Body Craft BCG-GX User manual

INSTRUCTION MANUAL
OPTION OF GX GYM (BCG-GX)
LEG PRESS
MZ6882
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.

BEFORE YOU BEGIN
Congratulations and thank you for selecting the BODYCRAFT GX GYM LEG
PRESS strength training system. The BODYCRAFT GX GYM LEG PRESS
offers an impressive array of strength training exercises to develop every major
muscle group of the body.
Whether your goal is cardiovascular fitness, a shapely, toned body or dramatic
muscle size and strength, the BODYCRAFT GX GYM LEG PRESS will help
you achieve the specific results you want.
For your safety and benefit, read this manual and the accompanying literature
before using the BODYCRAFT GX GYM LEG PRESS. Keep this manual for
future reference. If you have additional questions, please call your local
BODYCRAFT dealer or our customer service department at 800-990-5556
Monday through Friday, 9 a.m. until 5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
1
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with pre-existing health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1.This product must be assembled on a flat, level surface to assure its
proper function.
2.Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3.Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4.Keep children away from the BODYCRAFT GX GYM LEG PRESS at
all times.
5.Keep your hands away from cables and pulleys during operation.
Keep your hands away from moving parts other than the designated
handles.
6.Make certain all cables are seated within the pulleys before every use.
7.Exercise with care to avoid injury.
8.If unsure about the proper use of the BODYCRAFT GX GYM LEG
PRESS strength training system call your local BODYCRAFT dealer or
our customer service department at 800-990-5556.

220
232
236
232
236
218
213
230
235
224
237
235
235
225
212
230
224
235
215
212
238
216
205
201
201
237
235
225
235
225
207
2
1
21
235
206
216
216
221
221
210
210
208
226
235
235
226
227
241
233
223
202
214
236
236
229
238
223
236
231
211
240
240
234 241
234
204
239
211
238
239
228
228
236
238
236
236 222
242
236
236
238
235
209
243
235
226
241
226
241
219
203
243
235
235
237
237
238
2
EXPLODED

201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
3
1
1
1
1
2
1
2
2
2
4
1
2
1
2
2
2
1
2
11
12
2
6
2
2
4
1
2
BASE STABILIZER
MAIN FRAME
LEG PRESS SUPPORT
SEAT HANDLE
BACK PAD ADJUSTER
FOOT PLATE
RUBBER STOPPER
φ25mm AXLE
φ3/4" AXLE
COLLAR
1-1/4" X 360mm HAND GRIP
(pre-assembled)
NON SLIP
BACK PAD
SEAT PAD
114mm PULLEY
90mm PULLEY
LEG PRESS CABLE
LOCKING SPRING KNOB
50 X 75mm RECT. PLUG
45mm SQ. PLUG
BEARING
LEG PRESS STOPPER
LEG PRESS BUSHING
1/2" X 4-1/4" HEX BOLT
1/2" X 3-1/4" HEX BOLT
1/2" X 1" HEX THREADED BOLT
3/8" X 4" HEX BOLT
3/8" X 3-1/8" HEX BOLT
3/8" X 3" HEX BOLT
3/8" X 1-3/4" HEX BOLT
3/8" X 2-3/4" HEX THREADED BOLT
3/8" X 1" HEX THREADED BOLT
3/8" X 5/8" SET SCREW
(pre-assembled)
5/16" X 1-1/4" HEX THREADED BOLT
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT
3/8" NYLON NUT
5/16" NUT (pre-assembled)
SEAT PAD SUPPORT STOPPER
CAP FOR NUT
3/8" X 3-1/2" HEX BOLT
3/4" BUSHING
PARTS LIST
NO. DESCRIPTION QTY.
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/41" 2" 3" 4" 1/4 1/2 3/4 1/4 1/2 3/45" 6"
(inch)
3
202
204
205
201
203
206
207 208 209 210 211 212
213
214
215 216
218 219
224
230
236 241
237
231
232
238 243233
234 239
235 240225
226
227
228
229
220 221 222 223
217
242

To ease assembly , Do Not tighten any bolts until instructed.
1. Attach the Base Stabilizer (201) to the Base Frame (1), using
two 1/2" X 3-1/4" Hex Bolt (225), three 1/2" Washers (235) and
one 1/2" Nylon Nut (237).
STEP 1 ASSEMBLE BASE FRAME
4
201
237
235
1
235
225

