Bischoff & Bischoff Triton User manual

Enjoy mobility.
Bischoff & Bischoff
Instru tion manual
riton

2
Contents:
1| Preface 4
1.1. Signs and symbols
2| mportant safety instructions 6
2.1. General safety instructions
2.2. Brakes
2.3. Anti-tilt wheels
2.4. Tyres
2.5. Obstacles
2.6. Ascents and descents
2.7. Safety in vehicles
2.8. Using public footpaths and roads
2.9. Purpose
2.10. ndications
2.11. Contraindications
2.12. Responsibility
2.13. Declaration of Conformity
3| Overview of product and accessories 11
3.1. Checking the delivery
3.2. Package
4| Using the wheelchair 13
4.1. Setting up the wheelchair
4.2. Transporting the wheelchair
4.3. Entering and leaving from the side
4.4. Entering and leaving from the front
4.5. Negotiating steps or high kerbs
4.6. Foot plates
4.7. Leg rests
4.8. Side sections and arm rests

Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 3
4.9. Seat width
4.10. Seat depth
4.11. Seat back height
4.12. Seat angle
4.13. Seat back angle
4.14 Parking brake
4.15. Handle
4.16. Side shoulder pads
4.17. Drum brake (optional)
4.18. Anti-tilt wheels
4.19. Tilting aid
4.20. Head rest
4.21. Therapy table
4.22. Lap belt
5| Technical Data 25
6| User care instructions 26
6.1. Cleaning
6.2. nspection of the wheelchair by the user
7| Repair and maintenance instructions 28
8| Disposal 29
9| Transferring the wheelchair 29
10| Maintenance 29
11| Warranty 30
12| Warranty — certificate 31
English

4
1. Preface
Dear user,
You have selected a high-quality wheelchair from Bischoff
& Bischoff. Thank you for your trust in our products.
The wheelchair has been designed to give you many
advantages and to meet your needs. The wide range of
adjustments for seat depth, seat back height, knee angle,
seat width, seat-back angle, seat angle and lower-leg
length make it easy to adjust the Triton to the user's indi-
vidual body size.
The Triton is designed for use inside and outside.
Please read and follow the instruction manual carefully
before using your new wheelchair for the first time. The
manual is an integral and important component of the
wheelchair. Keep the instruction manual at hand and
include with the wheelchair when you transfer it to another
owner.
Repairs and adjustments require specialised technical
training and must be carried out by Bischoff & Bischoff
authorised dealers only.

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 5
1.1. Signs and symbols
You have selected a high-quality wheelchair from Bischoff
& Bischoff. Thank you for your trust in our products.
Caution! ndicates specially safety-relevant
instructions. Follow instruction manual.
mportant! ndicates particularly useful
information in the specific context.

6
Before using the wheelchair check that all attached com-
ponents are correctly fastened. Practise using your new
wheelchair on a small, flat area first to prevent falls and
hazardous situations.
We recommend having an assistant with you at this time.
The wheelchair must not be used to transport more than
one person or loads.
Note the intended use. Never operate the wheelchair
under the influence of alcohol or other substances that
could detract from your alertness or physical and intellec-
tual acuity.
Please note that changes in the balance of the wheelchair
by body movements or the load may increase the risk of
tipping. Please note that padding that is exposed to direct
sunlight may become hot and burn your skin if it comes
into contact with it. Cover these parts or protect the
wheelchair from direct sunlight.
We recommend using leather gloves when using the
wheelchair outdoors. This improves the grip and protects
your hands and fingers from dirt and injury.
2. Important safety
instructions
2.1. General safety
instructions

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 7
Parking brake
The brakes that actuate directly on the tyres of the wheels
are to be used as parking brakes only, i.e. they must only
be actuated when the wheelchair is at a standstill and
must never be used to reduce the speed of the wheelchair.
When using the hand rims for slowing down from speed or
descending long slopes, your fingers and hands will quickly
become hot. Be careful of burns!
Drum brake (optional)
The drum brake is designed exclusively for operation by an
assistant pushing the wheelchair. The drum brake can be
used as a parking brake and also for slowing down the
wheelchair gently.
2.2. Brakes
2.3. Anti-tilt wheels
The anti-tilt wheels prevent the wheelchair from tipping
backwards. Please note that for using the wheelchair the
anti-tilt wheels are of only limited use on rough areas,
hoists and ramps. Make sure that the clearance to the
sides, above and below is sufficient.
2.4. yres
Make sure that the tyres have sufficient tread (>1 mm) at
all times. f the tread is too worn down, safe use of the
wheelchair cannot be guaranteed.werden.

