BROSA NORA CHAIR User manual

NORA CHAIR V1.0
ASSEMBLY GUIDE

ASSEMBLY INSTRUCTIONS
4
STEP 1
Take o fabric cover (attached by velcro)
on underside of chair seat, to reveal the
chair legs and bag of hardware washers
and L shape Allen key.

5
Spring
Washer
x 8
Round
Washer
x 8
Allen
key
x 1
Metal read
Screw
x 8
STEP 2
STEP 3
the
order
123
For each metal thread, there is a small spring washer and round washer
Insert the four legs. Tighten the screw
threads for each of the legs. However, do
not fully-tighten with the Allen Key until
after the chairs are levelled

NORA CHAIR
3

6
STEP 4
Once the screws are all the way in, turn the chair upside down
with the feet on the ground. Find a level surface on which to
level the chair - such as level tiled oor, concrete oor or
other hard oor.
Apply downward pressure and wriggle the chair to settle the
legs into the sockets and level with oor. Do this until all the
legs are siting perfectly level and ush to the oor .
After levelling, you can then go back and tighten the screws.