BDI TERRACE 1156 END TABLE User manual

1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Terrace End Table is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth and clean
glass with glass cleaner.
Terrace is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, contact BDI Customer Service at:
[email protected].
For all other concerns, please contact your BDI retailer.
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Terrace & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 11.16.2016 V1
T2 Hex Wrench x 1
A1 Wood Panel x 1
H1 1/4-20 x 19 mm
Machine Screw x 16
A2 Leg x 4
C1 Glass Top x 1
bdiusa.com
customerservic[email protected]om
TERRACETM 1156
END TABLE

bdiusa.com
customerservic[email protected]om
TERRACE 1156
END TABLE
2
Step 2 - Attach Legs
With one hand, carefully position the wood panel A1 on edge. With other hand, slide 1 leg A2 into a notch on
the bottom of wood panel A1 aligning the attachment plate with the corresponding recessed area. Attach the
leg with 4 screws H1 using hex wrench T2. Attach the other 3 legs.
A1
H1 x 4
T2
H1 x 4
A2
A2

bdiusa.com
customerservic[email protected]om
TERRACE 1156
END TABLE
3
Step 3 Adjust Levelers / Place the Glass Top
With help from another person, place your Terrace Console on its feet. Position your table and check to make
sure it is level. Your Terrace Console Table comes with adjustable levelers under each foot. If necessary, dial
out one or more of the levelers to stabilize the table. Place the glass top onto the top of the legs and align all 4
edges of the glass top with the wood panel.
2 Person Task
Adjustable
Leveler
Completed Table