8
Always use ramps to negotiate obstacles (e.g. kerbs, steps
etc.). Do not travel into an obstacle (step) without braking
or jump down from steps.
2.5. Obstacles
2.6. Ascents and des-
cents
Please note that if the seat back is adjusted to an extreme
tilt, your wheelchair may tip backwards on even a moderate
slope. Negotiate inclines and slopes only with an assistant
with these adjustments. Use the anti-tilt wheels to help
prevent the wheelchair from tipping backwards.
2.7. Safety in vehicles
Please note that wheelchairs must not be used as seating
in any vehicles. The user must transfer from the
wheelchair to a standard vehicle seat.
2.8. Using public
footpaths and roads
The wheelchair is designed for use indoors and outdoors.
Always follow the traffic regulations on public streets.
English

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 9
2.9. Purpose
The wheelchair is designed exclusively to improve mobility
and to transport handicapped persons for whom its use is
indicated based on one of the specified indications. The
maximum load capacity is 125 kg.
2.10. Indications
Walking disability or serious difficulty in walking as a
result of
• paralysis
• loss of limb
• defect or deformity in limbs
• joint contractures or joint damage (not on both arms)
• other conditions
The use of a back rest adjustment greater than 30° and
foot rests that can be lifted to a horizontal position is
indicated if a near-horizontal position is required intermit-
tently, e.g. because of orthostatic collapse conditions.
2.11. Contraindications
The wheelchair is unsuitable for use with
• sensory disorders
• severe equilibrium disorders
• loss of limb on both arms
• joint contractures or joint damage on both arms
• inability to sit
• reduced or inadequate vision

10
2.12. Responsibility
We can only accept a warranty claim if the product is used
under the specified conditions and for the specified purposes,
if modifications, extensions, repairs and maintenance
work are carried only by persons authorised by us and if
the wheelchair is used in accordance with all instructions
for use.
2.13. Declaration of
Conformity
Bischoff & Bischoff as manufacturer declare in sole
responsibility that the Triton wheelchair complies with the
requirements of Directive 93/42/EEC.

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 11
3. Overview of product
and accessories
3.1. Checking the delivery
The Triton wheelchair is supplied fully assembled in a carton.
After unpacking the wheelchair, keep the carton if at all
possible. t can be used for subsequent storage or return
of the wheelchair.
The wheelchair is supplied and adjusted by a qualified
and authorised dealer in medical products, which also
provides instruction in its use.
f the wheelchair is delivered by rail or road transport it
must be inspected for shipping damage in the presence of
the delivery person. f any damage is detected, contact
our customer service department immediately
(Tel.: + 49 (0)700/6000 7070).
Check the contents of the package for completeness and
damage. f irregularities and damage are found please
contact our customer service department immediately
(Tel.: + 49 (0)700/6000 7070).

12
3.2. Package
The package contains the following main components:
• wheelchair, preassembled
• 1 pair of leg rests (adjustable angle)
• 1 head rest
• 1 pair of side sections with arm rests
• 1 pair of shoulder pads
• 1 pair of lower leg and nee pads
• 1 tool kit
Head rest
Side pad
Side section
Leg rest
Knee cushion
Lower leg cushion
Ankle strap
Foot plates
Swivelling wheel
Fig. 1

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 13
After unpacking the wheelchair it must be made ready
for use.
• Lift the seat back to the upright position.
• Lock the seat back to the gas cylinder for adjusting
the seat back angle.
• Attach the drive wheels with the stub axle.
• The parking brakes on the right and left drive wheels.
• Position the seat and seat back cushions.
• Attach the leg rests and fold the foot plates up.
• Now you can sit down.
Fig. 2
4. Using the wheelchair
4.1. Setting up the
wheelchair
Fig. 3

14
4.2. ransporting the
wheelchair
To prepare the wheelchair for transport in a car proceed as
follows.
• Remove the leg rests.
• Release the seat back attachment to the gas cylinder.
• Fold the seat back forward.
• Release the parking brakes on the right and left drive
wheels.
• Now the wheels can be easily removed from the stub
axles.
DO NOT JAM F NGERS!
Make sure that you do not jam your fingers
when folding the seat back down.
Fig. 4
Fig. 5

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 15
4.3. Entering and leaving
from the side
• Move the wheelchair as close as possible to the present
or future seat side by side.
• f you wish to move from another wheelchair or room
chair, lock it by setting the parking brakes.
• Lock the Triton to prevent it from moving accidentally
by setting the brake levers on the right and left sides.
• Remove the side section with the arm cushion.
• Fold the foot plates to the side or remove the leg rests
completely.
• Now slide sideways onto the other seat.
• Make sure that you are sitting as far back in the seat as
possible.
• Then move the arm rest and leg rests to the original
position.