STEP 2 ASSEMBLE MAIN FRAME
5
230
201
215
203
226
241
206
224
238
216
224
230
235
235
226
241
209
242
229
216
223
236
228
204
202
236
236
236
228
238
238
238
235
235
237
238
241
235
226
227
208
210
210
236
214
213
205
236
223
231
236
238
236
235
235
235 226
241
232
218
232 236
236
1. Attach the Main Frame (202) to The Base Stabilizer (201), using two 1/2" X 4-1/4" Hex
Bolts (224), four 1/2" Washers (235) and two 1/2" Nylon Nuts (237).
2. Insert the 25mm Axle (208) into the Leg Press Support (203), then attach to the Main
Frame (202) using two Collars (210) {inside the brackets on the Main Frame (202)}, two
1/2" X 1" Hex Threaded Bolts (228), and two 1/2" Washers (235). Tighten the bolts and
then cap with two End Caps (241).
3. Insert the 3/4" Axle (209) into the top hole in the Leg Press Support (203), then attach
the Foot Plate (206) using two 1/2" X 1" Hex Threaded Bolts (226), and two 1/2"
Washers (235). Tighten the bolts and then cap with two End Caps (241).
4. Attach Seat Handle (204) to the Main Frame (202), using two 3/8" X 3-1/8" Hex Bolts
(228), four 3/8" Washers (236) and two 3/8" Nuts (238).
5. Attach Seat Pad (214) to the Main Frame (202), using
two 3/8" X 2-3/4" Hex Threaded Bolts (231) and two 3/8"
Washers (236).
6. Attach Back Pad (213) into the Back Pad Adjuster (205),
using two 3/8" X 1" Hex Threaded Bolts (232) and
two 3/8" Washers (236). Then slide the Back Pad
Adjuster (205) to the Main Frame (202) and lock
at your desired position using the Spring Knob
(218).

6
STEP 3 ASSEMBLE LEG PRESS CABLE
Assemble cables and pulleys simultaneously.
1. Locate the Floating Pulley Block (21) assembled to the base unit of the GX. Unscrew
the Floating Pulley Block (21). Screw the Rubber Stopper (207) into the Top Frame
(2) in place of the Floating Pulley Block (21). Flip the Floating Pulley Block (21) over
(you will need to remove the pulley when doing this) so that the flat end of Floating
Pulley Block (21) is resting against the Rubber Stopper (207) as shown in Fig. 1.
2. Screw the threaded end of the Leg Press Cable (217) about half way into the
threaded receptacle in the Floating Pulley Block (21). This is an adjustment area
where the cable can be tightened or loosened. Be certain to always have at least one
third of the threaded end of the cable screwed into the Floating Pulley Block (21).
Also be certain to tighten the locking nut securely to prevent the cable from
unscrewing.
3. Route the flat end of the cable down and under the vertical pulley (216) mounted to
the Base Stabilizer (201) using one 3/8" X 1-3/4" Hex Bolt (230) and one 3/8" Nylon
Nut (238) as shown in Fig. 2.
4. Continue routing the cable over to the horizontal Pulley (216) mounted to the Base
Stabilizer (201) using one 3/8" X 1-3/4" Hex Bolt (230) as shown in Fig. 3.
5. Route the cable under a pulley mounted under the seat using two Leg Press
Bushings (223), one 3/8" X 3" Hex Bolt (229), two 3/8" Washers (236), and one 3/8"
Nylon Nut (238) as shown in Fig. 4.
6. Continue routing over top of a pulley mounted in the end of the Leg Press Support
(203) using two Leg Press Bushings (223), one 3/8" X 3" Hex Bolt (229), two 3/8"
Washers (236), and one 3/8" Nylon Nut (238) as shown in Fig. 5.
7. Attach the flat end of the cable to the base of the Leg Press Support (203) using one
3/8" X 4" Hex Bolt (227) and one 3/8" Nylon Nut (238).

STEP 3 ASSEMBLE LEG PRESS CABLE
7
FIG 1
FIG 2
FIG 3
FIG 4 FIG 5 FIG 6
FIG 3
230
216
FIG 2
216
238
230
FIG 4,5,6
FIG 5
FIG 4
FIG 6
223
238236
242
236
238
229
227
238
236
236
223
Leg Press Cable (217)
Flat End Threaded End
FIG 1
207
124
101
21
65
217

1. Make certain all bolts are tightened securely.
2. Make certain all cables are seated into all pulley grooves. A cable
rubbing-against steel will peel the nylon coating, voiding warranty
and resulting in a need for replacement.
3. Pre-stretch the cables. Pull on the cables with great force, helping
remove any links and providing any initial cable stretch.
4. Be aware the cables can loosen and slightly stretch upon initial use.
5. For better performance, apply a household lubricant (such as silicone)
to any adjustable areas.
6. Enjoy many years of a Fit Lifestyle.
Assembly is complete! Please take the following steps before using the gym:
Thank you for purchasing the BodyCraft GX GYM LEG PRESS. If
You have any questions, please call your local BodyCraft dealer or
call our customer service department at 800-990-5556