Breville the Milk Cafe BMF600 User manual

BMF600
the Milk Café™
Instruction Booklet

CONGRATULATIONS
on the purchase of your new
Breville product

3
CONTENTS
4Breville recommends safety first
6Know your Breville product
8Operating your Breville
product
12 Care & cleaning
13 Hints & tips
14 Troubleshooting
15 Recipes

4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operation and save for future reference.
• Remove and safely discard any
packaging material and promotional
labels before using the Breville
Milk Café™ for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
• Do not place the Breville Milk Café™
near the edge of a bench or table
during operation.
• Do not place the appliance on or near a
hot gas burner, electric element or where
it could touch a heated oven.
• Do not operate the appliance on a sink
drain board.
• Ensure that the surface is level, clean
and free of water.
• The Breville Milk Café™ is not intended
to be operated by means of an external
timer or separate remote control system.
• To protect against electric shock, do not
immerse the power base, power cord or
power plug in water or allow moisture to
come in contact with these parts.
• Always switch the Breville Milk Café™
off at the power outlet and unplug
if appliance is to be left unattended,
if not in use, before cleaning, before
attempting to move the appliance,
disassembling, assembling and when
storing the appliance.
• The Breville Milk Café™ is not
intended for use by young children or
infirm persons unless they have been
adequately supervised by a responsible
person to ensure they can use the
appliance safely.
• The Breville Milk Café™ has been
designed specifically for the purpose
of foaming milk and other dairy milk
alternatives and is not intended to
thicken or heat other food substances
eg. cream, custards, soups, gravies.
• The Breville Milk Café™ is not
designed to mix a large quantity of dry
ingredients or melt large food pieces
eg. cubed chocolate, ground nuts, whole
spices, fresh herbs.
• The underside of the jug must always
be dry before placing onto power base
before use.
• The jug must only be used with the
power base provided. Do not use
attachments other than those provided
with the Breville Milk Café™.
• Attach the jug lid securely to the jug
before operation. Do not open the jug lid
during operation.
• Use caution when operating unit as
heating metal jug surface is liable to get
hot during use.
• Use caution when pouring foamed milk
from the jug after heating as hot milk
may scald at high temperatures.
• Do not operate the appliance without
liquid. Always fill to at least the ‘MIN’
marking and no more than the 'MAX'
marking inside the jug.
• Do not put metal or similar items into
the jug as this may damage or affect the
operation of the unit.
IMPORTANT SAFEGUARDS

5
BREVILLE RECOMMENDS SAFETY FIRST
5
• Keep the appliance and accessories
clean. Follow the Care and Cleaning
instructions provided on Page 16.
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Fully unwind the power cord before use.
• Do not let the power cord hang over
the edge of a bench or table, touch hot
surfaces or become knotted.
• To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
• The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• It is recommended to regularly inspect
the appliance. To avoid a hazard do not
use the appliance if power cord, power
plug or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.
• The installation of a residual current
device (safety switch is recommended
to provide additional safety protection
when using electrical appliances. It is
advisable that a safety switch with a rated
residual operating current not exceeding
30mA be installed in the electrical
circuit supplying the appliance. See your
electrician for professional advice.
• Appliances can be used by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
WARNING
• Always ensure frothing disc is
inserted firmly into jug before use.
• Frothing disc is a choking
hazard. Children must always
be supervised and never left
unattended with appliance.
• Never immerse the power base,
power cord or power plug in water
or allow moisture to come into
contact with these parts.
BREVILLE ASSIST™ PLUG
• Your Breville appliance comes with
a unique Assist™ Plug, conveniently
designed with a finger hole in the
power plug for easy and safe removal
from the wall outlet. For safety reasons
it is recommended you plug your
Breville appliance directly into its own
electrical outlet on a dedicated circuit
separate from other appliances. If the
electrical circuit is overloaded with other
appliances, your appliance may not
function properly. Using in conjunction
with a power strip or extension cord is
not recommended.
SAVE THESE
INSTRUCTIONS