16
4.4. Entering and leaving
from the front
• First fold the foot plates up or remove the leg rests
completely.
• Move the Triton as close as possible to the present or
future seat until they are front to front.
• f you wish to move from another wheelchair or room
chair, lock it by setting the parking brakes.
• Now slide onto the seat by turning your body around.
• Then move the arm rest and leg rests to the original
position.
Never stand on the foot plates.
danger of tipping!
4.5. Negotiating steps
or high kerbs
• The assistant must hold fixed frame parts only
(Fig. 8 and 9).
• When negotiating a step the assistant at the back pulls
the wheelchair over it by pulling the fixed handles.
• The bottom assistant holds the front frame tube and
stabilises the wheelchair. The back wheels of the
wheelchair are pushed down onto the steps.
Two assistants are required for high steps or
staircases with more than three steps.
Fig. 6
Fig. 7

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 17
• When going down the bottom assistant brakes the
wheelchair by pressing it down onto the steps. The top
assistant holds the wheelchair by the handles to secure
it and keep it in the correct position. The wheelchair
should roll down the steps one by one.
When transporting the wheelchair hold it by
the frame and the handles only. Never use the
arm rests to lift the wheelchair.
4.6. Foot plates
• The lower leg length can be adjusted over a range of
five positions by 22.5 cm each.
• Loosen the plastic screw.
• Set the required height.
• Tighten the plastic screw again.
• Fold the foot plates to the side for entering and leaving
the wheelchair.
• The angle of the foot plate can be adjusted along the
teeth by loosening the Allen screw (5 mm).
Caution! the marking makes it easier to position
the fastening hole.
Fig. 8
Fig. 9

18
Fig. 10
4.7. Leg rests
To make it as easy as possible to enter and leave your
wheelchair, the foot plates can be folded up or the leg
rests can be swung to the side out of the way or removed.
• Open the lock to swing the leg rest to the side.
• The leg rest in the swung-out position can be
completely removed.
• To replace the leg rest, proceed in reverse order.
• Move the leg rest to the forward position until you hear
it lock into place.
• The leg rests can be independently adjusted up to a
horizontal position.
• Move the leg rest to the desired position.
• The leg rest automatically remains in the selected position.
• Use the lever to lower the leg rest again (Fig. 12).
• The lower leg pad can be moved up and down the leg rest.
• Loosen the screws (4 mm) and position the lower leg
pads at the desired height.
• Tighten the screws again.
Fig. 12
Fig. 11
Fig. 13

English
Triton
Bis hoff & Bis hoff GmbH • 03.01.2012 19
4.8. Side sections
and arm rests
Fig. 14
• The height of the side sections with the arm rests is
adjustable.
• Push the locking button and adjust the desired height.
• The side sections can be removed entirely for ease of
entering and leaving the wheelchair.
• The arm rest can also be adjusted horizontally.
• Unscrew the plastic screw under the arm rest.
• Move the arm rest to the desired position and tighten
the screw again.
Do not use the side sections to lift the
wheelchair.
Fig. 15
Fig. 16
4.9. Seat width
• The seat width in both versions can be adjusted over a
range of 12 cm to fit the requirements of the user.
• t must be adjusted evenly on the right and left.
• The leg rests and side sections must be moved to adjust
the seat width.
• Tip the wheelchair onto the handles.
• Loosen the Allen screws (6 mm).
• Set the desired seat width and then tighten the
Allen screws.

20
Fig. 17
• The seat depth in both versions can be adjusted over a
range of 12 cm.
• Remove the seat cushion.
• Loosen the Allen screws (6 mm) underneath on the
frame.
• Set the desired seat depth and then tighten the
Allen screws.
• Replace the seat cushion.
Fig. 19
4.10. Seat depth
4.11. Seat back height
Position the hook and loop belt one on top
of the other.
• The seat back height in both versions can be adjusted
over a range of 16 cm.
• Remove the seat back cushion.
• Loosen the plastic screws on the back.
• Set the desired seat back height and then tighten the
plastic screws.
• Replace the seat back cushion.
Fig. 18