Body Solid SDB-351G User manual

BODY-SOLlD,lnc.
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Phone:[phone]
Fax:[phone]
www.bodysolid.com
SD8·351 G OWNER'S MANUAL

SDB351 G ASSEMBLY INSTRUCTIONS
HARDWARE ILLUSTRATION
A1. 1/2"X3 1/4" HEX HEAD BOLT ---------------------------------------------[16PCS]
A2. 1/2"X3 1/2" HEX HEAD BOLT -----------------------------------------------[4PCS]
A3. 5/16"X1 1/4" HEX HEAD BOLT ---------------------------------------------[4PCS]
B1. 1/2" NYLON LOCK NUT -----------------------------------------------------[20PCS]
C1. 1/2" (I.D) WASHER -----------------------------------------------------------[40PCS]
C2. 1/2" R0UND WASHER ------------------------------------------------------[40PCS]
C3. 5/16" (I.D) WASHER -----------------------------------------------------------[4PCS]
C4. 5/16" SPRING WASHER ------------------------------- ---------------------[4PCS]
D1. 1/2" BOLT CAP (9212-024) --------------------------------
----- ----------[40PCS]
D3. D45X45 END CAP (9211-091) ----------------------------------------------[2PCS]
D4. 50X75 END CAP (9211-084) -------------------------------------------------[2PCS]
05. ¢2" NYLON WASHER (9214-001) -----------------------------------------[4PCS]
07 . 4"X23X8" FOAM ROLLER (9161-018) ------------------------------- ----[4PCS]
08 . ¢1" ROUND END CAP (9211-022) ----------------------------------------[4PCS]
A1 A2 A3 B1
C1
e
~
~
~
C2 C3 C4 D1 D3
~
~
~
e
04
D5 D7 D8 ®
• @
III III III IIII)
5D8351 G 082005
Page 1

SDB351 G ASSEMBLY INSTRUCTIONS
PARTS ILLUSTRATION
A.[2PCS]
•
B.[1PCS]
o0
ll--- -Q
G.[2PCS]
C.[1PCS] o
E .[1 PCS]
D.[1PCS] H.[4PCS] 1.[2PCS]
8313-075 8312-062
J.[4PCS]
8333-001
K.[2PCS] 8343-062
F.[1PCS] 9111-010 .)
5D8351 G 082005
Page 2

SDB351 G ASSEMBLY INSTRUCTIONS
ASSEMBLY-STEP 1
D4X2
c/
i
I
A
•
A1X8
D1XB "-0<;XB
!
C1X8 B1X8
C1XB \} ) ;<B C2x ~2~~
A
HX4 •
C1X4 ~
IX2 II
D
I
I
r
\ ~ C 1 X 4
\ C2X4
D1X4 B1X4
Page 3
5D8351 G 082005

SDB351 G ASSEMBLY INSTRUCTIONS
ASSEMBLY-STEP 2
Caution when inserting
the foot holder into the
solt do so with caution
as to not damage the
J'
/
/~
D3X2
~
D5X4
~
D7X4 ~
D8X4
D1X6
~ A1X6
~
C1X6
C2X6/
. / B1X6
C1X6 '
'tJ -L
\,
A1X2 ~ :----..
~ ~ D1X2 C3X4
C1X2 /
,~ ~ .
C2X2 A3X4 C4X4
/
bushings.
~>
Q>C2X6 D1X6
KX2
THERE IS A RISK ASSUMED BY INNOIVIOUALS WHO USE THIS TYPE OF
EQUIPMENT TO MINIMIZE RISK. YOU MUST FOLLOW THESE RULES:
1 Inspect equipment before each workout. Checke that all nuts .
bolts, screws and pop pines are in place and fully Ughtened.
Also.before use, check cables for signs of wear. Replace all
worn parts lmrnediately. Never use machine if any parts are
damaged or missing. Failure to follow these rules may result
in serious Injury.
2. Keep clear of the cables and all moving parts when the machine
is in use.
3. Always make sure all Snap Links are closed when doing ny
cable/pulley exercises.
4. Exercise with care. Perform your exercises at a smooth moderate
pace; never perform jerky or uncoordinated movements that may
cause injury.
• . It is recommended that you should workout with a trarnmq partner
6. Do not allow children or minors to play on or arounrJIhis equipmeru.
7 If unsure of proper use of equipment, call your local Body-Solid
distributor or the Body-Sohd customer service department al
1-800-556-3 113.
8 WARNING: Consull your physician before starting your exercise program
For your own safety do not begin an y exercise proqrram withou t proper
instruction ' RAL2-11-
913
Page 4
5D8351 G 082005