6
KNOW YOUR BREVILLE PRODUCT
A
B
H
J
I
C
D
E
F
G

7
KNOW YOUR BREVILLE PRODUCT
A. Measuring Cap
For measuring and adding ingredients
once mixing has started.
B. Jug Lid
With Breville Assist™ Ring-Pull Removal.
C. Dishwasher Safe Jug
Stainless steel jug with inner measurement
markings and pouring spout.
D. Power Base
Induction Heating Technology provides
gentle, even heat distribution.
E. START | STOP Push-Dial
Press the centre of the dial to start or
stop operation. Turn the dial to adjust
the temperature. ‘COLD STIR’ setting
stirs without heating.
F. LED Indicator
Button surround illuminates when power
is on; flashes when the frothing cycle is
activated; or will cease to illuminate in
standby mode.
G. Cord Wrap
H. ‘On Board’ Disc Storage
I. ‘Cappuccino’ Frothing Disc
For thick and creamy froth.
J. ‘Latte’ Frothing Disc
For smooth and silky milk.

8
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Before first use, remove and safely discard
all promotional labels and packing materials
attached to the Breville Milk Café™.
Wash the jug, lid and measuring cap in
warm soapy water and dry thoroughly. Wipe
exterior of appliance with a soft damp cloth
and dry thoroughly.
FROTHING HOT MILK
1. Place appliance on a flat level surface
and plug power cord into 230-240V
outlet and turn power On.
The START|STOP button surround will
illuminate to indicate the appliance is in
Standby mode.
2. Select the ‘Capp’ or ‘Latté’ frothing disc.
Choose ‘Capp’ disc for thick and creamy
froth or the ‘Latté’ disc for smooth and
silky milk.
WIDER DISC END FACES DOWN
CAPP LATTÉ
3. Insert the frothing disc onto the shaft at
the base of the milk jug. Ensure the disc
is inserted the correct way with the
wider part of the disc at the bottom of
the jug. The disc should ‘click’ securely
onto the shaft.
NOTE
Always ensure frothing disc is
inserted correctly before adding
liquid.
If the disc is not inserted correctly it
may dislodge during operation.
WARNING
Frothing disc is a choking hazard.
Children must always be supervised and
never left unattended with appliance.
4. Pour the required amount of cold fresh milk
into the jug and cover with jug lid. Always
use cold milk and fill the jug between the
MIN and MAX level markings.

9
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
NOTE
Never operate without the minimum
level of liquid in the milk jug. The milk
frother will automatically turn off if the
milk jug is empty. If this occurs, you
will need to wait for the milk frother
to cool down before re-use.
MIN MAX
NOTE
For optimum frothing results, do
not exceed the CAPP/LATTE MAX
(500ml) marking inside the jug.
5. Place the jug correctly onto the power
base, ensuring the jug is dry and clean.
6. Turn the START | STOP dial to the
desired temperature. When frothing
milk for a cappuccino or latte, we
recommend staying within the
‘OPTIMUM MILK TEMP’ range,
however this is up to your personal
preference.
If temperature setting is changed whilst
in operation, the appliance will stop at
the new temperature selected.
Press the START | STOP button once to
commence frothing the button surround will
start flashing to indicate the frothing cycle
has commenced.
NOTE
Do not remove jug during operation.
To stop operation at any time, press
the START | STOP button once.
7. When liquid has reached set
temperature, the appliance will stop
automatically. This will take anywhere
between 2 -7 minutes depending on the
quantity of milk used. Carefully remove
the jug from the power base as the jug
and contents will be hot. Always remove
the jug using the jug handle. Be careful
not to place the jug on a table, plastic
surface or heat sensitive surface which
may scorch or melt. Remove the jug lid
and pour the frothed milk.
8. Clean the milk jug and frothing disc
after use. Allow the milk jug and disc to
cool completely before disassembling.
WARNING
Surface of the jug will be hot during
and after operation. Do not place hot
jug on heat sensitive surfaces.
WARNING
Do not place hot jug onto power cord.

