Bosch VIP X1 User manual

VIP X1/VIP X2 – Network video server

Copyright
This user guide is the intellectual property of Bosch Security Systemsand is
protected by copyright. All rights reserved. No part of this document may be
reproduced or transmitted for any purpose, by whatever means, electronic or
mechanical, without the express written permission of Bosch Security Systems.
Release: October 2005 (Software version 1.5)
© Copyright 2005 Bosch Security Systems
Note
This user guide has been compiled with great care and the information it contains
has been thoroughly verified. The text was complete and correct at the time of
printing. The ongoing development of the products may mean that the content of
the user guide can change without notice. Bosch Security Systems accepts no
liability for damage resulting directly or indirectly from faults, incompleteness or
discrepancies between the user guide and the product described.
Trademarks
All hardware and software product names used in this document are likely to be
registered trademarks and must be treated accordingly.

Bosch Security Systems | 2005-10 | V1.5
VIP X1/VIP X2 | Installation and Operating Manual EN | 3
Contents 0
Chapter 1 Preface
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
EU Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rating plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2 Safety information
Electric shock hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation and operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintenance and repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 3 Product description
Components supplied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
System requirements for setup . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Configuration requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operational requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Overview of functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rear panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 4 Installation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turning on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setup using a terminal program . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 5 Configuration using a Web Browser
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Choosing the configuration mode. . . . . . . . . . . . . . . . . . . . . . . . 27
Unit overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Function test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Chapter 6 Operation
Operation with Microsoft Internet Explorer . . . . . . . . . . . . . . . . . 89
The LIVEPAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Saving snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Recording video sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Bosch Security Systems | 2005-10 | V1.5
Installation and Operating Manual | VIP X1/VIP X2
EN | 4
Hardware connections between video servers. . . . . . . . . . . . . . 96
Establishing the connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Closing the connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Operation with decoder software . . . . . . . . . . . . . . . . . . . . . . . .99
Chapter 7 Maintenance and upgrades
Testing the network connection . . . . . . . . . . . . . . . . . . . . . . . . 101
Device reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Transfer and disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Chapter 8 Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Terminal block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Chapter 9 Index

VIP X1/VIP X2 | Installation and Operating Manual EN | 5
Bosch Security Systems | 2005-10 | V1.5 Preface
Preface 1
This user guide is intended for persons responsible for the installation and
operation of the VIP X. International, national and any regional regulations
regarding electronics must be followed at all times. Relevant knowledge of
network technology is required. The user guide describes the installation and
operation of the unit.
Conventions
In this user guide, the following symbols and notation are used to draw attention
to special situations:
Warning!
This symbol indicates that failure to follow the safety instructions described
may endanger persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
Note
This symbol indicates tips and information for easier, more convenient use
of the unit.

Installation and Operating Manual | VIP X1/VIP X2
EN | 6
Preface Bosch Security Systems | 2005-10 | V1.5
Intended use
The VIP X1 and VIP X2 network video servers transmit video and control signals
over data networks (such as Ethernet LANs and the Internet). Audio signals can
also be transmitted with the audio versions of the servers. The servers are
designed for use in CCTV systems. By incorporating external alarm sensors,
various functions can be triggered automatically. Other applications are not
permitted.
In the event of questions concerning the use of the units, which are not
answered in this manual, please contact your sales partner or:
Bosch Sicherheitssyteme GmbH
Robert-Koch-Straße 100
85521 Ottobrunn
Germany
www.bosch-sicherheitssysteme.de
EU Directives
The VIP X1 and VIP X 2 network video servers comply with the requirements of
EU Directives 89/336 (Electromagnetic Compatibility) and 73/23, amended by
93/68 (Low Voltage Directive).
Rating plate
For exact identification, the model name and serial number are inscribed on the
rating plate on the bottom of the housing. Please note this information if
necessary before installation so it will be available in case of questions or for
spare parts orders.

VIP X1/VIP X2 | Installation and Operating Manual EN | 7
Bosch Security Systems | 2005-10 | V1.5 Safety information
Safety information 2
Electric shock hazard
]Never attempt to connect the unit to any power network other than the type
for which it was intended.
]Use only the power supply provided.
]Never open the housing!
]If a fault occurs, disconnect the power supply unit from the mains supply and
from all other devices.
]Install the power supply and the unit only in dry, weather-protected areas.
]If safe operation of the unit cannot be ensured, remove it from service and
secure it to prevent unauthorized start-up. Safe operation is no longer
possible in the following cases:
– if there is visible damage to the unit or power cables,
– if the unit no longer works properly,
– if the unit has been exposed to rain or moisture,
– if foreign matter has infiltrated the unit,
– after long storage under adverse conditions or
– after exposure to extraordinary transport stress.
In such cases, have the unit checked by Bosch Security Systems.

