Target 5948307T User manual

B345948307T01
>> assembly instructions
Mixed Material
night stand
style # 5948307T
DPCI # 249-05-0492
TM

Congratulations on your latest Target purchase.
Now what? Don't start sweating over the box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your
room in no time. Good luck--- though we're confident you won't need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order
missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly. Please do not use power tools.
tools needed
2

3
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number
ready when calling.
2
4
5
6
7-22

4
hardware
(1) x8
cam lock
#A22570
(2) x8
cam bolt
#A22510
(3) x10
wood dowel
#A21660
(4) x4
#8x1-34" flat head screw
#A13410
(5) x21
nail
#A21110
(6) x16
#8x716" pan head screw
#A12120
(7) x4
#6x1-14" flat head screw
#A11600
(8) x10
#6x 716" flat head screw
#A11080
(9) x2
8-32x78" bolt
#A17400
(10) x2
drawer bracket
#A54223
(11) x1
handle
#A50415
(12) x1
slide set
#A56750
(13) x2
metal leg
#A95480
12a
12b
12c
12d

5
Parts List DESCRIPTION
PART NUMBER
QTY
ITEM LEFT PANEL
35948307010
1A RIGHT PANEL35948307020
1B TOP35948307031
1
CBOTTOM35948307040
1D STRINGER35948307050
1E REAR BRACE35948307060
1F REAR UPRIGHT35948307070
1
GDRAWER FRONT
35948307080
1H LEFT DRAWER SIDE35948331090
1I RIGHT DRAWER SIDE
35948331100
1J DRAWER BACK35948331110
1K DRAWER BOTTOM
35948331120
1 UPPER BACK PANELK594830710
1 LOWER BACK PANEL
K594830720
1
Parts shown are the base cabinet of your model. Please note, most parts are
labeled with a sticker or have a letter stamped on a raw edge.
Part F may not be labeled.
C
B
A
D
E
G
F
H
These pieces are paperboard construction. It is not made from wood
but is required for the assembly of your unit.
upper
back panel
lower
back
panel
drawerback
drawerbottom
right
drawer side
left
drawer side
I
J
K

6
how to use the cam lock system
2
3
½ turn to fully
lock.
4
Tighten to fully seat. Do not over
tighten. Proper orientation of cam.
1
Lock
Titus
Titus
Titus

1
step
Proper orientation of CAM LOCK
(2) x2
cam bolt
(1) x2
cam lock (8) x3
#6x716" screw (12) x1
left cabinet slide
A
1
1
2
2
8
8
8
3
(3) x1
wood dowel
7
12a
12a
marked with an "L"
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 6 for instructions on how to use the cam lock system.

2
step
Proper orientation of CAM LOCK
(1) x2
cam lock (2) x2
cam bolt (8) x3
#6x716" screw (12) x1
right cabinet slide
1
1
2
2
8
8
8
3
B
(3) x1
wood dowel
8
12b
12b
marked with an "R"
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 6 for instructions on how to use the cam lock system.

3
step
(2) x4
cam bolt
2
2
2
2
C
9
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 6 for instructions on how to use the cam lock system.

4
step
(1) x4
cam lock (3) x8
wood dowel
Proper orientation of CAM LOCK
E
F
G
3
3
3
3
3
3
3
3
1
1
1
1
10
1. Refer to page 6 for instructions on how to use the cam lock system.

5
step
UNLOCK LOCK
A
B
E
F
G
11
1. In this step, make sure the Rear Upright (G) finished edge is up.
2. The finished surface of Rear Brace (F) is up.
3. Refer to page 6 for instructions on how to use the cam lock system.
finished edge
raw surface
x4
raw surface

6
step
(4) x4
#8x1-34" flat head screw
A
B
E
D
4
4
4
4
12
1. In this step, position the Bottom (D) so
that the back edge is flush with back edge
of Left Panel (A) / Right Panel (B).

7
step
A
B
D
C
UNLOCK LOCK
13
x4
1. Refer to page 6 for instructions on how to use the cam lock system.

8
step
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
(5) x21
nail
5
14
Finished
Side
IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Attach the back panel so that the bottom
edge is even with the bottom (D) and
aligned side to side.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
D
Turn the unit onto its front
upper
backpanel
lower
backpanel

9
step
(6) x12
#8x716" pan head screw
6
6
6D
13
13
(13) x2
metal leg
13
15

10
step
(10) x2
drawer bracket
Bracket Orientation Bracket Orientation
1. Lay the drawer sides down on a flat hard surface. Carefully line up the drawer bracket with the holes in the drawer
side as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the
drawer bracket is fully seated on the drawer side.
16
10 10
IJ

11
step
(6) x4
#8x716" pan head screw
6
6
6
6
H
H
17
line up all grooves during assembly
I
J

12
step
H
1. Slide drawer bottom into grooves in drawer sides.
Make sure finished surface is facing up.
18
finished surface
drawerbottom

13
step
(7) x4
#6x1-14" flat head screw H
7
7
7
7
19
K