Braun perfusor compact User manual

Perfusor® compact
Service Manual
0 - 10
3.1
0-Version 3.1 English

0
0- 2 Perfusor® compact, 2.1 gb
2.1
This Service Manual is valid for Designation Part No.:
Perfusor® compact (230 ...240 V, Euro cable) . . . . . . . 0871 4827
Perfusor® compact (230 ...240 V, BSI cable) . . . . . . . . 0871 4828
Perfusor® compact (100 ... 120 V). . . . . . . . . . . . . . . . . 0871 4835
This Service Manual is available under
the following part number:
Designation Part No.
Service Manual Perfusor® compact, English . . . . . . . . 8713 9112
Languages of this Manual The Service Manual for this unit can be supplied in the following
languages:
Designation Part No.
Service Manual Perfusor® compact, German . . . . . . . . . 8713 9111
The complete Service Manual contains
the following pages:
Page 0-1 to page 0-10
Page 1-1 to page 1-4
Page 2-1 to page 2-6
Page 3-1 to page 3-18
Page 4-1 to page 4-18
Page 5-1 to page 5-6
Page 6-1 to page 6-2
Page 7-1 to page 7-2
Page 8-1 to page 8-6
Page 9-1 to page 9-2
Page 10-1 to page 10-4
Page 11-1 to page 11-4
Page 12-1 to page 12-2

Perfusor® compact, 3.0 gb 0- 3
0
0-Table of Contents
Important Preliminary Remarks Service Work Page 0 - 5
Technical Safety Checks Page 0 - 5
Current Versions Page 0 - 5
Revision Service Page 0 - 5
Responsibility of the Manufacturer Page 0 - 6
Quality Management Page 0 - 6
Checks and Repair Page 0 - 6
Notes on ESD Page 0 - 6
Spare Parts and Test Equipment Page 0 - 7
Setting Off Page 0 - 7
List of Abbreviations Page 0 - 8
Contact Persons Technical Training Page 0 - 9
Entry for Technical Training Page 0 - 9
Ordering of Spare Parts and Test Equipment Page 0 - 9
Service Hotline Page 0 - 9
Return of Spare Parts and Test Equipment Page 0 - 9
Safety Officer
(§ 30 MPG) Page 0 - 9
System Overview Physical Construction Page 1 - 1
Function Page 1 - 2
Accessories Page 1 - 3
Software Approved Software Versions Page 2 - 1
Version Display during Switch-On Test Page 2 - 1
Extended Version Display during Switch-On Test Page 2 - 1
Error Messages and Alarms Page 2 - 2
Service Program Software Compatibility Page 3 - 1
Introduction Page 3 - 1
Working with the Service Program Page 3 - 4
What To Do If ... (Trouble Shooting) Page 3 - 5
Menu Description Page 3 - 7
Procedural Instructions for Inspection after
Modifications via the Service Program Page 3 - 13
Unit Calibration Page 3 - 16
Checklist after Operation of the Service Program Page 3 - 18
Unit Elements Fundamental Repair Information Page 4 - 1
Syringe Table and and Quick Reference Guide Page 4 - 5
Syringe Holder Page 4 - 6
Unit Feet Page 4 - 6
Battery Compartment Cover Page 4 - 7
Snap-in Clip Page 4 - 7
A-Module Page 4 - 8
LS-Clip Page 4 - 9
E-Module Page 4 - 10
N-Module Page 4 - 11
Housing Upper Part, Complete Page 4 - 11
Carrying Handle Page 4 - 12
3.0

Table of Contents
0
0- 4 Perfusor® compact, 3.0 gb
Drive Page 4 - 12
Axial Positioner Page 4 - 13
Drive Board Page 4 - 14
Drive Head Page 4 - 15
Housing Bottom Part, Complete Page 4 - 17
Checks after Repair General Page 5 - 1
Check List for Checks after Repair Page 5 - 1
Visual Inspection Page 5 - 2
Functional Inspection Page 5 - 2
Electrical Safety Page 5 - 5
Maintenance Page 6 - 1
Technical Safety Check TSC Page 7 - 1
Procedural Instructions on the TSC Visual Inspection Page 8 - 1
Functional Inspection Page 8 - 2
Pressure Cut-Off Page 8 - 3
Syringes Page 8 - 4
Electrical Safety Page 8 - 4
Accessories Page 8 - 4
Optional Page 8 - 5
Test Equipment and Special Tools Page 9 - 1
Spare Parts List Page 10 - 1
Revision Documentation Description of Version Page 11 - 1
Version List of the Individual Pages Page 11 - 1
Index Page 12 - 1
3.0

Perfusor® compact, 2.1 gb 0- 5
0
0-Important Preliminary Remarks
Service Work The present manual is for your information only. The possession of
this manual does not authorize the performance of service work.
Service tasks may only be executed by persons, who
- have received appropriate training on the system from
B. Braun
- are included in the revision service
- possess the necessary test equipment and mechanical aids,
and
- fulfill the personal requirements (training and knowledge).
Technical Safety Checks The user is obliged to perform or to have performed the Technical
Safety Checks on those medial products for which these checks
have been prescribed by the manufacturer and to carry them out
according to the indications of the manufacturer as well as the
generally approved technical standards while adhering to the
periods stated (§ 6 MP BetreibV).
B. Braun also recommends training on the Technical Safety
Checks, or to perform at least the steps indicated in the current
version of the manual, as:
- the TSC requires that the instructions in the manuals are
observed
- the manuals are a reference for measurements
- depending on the unit type, the Service Program must be
called which may lead to a dangerous unit condition in case
of inappropriate operation. Furthermore, a special service
connector may be necessary.
Current Versions This manual version corresponds to the state when the manual
was written. B Braun reserves the right to make technical
modifications. The state of the revision is indicated by the index
number in the footer of every page.
Revision Service The possession of this manual does not automatically mean
inclusion in the revision service. You will be included in the
revision service after:
- technical training by B. Braun Melsungen or
- a written order placed with the sales department of B. Braun
(fee required).
2.1

