Boneco F220 User manual

F220/F230
MANUAL
READ AND SAVE THESE INSTRUCTIONS
LIRE ET SAUVEGARDER CES INSTRUCTIONS
LEA Y GUARDE ESTAS INSTRUCCIONES

Instructions for use 3
Mode d’emploi 13
Instrucciones de uso 23

3
en
INSTRUCTIONS FOR USE
BONECO F220/F230

4
en TABLE OF CONTENTS
Technical data 5
Introduction 6
Items included 6
Overview and part names 7
Start-up 8
Handling 9
Handling 9
Alignment 9
Height adjustment 9
Positioning tips 10
Notes on output 10
Air-conditioning System (AC) 10
Fresh air 10
Multiple floors 10
Rooms with high ceilings 10
Cleaning 11
Safety instructions 11
Cleaning the housing 11
Cleaning the fan blades 11
Disassembly and storage 12

5
en
Technical data*
Model BONECO F220 – BONECO F230
Power supply voltage 120V ~ 60Hz
Power consumption 33 W (max. level)
Operation noise level 58 dBA (max. level)
Air flow 742 CFM (1260 m3 / h)
Air-speed 13 ft./sec (3.9m/s)
Dimensions L×W×H BONECO F220 14.8 × 14.6 × 33.5 in (375 × 375 × 850 mm) (with one connector piece)
BONECO F230 13.8 × 13.8 × 47.7 in (375 × 375 × 1210 mm) (with two connector pieces)
Weight (empty) BONECO F220 14.8lb (6.7 kg)
BONECO F230 19.6lb (8.9 kg)
TECHNICAL DATA
* Subject to change

6
en
ITEMS INCLUDED
BONECO fan unit Removable connector piece
(F220: 1×/ F230: 2×)
Base with power cord
Manual Safety instructions
DEAR CUSTOMER,
Congratulations on your purchase of the BONECO Air
Shower Fan. These high-performance units seamlessly
adapt to your needs. When set to the lower output levels,
they provide a pleasant breeze in your home on hot days.
On the other hand, if you use an air-conditioning system,
the unit's powerful fan distributes the air throughout the
room ensuring a uniform temperature.
In developing the BONECO Air Shower Fan, low mainte-
nance and durability were of primary importance. The fan
blade's one-of-a-kind shape creates a uniform air flow
using minimal energy, which is also good for the environ-
ment. The elegant design harmonizes with any decorative
style so that you can use your BONECO Air Shower Fan
throughout the entire year.
We hope you enjoy your new BONECO Air Shower Fan!
INTRODUCTION

7
en
BONECO F220
Air Shower Fan
BONECO F230
Air Shower Fan
1Output regulator
2Fan unit
3Removable connector piece
4Base with power cord
1
1
2
2
44
3
3
3
OVERVIEW AND PART NAMES

8
en
5
3
2
1
4
START-UP
BONECO F220 and BONECO F230 are only different
in that the BONECO F230 includes a second connec-
tor piece.
You can use the fan unit with one, with a second or
without connector pieces. It can be customized to
your needs.
Only place the base on a stable, level surface. Insert the connector piece into the base. Set the fan unit onto the connector piece.
Plug the power cord into a power outlet. Adjust the output using the control.

9
en
HANDLING
All BONECO Air Shower fans are designed for easy han-
dling. The output is adjusted in four levels using a single
control: 0 › I › II › III › IV
ALIGNMENT
The fan unit can be manually tilted 270 degrees.
The fan unit does not rotate a full 360 degrees.
HEIGHT ADJUSTMENT
All electrical components are completely integrated in the
connector. Therefore, you can adjust the height at any
time by adding connector pieces or by pulling sharply to
remove them.
For safety reasons, a maximum of two connector
pieces can be used at once.
HANDLING
270°

10
en
NOTES ON OUTPUT
All BONECO Air Shower fans are equipped with a high-
performance fan that can move large amounts of air.
Making use of this feature: Guide the air in a specific di-
rection to achieve an uniform room climate. The following
examples illustrate how to do this.
POSITIONING TIPS
ROOMS WITH HIGH CEILINGS
In air-conditioned rooms with high ceilings, the cold air
sinks to the floor while the warm air rises to the ceil-
ing. Turn the BONECO Fan straight up for an air-shower
sensation.
MULTIPLE FLOORS
In the summer, it can become hot and muggy on the upper
floors. The powerful BONECO Air Shower Fan directs the
cool air from the ground floor to multiple floors achieving
a uniform temperature.
AIR-CONDITIONING SYSTEM (AC)
An air conditioner distributes temperature in various
ways. Use the BONECO Air Shower Fan to move the warm
air towards the air-conditioning system. This can be done
directly or indirectly via air circulation, as shown in this
image.
FRESH AIR
The BONECO Air Shower Fan helps you achieve better
ventilation indoors. If cross-ventilation is not created,
guide fresh air directly from the window into the desired
room.

11
en
CLEANING
SAFETY INSTRUCTIONS
Always unplug the BONECO Air Shower Fan before
you begin cleaning! Failure to do so can result in
electric shock and fatal injury!
Do not use alcohol or corrosive cleaning agents for
cleaning.
Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
To reduce the risk of fire or electric shock, do not use
this fan with any solid-state speed control device.
CLEANING THE HOUSING
All BONECO Air Shower fans are designed for low-main-
tenance operation, even after years of use. In most cases,
a dry cloth can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp
cloth. Add a small amount of dishwashing detergent to
the water.
CLEANING THE FAN BLADES
1. Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by turning it counterclockwise
slightly.
3. Loosen the safety screw in the middle clockwise.
4. Remove the fan blades and clean them with a damp
cloth.
5. Put the unit back together by following the steps in
reverse order.
6. Attach the front grill with the safety screw. When
doing so, pay attention to the position of the screw
on the front grill.

12
en
21 3
DISASSEMBLY AND STORAGE
Storage is easiest and most efficient when you use
the original packaging. Store the BONECO Air Shower
Fan in a dry place.
Please note that the removable connector pieces are
detachable. When moving the unit to a new location,
disassemble the unit into the detachable parts,
transport the individual parts to the desired location,
and then reassemble.
Remove all connectors by pulling firmly.First remove the fan unit by firmly pulling it upwards.Unplug the power cord from the power outlet.