Installation and Operating Manual | VIP X1/VIP X2
EN | 8
Safety information Bosch Security Systems | 2005-10 | V1.5
Installation and operation
]The relevant electrical regulations and guidelines must be complied with at all
times during installation.
]Relevant knowledge of network technology is required to install the unit.
]Before installing or operating the unit, make sure you have read and
understood the documentation for the other equipment connected, such as
cameras. The documentation contains important safety instructions and
information about permitted uses.
]Perform only the installation and operating steps described in this manual.
Actions beyond these may lead to personal injury, damage to property or
damage to the equipment.
Maintenance and repair
]Never open the housing of the VIP X. The unit does not contain any user
serviceable parts.
]Never open the housing of the power supply unit. The power supply unit does
not contain any user serviceable parts.
]Ensure that all maintenance or repair work is performed only by qualified
personnel (electrical engineering or network technology specialists).

VIP X1/VIP X2 | Installation and Operating Manual EN | 9
Bosch Security Systems | 2005-10 | V1.5 Product description
Product description 3
Components supplied
]VIP X1 or VIP X2 network video server (basic version or audio version)
]Power supply unit with four primary adapters
]Configuration cable
]Quick start guide in English/German
]Product CD with the following content:
– Quick start guide in English/German
– User guide in English/German
– Datasheet System Requirements
– MPEG ActiveX control
– MPEG viewer
– DirectX control
– Microsoft Internet Explorer
– Microsoft Virtual Machine
– Adobe Acrobat Reader
Note
Check that the delivery is complete and in perfect condition. Arrange for
the unit to be checked by Bosch Security Systems if you find any damage.
System requirements for setup
]Computer with Windows 2000/XP operating system, access to network and
Microsoft Internet Explorer (version 6.0 or later)
or
]Computer with Windows 2000/XP operating system, an available serial port
and terminal software

Installation and Operating Manual | VIP X1/VIP X2
EN | 10
Product description Bosch Security Systems | 2005-10 | V1.5
Configuration requirements
]Computer with Windows 2000/XP operating system, network access and
Microsoft Internet Explorer web browser (version 6.0 or later)
or
]Computer with Windows 2000/XP operating system, network access and
reception software, for example VIDOS
Note
You should also take note of the information in the System requirements
datasheet on the product CD supplied.
Make sure the graphics card is set to 16 or 32 bit colour depth and that
Microsoft Virtual Machine is installed on your PC. If necessary, the
required software and controls can be installed from the product CD
provided (see Components supplied, page 9).
Operational requirements
]Computer with Windows 2000/XP operating system, network access and
Microsoft Internet Explorer web browser (version 6.0 or later)
or
]Computer with Windows 2000/XP operating system, network access and
reception software, for example VIDOS
or
]MPEG-4 compatible hardware decoder from Bosch Security Systems (such
as VIP XD) as a receiver and a connected video monitor
Note
You should also take note of the information in the System requirements
datasheet on the product CD supplied.
Make sure the graphics card for receiving on the computer monitor is set
to 16 or 32 bit colour depth and that Microsoft Virtual Machine is installed
on the PC. If necessary, the required software and controls can be
installed from the product CD provided (see Components supplied,
page 9).

VIP X1/VIP X2 | Installation and Operating Manual EN | 11
Bosch Security Systems | 2005-10 | V1.5 Product description
Overview of functions
Network video server
The VIP X is an ultra-compact network video server for one (VIP X1) or two
(VIP X2) connected video sources. Its primary function is to encode video and
control data for transmission over an IP network. With its encoding in MPEG-4
format, the VIP X is ideally suited for adapting formerly analog cameras for IP
communication and for remote access to digital video recorders and
multiplexers.
About the size and shape of a cigarette packet, it can be integrated into small
housings without difficulty. The use of existing networks means that integration
with CCTV systems or local networks can be achieved quickly and easily.
Two units, for example a VIP X as the transmitter and another VIP XD as the
receiver, can form a stand-alone system for data transfer without a PC. Video
images from a single transmitter can be simultaneously received on several
receivers.
The audio version of the VIP X also allows the transmission of audio signals
from and to compatible units.
The PoE (Power-over-Ethernet) version of the VIP X enables power to be
supplied via the network cable without an external power adapter. This requires
a network infrastructure that supports PoE standard IEEE 802.11af.
Receiver
MPEG-4 compatible hardware decoders (for example VIP XD) can be used as
a receiver. Computers with decoding software such as VIDOS or computers with
the Microsoft Internet Explorer web browser installed can also be used as
receivers. The audio signals are played back in the computer by a soundcard;
you can connect suitable peripheral devices to audio-enabled hardware
decoders.
Video encoding
The VIP X uses the MPEG-4 compression standard. Thanks to efficient
encoding, the data rate remains low even with high image quality and can also
be adapted to local conditions within wide limits.

