Blaupunkt IVSC 1102 User manual

In Car Video
IVSC-1102
Operating and installation instructions
http://www.blaupunkt.com

6
CONTENTS
General information ................. 7
Installation and safety notices .......... 7
Accessories .................................... 7
Function .......................................... 7
Supplied parts .......................... 8
Installation................................ 8
Installation and safety notices .......... 8
Positive connection ......................... 8
Switching positive ........................... 9
Negative (ground) connection .......... 9
Specifications .......................... 9
Features .......................................... 9
Connection diagrams ............. 38

DANSK
7
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
General information
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instruc-
tionsbefore usingthe equipmentfor
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questionsonhowtooperatethedevice,
please contact your dealer or the tele-
phone hotline for your country. You will
findthetelephonenumberprintedatthe
back of this booklet.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
anteeconditionsatwww.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Installation and safety notices
Before connecting your signal control-
ler, please read the following informa-
tion carefully.
Thebattery’snegative terminalmust
be disconnected for the entire time
ittakesto installandconnectthisde-
vice.
When doing so, observe the vehicle
manufacturer’ssafetynotices(airbags,
alarm systems, trip computers, immo-
bilizers).
Beforedrillinganyholes,makesurethat
no installed cables or vehicle compo-
nents can be damaged.
When installing the signal controller,
select a location in the vehicle that al-
lows you to attach it firmly into place
using screws. The installation location
should be such that the signal control-
ler does not get in the way of the driver
and cannot endanger the occupants in
the event of the vehicle suddenly com-
ing to a halt, for instance, during an
emergency stop.
Accessories
We recommend you use accessories
thathavebeenapprovedbyBlaupunkt.
Function
TheIVSC-1102signalcontrollermakes
it possible for you to connect analogue
video sources like the IVDP-01, IVTV-
01, etc. to Blaupunkt navigation com-
ponents such asTravelPilot DX-N, DX-
V and similar devices.
Certain settings must be configured in
the navigation component’s menu be-
fore a video source image can be dis-
played on the navigation monitor.
You will find information on the neces-
sary settings in the operating instruc-
tions for those components
.
GENERAL INFORMATION

8
Supplied parts
The signal controller is supplied with all
thepartslistedbelow.Pleasecheckthat
the range of parts supplied with your
device is complete. If one of the listed
parts is missing, please contact your
dealer immediately.
●Signal controller 7 607 003 553
●Connecting cable
●Screws
●Operating and installation instruc-
tions
Installation
Installation and safety notices
Before connecting your signal control-
ler, please read the following informa-
tion carefully.
Thebattery’snegative terminalmust
be disconnected for the entire time
ittakesto installandconnectthisde-
vice.
When doing so, observe the vehicle
manufacturer’ssafetynotices(airbags,
alarm systems, trip computers, immo-
bilizers).
Beforedrillinganyholes,makesurethat
no installed cables or vehicle compo-
nents can be damaged.
When installing the signal controller,
select a location in the vehicle that al-
lows you to attach it firmly into place
using screws. The installation location
should be such that the signal control-
ler does not get in the way of the driver
and cannot endanger the occupants in
the event of the vehicle suddenly com-
ing to a halt, for instance, during an
emergency stop.
Note:
Before connecting the monitors to
yoursignal controller,checkthat the
+/- and switching positive connec-
tions are working properly.
Positive connection
Connect the fuse holder (1A fuse) to
protect the positive cable (permanent
(1), see Fig. 1). The fuse holder should
SUPPLIED PARTS INSTALLATION

DANSK
9
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
SPECIFICATIONS
beconnectedtothepositiveterminalat
adistanceofmax.30cmfromthevehi-
cle battery (if necessary, drill a hole in
the bulkhead and use the appropriate
cable grommets).
Switching positive
Connecttheswitchingpositivecable(2)
(see Fig. 1) to the switching positive
output (ignition ) of the main de-
vice(e.g.carradioornavigationdevice).
If connecting to terminal 15 of the vehi-
cle, protect the switching positive cable
(2) by installing a fuse holder (1A fuse)
at a maximum distance of 20 cmfrom
the point of connection.
Negative (ground) connection
Attach the negative cable (1) (earth/
GND, (3), see Fig. 1) directly to the ve-
hicle body using a screw. Scratch the
surface down to the bare metal at the
pointatwhichtheearthcontactismade
andapplygraphitegrease(importantfor
a good earth connection).
•Iftheinstallationrequiresholestobe
drilled or any other changes to be
made to the vehicle, please contact
a specialist workshop in your area.
Note:
You cannot display PAL video on the
wide vision TV monitor using the RGB
input.
In this case, the PAL video signal must
be connected directly to theAV input of
the wide vision TV monitor.
Specifications
Video input:
Composite Video, 1.0 Vpp, 75 Ohm
RGB output (video signal, internal
resistance 75 ohm):
Typical 0.7 Vpp
RGB output (composite sync, inter-
nal resistance 75 ohm):
Typical 1.0 Vpp
Power supply:
DC12V, +/- 10%, max. 1A
Features
1 Video input:
Cinch jack
1 RGB output:
15-pin Sub-D plug-type connector
Conversion:
CCVS (NTSC/PAL) in RGB 50/60 Hz
Power input:
4-pin plug-type connector
Metal housing
INSTALLATION

38
12V
Fig. 2
Fig. 1
Anschlussbilder • Connection diagrams • Schéma
électrique • Schemi di allacciamento • Aansluittekeningen •
Anslutningsbilder • Esquemas de conexión • Esquemas de
ligação • Tilslutningsskemaer
RGB OUT VIDEO IN
DC 12V IN
IVSC - 1102
ON
IR
TravelPilot DX... Signal Controller
7 607 001 601 / 1,5 m
7 607 001 602 / 4 m
Video IN
IVDP-01
IVTV-01
Video in
RGB out
+12V Ignition
RGB OUT DC 12V IN Video IN
Masse/GND
+12V Permanent (Batterie,
battery)
(1)
(3)
(2)

07/03 CM/PSS - 8 622 403 776
Blaupunkt GmbH
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de
serviço / Servicenumre
Country: Phone: Fax: WWW:
Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com
Austria (A) 01-610 390 01-610 393 91
Belgium (B) 02-525 5454 02-525 5263
Denmark (DK) 44 898 360 44-898 644
Finland (FIN) 09-435 991 09-435 99236
France (F) 01-4010 7007 01-4010 7320
Great Britain (GB) 01-89583 8880 01-89583 8394
Greece (GR) 210 57 85 350 210 57 69 473
Ireland (IRL) 01-4149400 01-4598830
Italy (I) 02-369 6331 02-369 6464
Luxembourg (L) 40 4078 40 2085
Netherlands (NL) 023-565 6348 023-565 6331
Norway (N) 66-817 000 66-817 157
Portugal (P) 01-2185 00144 01-2185 11111
Spain (E) 902-120234 916-467952
Sweden (S) 08-7501500 08-7501810
Switzerland (CH) 01-8471644 01-8471650
Czech. Rep. (CZ) 02-6130 0441 02-6130 0514
Hungary (H) 01-333 9575 01-324 8756
Poland (PL) 0800-118922 022-8771260
Turkey (TR) 0212-3350677 0212-3460040
USA (USA) 800-2662528 708-6817188
Brasil
(Mercosur) (BR) [phone] [phone]
Malaysia
(Asia Pacific) (MAL) [phone] [phone]