Breezesta fiberon Furniture FIB-CI-1801 User manual

Chill Side Beverage Table /
Chill Side Table
FIB-CI-1801 / FIB-CI-1804
FIB-CI-1801
Chill Side Beverage Table
FIB-CI-1804
Chill Side Table

2FIB-CI-1801 / FIB-CI-1804 Assembly 5/21
Chill Side Beverage Table / Chill Side Table Furniture Parts
Part Description Part Number 1801 Quantity 1804 Quantity
A Chill Side Beverage Table Top Assembly SA-00431 1 -
A Chill Side Table Top Assembly SA-00445 - 1
BTop Insert Assembly SA-00432 1 -
CMiddle Support Assembly SA-00433 1 1
DLeg PRT-00775 4 4
EWine Bucket Insert H-0000-WB 1 -
Chill Side Beverage Table / Chill Side Hardware Parts
Part Description Part Number Quantity
a#8 x 1- in. Torx Screw H-0000-S815 4
b#8 x 2 in. Torx Screw H-0000-S82 1
cT20 and T25 Torx Bit H-0000-CTD 1
Suggested Tools
Drill
Plastic Mallet
Please read entire instructions before beginning.
a b c
A1
A2
B
C
D
E

3FIB-CI-1801 / FIB-CI-1804 Assembly 5/21
1. Start with a Leg Dand the Middle Support C. Holding a Leg Din a
corresponding slot in the Middle Support C, fasten the leg using
one of Hardware b. The ledge of the leg should be against the
bottom of the Middle Support Cand the leg should be pushed
against the inside of of the slot. Repeat for all four legs.
2. Place the Table Top Assembly A1 or A2 upside down on a non-
marring surface. Turn the leg assembly from the previous step
and push the tops of each Leg Dinto the four slots in the bottom
of the table top. Make sure the shoulder of the leg is firmly
against the table bottom. Fasten using four of Hardware a.
*One leg not
shown for clarity. Top View
Leg Shoulder
Bottom Surface of
Table Top A1 or A2
b x 4
D x 4
C
A1 or A2
a

4FIB-CI-1801 / FIB-CI-1804 Assembly 5/21
3. For Side Beverage Table only.
Turn the assembled table onto its feet.
Slide the Wine Bucket Insert Einto the
hole in the center of the table. Place the
Top Insert Assembly Binto the table.
©2021 Fiberon. All rights reserved. FIBERON and the Fiberon logo are trademarks of Fiber Composites, LLC. Registered trademarks are registered in the U.S. and may be registered internationally.
E
B
A1