Beyerdynamic MMX 200 wireless User manual

User Manual |Bedienungsanleitung |Mode d’emploi
Inrucciones de use |Manuale d’uso |Bruksanvisning
取扱説明書 |คู่มือการใช้งาน |使用说明书
MMX 200 wireless
GAMING HEADSET

MMX 200 wireless
2
EN
CONTENTS
Safety inructions .......................................................................... 3
Operating elements......................................................................... 4
Connect the microphone ................................................................... 4
Connect the USB cable...................................................................... 5
Connect the jack cable ..................................................................... 5
Charging ................................................................................... 6
Overview light guide display ................................................................ 6
Overview light guide display dongle .........................................................7
Overview microphone LED display ...........................................................7
Set volume ...................................................................................7
Microphone mute on/o .....................................................................7
Augmented Mode...........................................................................8
Low Latency Mode ..........................................................................8
Bluetooth® Mode ............................................................................8
Hybrid Mode ................................................................................8
Operating functions / operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Replacing the ear pads ..................................................................... 9
Maintenance................................................................................10
Firmware update............................................................................10
Service ......................................................................................10
Supplied accessories .......................................................................10
Accessories / replacement pas ............................................................10
Technical specifications ....................................................................10
Disposal.....................................................................................10
Trademarks .................................................................................11
Useful links ..................................................................................11

MMX 200 wireless
3
EN
Congratulations to your Meta Pick!
We hope you will enjoy your MMX 200 wireless headset
from beyerdynamic.
Please take some time to read carefully through
this manual before using the product.
ENJOY THE SOUND!
Your beyerdynamic Team
Risk of injury
�We would like to point out that excessively
high volumes and long liening times may
cause hearing damage. Hearing defects
always conitute an irreversible impairment
of hearing ability. If you suer from tinnitus,
do not use headphones or reduce the
volume.
�When using the headset, please make sure
that the volume is turned down to minimum.
Adju the volume aer putting on the
headset.
Danger to life
�Headphones draically reduce perception
of external sounds. Using headphones in
road traic can be potentially dangerous.
The user’s hearing mu not be impaired to
the extent that it causes road safety risks.
Please also make sure that you do not use
the headphones in traic, especially
within an area of potentially dangerous
machines and tools.
SAFETY INSTRUCTIONS
�Fuhermore, avoid using headphones in situations
where hearing mu not be aected, especially when
crossing a railway crossing or at a conruction site.
Liability / intended use
�Only use the product as described in this product
manual. beyerdynamic accepts no liability for
damage to the product or injury to persons caused
by careless, improper or incorrect use of the
product, or by use for purposes not specified by the
manufacturer.
�beyerdynamic is not liable for damage to USB
devices that do not comply with the USB
specifications.
�beyerdynamic is not liable for damage resulting
from connection interruptions due to batteries being
empty or too old, or due to exceeding the Bluetooth®
transmission range.
�Please also observe the relevant country-specific
regulations before using the product.

MMX 200 wireless
4
EN
CONNECT THE MICROPHONE
�When connecting the microphone, please
observe the position of the jack.
�If the microphone is removed from the headset,
the microphones built into the ear cups
are automatically activated.
aLight guide:
display of dierent ates
bControl wheel: volume,
Augmented Mode,
microphone mute
c/ button: change
between Low Latency (LL)
and Bluetooth® (BT) mode
dMicrophone opening for
Augmented Mode microphone,
le
eUSB po:
for use with digital cable
or charging
fMicrophone connection
for the gooseneck microphone,
4-pole mini jack (3.5 mm)
gOn-o button:
Switch “on” before use.
Switch “o” aer use.
hMicrophone opening for
Augmented Mode microphone,
right
iUSB connector
jLight guide
kFunction button
OPERATING ELEMENTS
Front view
Le
ear cup Right ear cup
a
b
c
d
e
f
g
h
Bottom view
Dongle
Headset
i
j
k

