Breezesta AD-0102 User manual

REV02-2/19
COASTAL ADIRONDACK
AD-0102
1 AD-0102 Assembly

A
B
C
D
F
E
a b c d e
Suggested Tools:
Drill, Plastic Mallet
G
H
PARTS
PART DESCRIPTION PART NO. QTY
A LEFT FRONT LEG PRT-00123 1
B RIGHT FRONT LEG PRT-00125 1
C UNDER ARM SUPPORT PRT-00124 2
D LEFT ARM ASSEMBLY SA-00046 1
E RIGHT ARM ASSEMBLY SA-00047 1
F ADIRONDACK SPREADER SS-22.187 1
G BASE ASSEMBLY SA-00043 1
H BACK ASSEMBLY SA-00048 1
HARDWARE
PART DESCRIPTION PART NO. QTY
a #8 X 1-1/2" TORX SCREW H-0000-S815 2
b #8 X 2" TORX SCREW H-0000-S82 6
c 5/16" X 1-1/2" CHAIR BOLT H-0000-CB51615 8
d DOUBLE SCREW H-0000-DS 2
e T20 & T25 TORX BIT H-0000-CTD 1
AD-0102 Assembly 2

A
D d
T20
C
b
x2
T20
a
x2
F
T25
G
c
x4
1.
Attach Part A to Part D by inserting Hardware d
into the pre-drilled holes and rotating Part A
clockwise, stopping when the assembly is tight
2.
Place Part C into the pre-
cut slot and attach it using
Hardware b
4.
Attach Part F to the previous
assemblies using Hardware a
5.
Place Part G between the previous
assemblies & attach it using Hardware c
Please read entire instructions
before beginning
3.
Repeat Steps 1-2 for
Parts B, C, & E
3 AD-0102 Assembly

T20
H
T25
c
x4
b
x2
6.
Attach Part H as shown
4 AD-0102 Assembly