Installation and Operating Manual | VIP X1/VIP X2
EN | 12
Product description Bosch Security Systems | 2005-10 | V1.5
Dual Streaming
Dual Streaming allows the incoming data stream to be encoded simultaneously
according to two different, individually customized profiles. This creates two data
streams per camera that can serve different purposes, for example one for local
recording and one optimized for transmission over the LAN.
Multicast
In suitably configured networks, the multicast function enables simultaneous,
real time transmission to multiple receivers. The prerequisite for this is that the
UDP and IGMP V3 protocols are implemented on the network.
Remote control
For remote control of external devices, such as pan and tilt heads for cameras
or motorized zoom lenses, the control data is transmitted via the VIP X's bi-
directional serial interface. This interface can also be used to transmit
transparent data.
Configuration
The VIP X can be configured using a browser on the local network (Intranet) or
from the Internet.
Similarly, firmware updates and rapid loading ofdevice configurations are also
possible.
Snapshots
Individual video frames (snapshots) can be called up as JPEG images by the
VIP X, stored on the hard drive or displayed in a separate browser window.
Backup
On the LIVEPAGE you will find an icon for saving the video images provided by
the unit as a file on your computer's hard drive. Clicking this icon stores the video
sequences and they can be replayed with the MPEG viewer from
Bosch Security Systems included with the package.

VIP X1/VIP X2 | Installation and Operating Manual EN | 13
Bosch Security Systems | 2005-10 | V1.5 Product description
Summary
The VIP X provides the following main functions:
]Video and data transmission over IP data networks
]Dual Streaming function for the encoder for simultaneous encoding with two
individually definable profiles
]Multicast function for simultaneous picture transmission to multiple receivers
]One analog BNC video input FBAS (PAL/NTSC) on the VIP X1
Two analog BNC video inputs FBAS (PAL/NTSC) on the VIP X2
]Video encoding using international MPEG-4 standard
]Integrated Ethernet interface (10/100 Base-T)
]Transparent bi-directional data channel using a serial interface
RS232/RS422/RS485
]Remote control of all built-in functions via TCP/IP
]Password protection to prevent unauthorized connection or configuration
changes
]Four relay inputs for external sensors (such as door contacts)
]Relay output for switching external devices (such as luminaires or sirens)
]Built-in video sensor for motion and tamper alarms
]Event-driven, automatic connection (for example at switch-on and for alarms)
]Automatic transmission of alarm e-mails with image attachment
]Fast, convenient configuration using the integrated Web server and a
browser
]Firmware update through flash memory
]Convenient upload of configuration data
]Power supply by Power-over-Ethernet to IEEE standard 802.11af (optional)
The various audio versions also offer:
]Transmission and receipt of audio signals
]Two-way audio (mono) for line or microphone/speaker links
]Audio encoding to international standard G.711

Installation and Operating Manual | VIP X1/VIP X2
EN | 14
Product description Bosch Security Systems | 2005-10 | V1.5
Front panel connections
1Audio line input Line In (audio versions only)
3.5 mm stereo jack sockets for connecting one (VIP X1) or two (VIP X2)
audio line input signals
2Terminal connector (audio versions only)
for microphone and loudspeaker connections
3Audio line output Line Out (audio versions only)
3.5 mm stereo jack socket for connecting an audio line output signal
4Video input Video In 2
BNC jack for connection of second video source
5Video input Video In 1
BNC jack for connection of video source

VIP X1/VIP X2 | Installation and Operating Manual EN | 15
Bosch Security Systems | 2005-10 | V1.5 Product description
Rear panel connections
6USBinterface
for future expansion of functions
7Factory-reset button
to restore default settings
8Terminal block
for alarm inputs, relay output, serial interface and power supply
9Operating status LED
flashes green when ready for operation
10 LED L
lit green when the unit is connected to the network
11 LED T
flashes orange when data is being transmitted over the network
12 RJ45 jack ETH
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
Further information on the LEDs can be found on page 105. Information about
the pin assignment can be found on page 106.