MMX 200 wireless
5
EN
CONNECT THE USB CABLE
�When connecting the provided USB-C to USB-A
cable, the USB-C is connected to the headset,
while the USB-A is connected to the device
(e.g. computer / console).
�For devices with USB-C pos, please use a third pay
USB-A to USB-C adapter or cable.
�Once the headset is connected, it will automatically
inall the driver. This may take a few seconds.
�Please check your syem audio settings and select
the MMX 200 wireless as input and output device, if
it‘s not already selected.
�If you want to use the headset as a USB audio device,
switch it o and connect it via USB. The headset will
a automatically and is ready as a USB device.
�If you want to charge the headset during wireless
operation, connect it to the PC. This does not aect
the wireless connection, but the headset is not
available as a USB audio device.
Connect to device
Connect to
headset
CONNECT THE JACK CABLE
�Connect the USB-C connector to your headset and
the jack plug to your device. The output signal should
now be played back by the MMX 200 wireless, as well
as input signals that will be picked up by the micro-
phone.
�Please switch on the headset! Only aer switching
on, the headset is also active in analogue mode.
�When connecting to a computer, please also
check your syem audio settings and select your
computer‘s sound card as input and output device.
�Caution: Connect the jack plug of the cable
to a headphone socket only! If you connect the
headset to any other jack socket, the headset
could be damaged.
Connect to device
Connect to
headset

MMX 200 wireless
6
EN
CHARGING
�Connect the USB-C connector of the USB cable to
the USB-C po on the MMX 200 wireless. Connect the
USB-A connector to your device (e.g. power supply
unit or computer etc.)
�During charging, the light guide pulses green.
�When the battery is low, the light guide flashes red.
�The MMX 200 wireless is supplied with a charge of
approx. 60%. Please fully charge before use.
�In order to protect the battery,
we recommend, that you do not
charge the product continuously
for more than 30 hours.
Pull the connector carefully
to disconnect when
charging is finished or if
another cable is to be
used.
Press the USB-C connector
firmly into the headset.
OVERVIEW LIGHT GUIDE DISPLAY
Function Light guide display
Headset tries to connect to receiver/device Flashing red/blue
Headset connected to Bluetooth® device when
dongle is connected (Augmented Mode is o)
Slowly flashing orange
Headset is connected to Bluetooth® device Slowly flashing blue
Incoming call Flashing red/green
Augmented mode is activated Slowly flashing turquoise
Microphone is muted Illuminates red
Headset is being charged Battery full = illuminates green
Battery > 30% = slowly flashing yellow
Battery < 30% = slowly flashing red
Error = rapidly flashing red
Soware update is being carried out Flashing magenta
Headset is switched o Illuminates orange
Bluetooth® pairing/discovering Alternately flashing blue/red
Bluetooth® connection lo Rapidly flashing blue
Bluetooth® connection lo when dongle is connected Rapidly flashing orange
LC3 audio playback Slowly flashing orange
A2DP audio playback Slowly flashing blue
Microphone not muted during call Slowly flashing green

MMX 200 wireless
7
EN
Function Light guide display
Dongle connected to USB po (not paired) Illuminates white
Headset is connected to dongle Illuminates orange
Headset is switched o while being connected
to the dongle
Light guide is o
OVERVIEW LIGHT GUIDE DISPLAY DONGLE
Function Microphone display
Microphone is muted LED illuminates red
Battery is almo empty LED is rapidly flashing red
OVERVIEW MICROPHONE LED DISPLAY
SET VOLUME
�To increase the volume, simply turn the control
wheel upwards.
�To decrease the volume, turn the control
wheel downwards. Increase
volume
Decrease
volume
MICROPHONE MUTE ON/OFF
�Press the control wheel briefly to mute the
microphone.
�A red light on the microphone as well as around the
control wheel illuminate.
�Briefly press the control wheel again to unmute the
microphone. The red light goes out. Press
briefly

