können,wenn
Sie in normaler Lautstärke sprechen. Wir möchten Sie
darauf hinweisen, dass das Hören bei hoher Lautstärke
über einen längeren Zeitraum Ihr ehör irreparabel
schädigen kann. Stellen Sie sicher, dass die Lautstärke
nicht zu hoch eingestellt ist.
Faustregel: Je höher die Lautstärke, desto kürzer sollte
die Hörzeit sein. Nach den Arbeitgebervorschriften für
Sicherheit und esundheit sollte die Lärmbelastung
nicht mehr als 85 dB (geringe Lautstärke) bei der Ar-
beit betragen, mit einer maximalen Hörzeit von 8 Stun-
den. Wenn die Lautstärke um 3 dB erhöht wird, wird
die zulässige Hörzeithalbiert, d. h. bei 88 dB beträgt
die Hörzeit vier Stunden und bei 91 dB zwei Stunden
usw.
Gefahr!
In-Ear Headsets schränken Ihre Fähigkeit, die Umgebungsgeräusche
wahrzunehmen, erheblich ein. Das Verwenden des In-Ear Headsets
im Straßenverkehr ist potenziell äußert gefährlich und daher
gesetzlich verboten. Achten Sie außerdem darauf, dass Sie Ihr
In-Ear Headset nicht in der Nähe von möglicherweise gefährlichen
Maschinen und Werkzeugen verwenden.
Verletzungsgefahr!
Beim Tragen von drahtgebundenen Im-Ohr-Kopfhörern sollten sie
plötzliche Bewegungen vermeiden. Sie könnten sich ernsthaft
verletzen, insbesondere, wenn Sie Piercings haben, Ohrringe oder
eine Brille usw. tragen, die sich im Kabel verfangen können/kann.
Veränderte Wahrnehmung
Viele Menschen brauchen einige Zeit, sich an In-Ear Kopfhörer zu
gewöhnen. Ihre auditive Wahrnehmung der eigenen Stimme und
Ihres Körpers, und sogar die eräusche im Innenohr während des
ehens, unterscheiden sich von „normalen" Situationen, wenn Sie
kein In-Ear Headset tragen. Dieses seltsame efühl wird in der Regel
nach einer Weile des Tragens des Im-Ohr-Headsets abklingen.