Important Preliminary Remarks
0
0- 6 Perfusor® compact, 2.1 gb
Responsibility of the Manufacturer The manufacturer, person who assembles, installs or imports the
device can only be held responsible for safety, reliability and
performance if
- mounting, enhancements, new settings, changes or repairs
are carried out by duly authorized persons,
- the electrical installation in the corresponding room meets
the requirements of the VDE 0107, VDE 0100 part 710 or
IEC 60364-7-710 and the national standards,
- the device is used in accordance with the instructions for use
and the Service Manual,
- the Technical Safety Checks are performed at regular
intervals,
- a current manual which corresponds to the revision state is
used when carrying out maintenance, repair and service,
- the service technician takes part in the revision service,
- the technician has participated in a technical training course
for the specific B. Braun unit.
Quality Management B. Braun is certified in accordance with DIN EN ISO 9001 and
ISO 13485. This certification also includes maintenance and
service.
The unit has the CE label. The CE label confirms that the device
corresponds to the “Directive of the Council for Medical Products
93/42/EC” of June 14, 1993.
Checks and Repair Training may only be performed by B. Braun. The possession of the
manual does not authorize the performance of repairs. The
instructions on electrostatic sensitive components (ESD
standards) must be observed.
After repair a device check or diagnosis is to be carried out.
Notes on ESD Semiconductors can be destroyed by electrostatic discharge.
Especially MOS components can be damaged by interference from
electrostatic fields, even without discharge via contact. This type
of damage is not immediately recognizable. Unit malfunctions
can even occur after a longer period of operation.
2.1

Important Preliminary Remarks 0
Perfusor® compact, 2.1 gb 0- 7
2.1
Each workstation must be equipped according to the
recommendations with the necessary static protective measures,
if ESD components or boards are handled.
Each workstation must be equipped with a conductive table
surface. The conductive surface, the soldering iron or the
soldering stations must be grounded via protective resistors.
Chairs must be of antistatic design. The floor or floor mats should
be of electrically conductive material.
Personnel must wear conductive wristbands which are connected
to a central ground potential via protective resistors, e.g. the
ground contact of a wall outlet. Furthermore it is recommended
that personnel wear cotton clothing and electrically conductive
shoes to prevent electrostatic charge.
Spare Parts and Test Equipment Only use original spare parts from the manufacturer. Do not
tamper with assembly groups which can only be exchanged
completely. The spare parts required are listed in the repair
descriptions.
Service personnel are responsible for the calibration of their test
equipment. Original test equipment can be calibrated at the
works of B. Braun. Further information is available upon request.
Setting Off Additional notes and warnings are set off as follows:
Note
Is used for additional or special notes concerning information and
working steps.
CAUTION
Is used for working steps which may result in damage to the unit,
system or to a connected device.
WARNING
!
IS USED FOR WORKING STEPS WHICH MAY RESULT IN PERSONAL
INJURY.
Fig.: 0 - 1

Important Preliminary Remarks
0
0- 8 Perfusor® compact, 2.1 gb
2.1
References to chapters are shown as follows
(see „Setting Off“ ➨p. 0 - 7)
References to figures and tables are shown as follows
Fig.: 2 - 3 or Table 2 - 1
References to item numbers in figures are shown as follows
(Fig.: 1 - 1 / Item 1)
In this case “Fig.: 1 - 1“ is the figure number and “Item 1“ the item
number within the figure.
When the Service Manual is stored as pdf-file, these references
are displayed green. Click with the mouse button on a reference
to jump to the corresponding source.
Menu commands are described as:
Menu
File .
List of Abbreviations Abbreviations which are not generally known, but are used in this
manual, are listed below.
A-Module Analog Module
E-Module Electronic Module
ESD Electrostatic Discharge
IfU Instructions for Use
LCD Liquid Crystal Display
MFC Multi-Function Connector
PS-Module Power Supply Module
TSC Technical Safety Checks
TEMP Temperature

Perfusor® compact, 3.1 gb 0- 9
0
0-Contact Persons
Technical Training Via local representative.
Entry for Technical Training Application for a technical training course must be made via the
responsible representative.
Ordering of Spare Parts and Test Equipment Please contact your local B. Braun subsidary.
International Technicians (Intercompany)
Irene Marchel
Fax: [phone] / 75 - 38 57
e-mail: [email protected]
Service Hotline Martin Heusner
Phone: [phone] - 35 25
Fax: [phone] - 35 26
E-Mail: martin.heu[email protected]
Return of Spare Parts and Test Equipment B. Braun Melsungen AG
Schwarzenberger Weg 73-79
Wareneingang Werk C
34 212 Melsungen
Germany
Safety Officer
(§ 30 MPG)
Dr. Ludwig Schütz
e-mail: [email protected]
0 - 10
3.1

Contact Persons
0
0- 10 Perfusor® compact, 2.1 gb
For your notes:
2.1