MMX 200 wireless
8
EN
AUGMENTED MODE
�Using the Augmented Mode, your headset works
as if it were open, i.e. you can hear your voice more
natural and you can hear your surroundings such
as people talking to you or the doorbell.
�Press and hold the control wheel (2 seconds).
�The Augmented Mode is enabled when you hear the
voice prompt. The light guide around the
control wheel will illuminate turquoise.
�To disable the Augmented Mode, press and hold
the control wheel again for 2 seconds. The turquoise
light will go o.
LOW LATENCY MODE
By default, the MMX 200 wireless is supplied in Low
Latency Mode.
This mode is suitable for gaming on devices with USB
connection (PC, PlayStation®, Nintendo Switch™).
�Connect the dongle to the USB connection of the
device (PC, PlayStation® Nintendo Switch™).
�When the headset is in Bluetooth® Mode:
Press the / button twice briefly to switch to the
Low Latency Mode.
�If the supplied dongle is lo and a new dongle is to
be used, it mu be paired with the headset.
You can find more information at:
suppo.beyerdynamic.com
HYBRID MODE
For Hybrid Mode: Whil the headset is in Bluetooth®
Mode, it is connected via a mini jack (3.5 mm) to an
analogue headphone output (e.g. controller) with the
optional analogue cable. The audio signals from
Bluetooth® and the analogue device are mixed 50/50.
�Whil the headset is in Bluetooth® Mode, connect
the headset to the headphone output (e.g. controller)
with the analogue cable.
�If the cable is disconnected from the device, the
headset switches to the Bluetooth® Mode or
connects to the dongle, if no Bluetooth® connection
has been active before.
�When Bluetooth® is disconnected, the headset
operates in the analogue mode.
�Please control the volume of the Bluetooth® and
analogue source (e.g. game console) directly on the
analogue or Bluetooth® device.
BLUETOOTH® MODE
Before the headset can be used in Bluetooth® Mode,
it mu be paired with a mobile phone or another
Bluetooth®-enabled device.
The pairing prodcedure can dier between various
devices.
�Please refer to the operating inructions of the
device with which the headset is to be paired.
�When the headset is in Low Latency Mode:
Press the / button three times in rapid
succession to switch to Bluetooth® Mode.
�Select MMX 200 wireless in the pairing li on the
mobile phone or other Bluetooth®-enabled device.
�Once the headset is connected, audio and tele-
phone functions are available via the / button.
Please refer also to the “Operating functions/
operation” table.
Press
2 sec.

MMX 200 wireless
9
EN
OPERATING FUNCTIONS / OPERATION
Operating functions Operation
Switch on �Press and hold the on-o button for 3 sec.
Switch o �Press and hold the on-o button for 3 sec.
Microphone mute on/o �Briefly press the control wheel
Augmented Mode enable/disable �Press the control wheel for approx. 2 sec.
Enable Bluetooth® Mode �Briefly press the / button 3 x
Enable Low Latency Mode (Dongle connected) �Briefly press the / button 2 x
Pair a new device via Bluetooth® �Press and hold the / button for 3 sec.
Set volume �Increase volume: turn the control wheel upwards
�Decrease volume: turn the control wheel downwards
Accept / end a call (Bluetooth® Mode) �Briefly press the / button 1 x
Reject an incoming call (Bluetooth® Mode) �Press and hold the / button for 2 sec.
Play / op music (Bluetooth® Mode) �Briefly press the / button 1 x
Delete pairing li �Switch o the headset, then press and hold the on-o
button for 6 sec.
Reset to factory settings �Switch o the headset, then press and hold the on-o
button for 16 sec.
REPLACING THE EAR PADS
�To remove the ear pad, gently turn it counter-
clockwise and pull it o.
�To attach the new ear pad, place it onto the
orange housing and gently turn it clockwise
until it sits tight.
Turn counter-clockwise
and pull o.
Replace ear pad
and turn clockwise.