Installation and Operating Manual | VIP X1/VIP X2
EN | 16
Product description Bosch Security Systems | 2005-10 | V1.5

VIP X1/VIP X2 | Installation and Operating Manual EN | 17
Bosch Security Systems | 2005-10 | V1.5 Installation
Installation 4
Thanks to its ultra-compact dimensions, the VIP X is particularly well suited for
installation in cabinets.
Warning!
The unit is intended for use indoors or in protected spaces. Select a
suitable location for installation where the unit will not be subjected to
conditions of extreme temperature or humidity. The ambient temperature
must be between 0 and + 50 C (VIP X1) or between 0 and +40 C (VIP X2),
relative humidity may not exceed 80 %.
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Please ensure the following conditions for installation:
]Do not mount the unit close to heaters or other heat sources. Avoid locations
subject to direct sunlight.
]Allow sufficient space for running cables.
]Ensure that the unit has adequate ventilation.
]Use only the cables supplied for connections or appropriate cables resistant
to electromagnetic interference.
]Position and run all cables so that they are protected from damage, and
provide strain relief where needed.
]Avoid shocks, bashes and strong vibrations as they might destroy the unit.

Installation and Operating Manual | VIP X1/VIP X2
EN | 18
Installation Bosch Security Systems | 2005-10 | V1.5
Connections
Cameras
Depending on the device used, you can connect one (VIP X1) or two video
sources (VIP X2). Any cameras or other video sources that produce a standard
PAL or NTSC signal are suitable.
– Connect the cameras or other video sources with a video cable (75 Ohm,
BNC connector) to the BNC jack Video In or to the jacks VideoIn1and
Video In 2.
Audio connections (audio versions only)
The audio version of the VIP X has two audio ports for audio line signals as well
as a microphone input and a loudspeaker output.
The audio signals are transmitted both ways and in sync with the video signals.
This means that you can operate, say, a loudspeaker or door interphone at the
destination site.
Note
If possible you should use the line ports of the interphone for transmitting
audio signals on interphone systems. The following specifications should
be complied with in all cases.
Line In: Impedance 9 kOhm typ., 5.5 Vp-p max. input voltage
Line Out: Impedance 16 Ohm min., 3 Vp-p max. output voltage
MIC (microphone): Impedance 2 kOhm typ., 2.8 Vp-p max. input voltage,
-20 dB in, supply 2.3 V typ.
SPK (loudspeaker): Impedance 4 Ohm min., 6 Vp-p max. output voltage,
power output 1 W rms
The stereo jack plugs must be connected as follows:
Contact VIP X1 VIP X2
Tip Channel 1 (Camera 1) Channel 1 (Camera 1)
Middle ring Not used Channel 2 (Camera 2)
Lower ring GND GND

VIP X1/VIP X2 | Installation and Operating Manual EN | 19
Bosch Security Systems | 2005-10 | V1.5 Installation
– Connect an audio source with line level to the Line In jack socket of the VIP X
with a 3.5 mm stereo jack plug.
– Connect a device with line-in connection to the Line Out jack socket of the
VIP X with a 3.5 mm stereo jack plug.
If you wish to connect a microphone and a loudspeaker directly:
– Connect the microphone cords to the MIC and GND connections on the push-
in terminal.
– Connect the loudspeaker cords to the SPK connections on the push-in
terminal.
Data interface
The bi-directional data interface is used to control devices connected to the
VIP X, such as a dome camera with a motorized lens.
The interface supports the RS232, RS422 and RS485 transmission standards.
The serial interface is made up of four terminals of the ST500 jack (for pin
assignment see page 106).
The range of controllable devices is growing constantly. The manufacturers of
this equipment can provide specific information on installation and control.
Warning!
Refer to the device documentation when installing and operating a device
to be controlled. This contains important safety instructions and
information about permitted uses.
Note
A video connection is necessary to transmit transparent data.
Network
You can connect the VIP X to a 10/100 Base-T network. Use a standard UTP
Category 5 cable with RJ45 connectors for this.
– Connect the unit to the network using the ETH jack.
Alarm inputs
The VIP X has four alarm inputs on the orange terminal block (for pin
assignment, see page 106). The alarm inputs are used to connect to external
alarm devices, such as door contacts or sensors. With the appropriate

Installation and Operating Manual | VIP X1/VIP X2
EN | 20
Installation Bosch Security Systems | 2005-10 | V1.5
configuration, an alarm sensor can, for example, trigger an automatic
connection between the VIP X and a remote location.
A voltage free make contact or switch can be used as an actuator.
Note
If possible, use a bounce-free contact system as the actuator.
– Connect the lines to the appropriate terminals on the orange terminal block
(IN1 to IN4) and check that the connection is secure.
Relay output
The VIP X has a relay output for switching external devices, such as lights or
audible alarms. This relay output can be activated manually during an active
connection with the VIP X. Moreover, the output can be configured to activate
audible alarms or other devices as a response to an alarm signal. The relay
output is also located on the orange terminal block (for pin assignment, see
page 106).
Warning!
The maximum rating of the relay contact is 30 V and 2 A.
– Connect the lines to the appropriate terminals (R) on the orange terminal
block and check that the connection is secure.