MMX 200 wireless
10
EN
MAINTENANCE
�Use a so cloth moiened with water to clean
the suace.
�Make sure that no water enters the headset.
�Do not use cleaning agents containing solvents.
�Never use a vacuum cleaner for cleaning the
headset, as this may cause irreparable damage.
FIRMWARE UPDATE
�Firmware updates keep the MMX 200 wireless
up to date with the late technology.
�Connect the MMX 200 wireless to a computer
via the USB cable.
�You can find the late firmware for your
MMX 200 wireless at:
www.beyerdynamic.com/mmx-200-wireless
�Fir download the beyerdynamic Update Hub
from the “Downloads” section and inall it on
your computer.
�Then a the firmware update and follow the
inructions on the screen.
�Please make sure that you always keep the
firmware up to date.
SERVICE
�If you require service, please contact qualified
service personnel or directly:
beyerdynamic Service and Logiics Centre
E-mail: [e-mail]
�Dismantling the headset yourself will invalidate the
guarantee.
SUPPLIED ACCESSORIES
�1 x USB-C to USB-A cable, 2.4 m (7.9 ),
to connect the headset to a computer/console
�1 x Microphone pop shield
�1 x Dongle (Low Latency Wireless Adapter)
ACCESSORIES / REPLACEMENT PARTS
�1 x USB-C to 4-pole jack cable (CTIA), 1.2 m (3.9 ) ,
to connect the headset to analogue/poable
devices
�More accessories and replacement equipment
can be found at: www.beyerdynamic.com
�If you have technical queions while using the
headset or need fuher guidance, please visit our
FAQ website at: suppo.beyerdynamic.com
TECHNICAL SPECIFICATIONS
Transducer .....................................Dynamic
Operating principle ..............................Closed
Frequency response.................... 20 Hz - 20,000 Hz
Transmission ...............Low Latency (LC3), Bluetooth,
Bluetooth + Analogue Connection, USB Audio
Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . 5.3, A2DP, HFP, SBC, LC3
USB ...............................................USB-C
Analogue connection ................................Yes
USB audio connections ..............................Yes
Charging during use .................................Yes
Battery life ......35 hours (microphone and loudspeaker
at a ceain playback volume)
Additional functions.......................Call handling,
mute microphone,
volume control,
Augmented Mode
Weight (without cable) .............................360 g
Microphone
Type................................Condenser (electret)
Polar pattern................................... Cardioid
Frequency response........................50 - 18,000 Hz
Capsule diameter .................................10 mm
Open circuit voltage .....................-26 dBV @ 1 kHz
Dongle
Codec................................................LC3
Connector ........................................USB-C
LED .......................................multi-coloured
DISPOSAL
�This symbol on the product, in the operating
inructions or on the packaging means that
the electrical and electronic devices mu be
disposed of separately from household wae
at the end of their life-cycle.
�Always dispose of used equipment in accordance
with applicable regulations.
�Dealers for electronic equipment are generally
obliged to take back wae electrical/electronic
equipment free of charge. This obligation also
applies to sales via remote communication.
�For fuher information, please contact the local
authorities or the dealer from whom the product was
purchased.

MMX 200 wireless
11
EN
TRADEMARKS
The Bluetooth® word mark and logos are regiered
trademarks of Bluetooth SIG, Inc. and all use of these
trademarks by beyerdynamic is under licence. Other
trademarks and trade names are the propey of the
respective owners.
USB Type A, USB Type B and USB Type C are trademarks
of USB Implementers.
THIRD PARTY LICENSES
For more information on 3rd pay licenses, please go to:
https://www.beyerdynamic.com/media/downloads/he-
adphones/manual/Licenses_MMX_200_wireless.md
REPLACE BATTERY
The battery can be replaced by qualified personnel.
Please contact the service depament at beyerdynamic,
your speciali dealer or a licensed dealer in your
region.
USEFUL LINKS
www.beyerdynamic.com
Firmware update:
www.beyerdynamic.com/mmx-200-wireless