10
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
NOTE
The milk frother is not designed
to mix a large quantity of dry
ingredients or melt large food pieces
eg. cubed chocolate, ground nuts,
whole spices or fresh herbs.
The milk frother has been designed
specifically for the purpose of
foaming milk and other dairy milk
alternatives and is not intended to
whip, thicken or heat other food
substances eg. cream, custard, soup,
gravy etc.
USING THE ‘COLD STIR’ SETTING
The COLD STIR setting allows you to froth
cold milk or hot milk without additional
heat. The COLD STIR setting can be used
to froth milk for cold beverages such as
iced cappuccino; to blend in syrups and
flavourings for iced chocolate; or to stir in
instant drinking powders into milk.
The COLD STIR setting will operate for
60 seconds before automatically stopping.
ADDING INGREDIENTS
Always allow the milk frother to start for
a few seconds before using the measuring
cap to gradually add ingredients. If using
one of the heated settings, this will allow
the milk to warm up and help dissolve the
additional ingredients.
Always add ingredients slowly and in small
quantities. Adding ingredients too quickly
may cause the frothing disc to dislodge or
stop spinning.
Frothing results differ depending on the
ingredients used. For example, adding dense
ingredients like thick syrups, heavy powders
and large flakes can significantly reduce the
amount of foam.
COW
Full cream
low fat, skim
SOY
Full cream
& low fat
COW
Full cream
low fat, skim
SOY
Full cream
& low fat
RECIPES
SUITABLE
LIQUIDS
SUITABLE
INGREDIENTS
COLD
DRINKS ICED
CHOCOLATE ICED
COFFEE ICED MOCHA
COCOA
POWDER
HOT
DRINKS
TOPPINGS/
SYRUPS
POWDERS/
FLAKES
UHT
MILK
FRESH
MILK
HOT
CHOCOLATE
DRINKING
CHOCOLATE
GOAT /
SHEEP OAT/ RICE
CHOCOLATE
FLAKES
FLAT
WHITE CHAI LATTÉ
CHAI
TEA
CAPPUCCINO LATTÉ
SHEEP
ALMOND
GOAT
CHOCOLATE
COCOA
POWDER
MAPLE
MAPLEHONEY
PREPARATION GUIDE
The chart below provides suggested milks, ingredients and uses for the milk frother.

11
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
SAFETY FEATURES
Standby
After 30 seconds of non use the milk frother
will enter standby mode and the button
surround will cease to illuminate.
To re-activate the milk frother out of standby
mode, press the START | STOP button.
Boil Dry Protection
The milk frother will automatically cease
to operate if the jug overheats. This can
be caused if the jug is empty, if liquid is
below the MIN measurement marking, or
after consecutive uses. If this occurs, 3 alerts
will sound. Unplug the power cord from the
power outlet, wait approximately 5 minutes
for the milk frother to cool down or fill the
milk jug with water for faster cooling. Once
adequately cooled, you will be able to reactive
the milk frother and re-activate frothing.
Thermal Fuse Protection
This feature protects the milk frother in
case of major fault.
If this occurs, the milk frother will
automatically turn off and will not re-
activate. Immediately cease use and
remove from the power outlet.
For assistance contact Breville Customer
Service on:
Ph: 1300 139 798 (Australia) or
Ph: 0800 273 845 (New Zealand).

12
PAGE HEADER.....
CARE & CLEANING
The milk jug, frothing disc and heating
chamber should be cleaned after each use to
minimise milk residue build up.
1. Unplug the power cord from the power
outlet before cleaning.
2. The jug and the frothing disc will be hot
after use. Wait for jug and disc to cool
before rinsing in tap water.
3. Remove stainless steel jug from base.
4. Thoroughly clean the inner heating
chamber with a damp cloth removing
any milk residue.Inner heating chamber.
NOTE
Ensure there is no milk residue or
spillage on the key sensor components
in the heating chamber (a).
5. Remove milk frother attachment from
the milk jug base. Clean the milk frother
attachment and the milk jug thoroughly
in warm soapy water (If using an
alternative cleaning solution, please
follow the manufacturer’s instructions
accordingly).
6. Thoroughly clean the base of the milk
jug and ensure there is no milk residue
or any foreign object in the hole (centre
of the jug) as this will interrupt the
normal frothing operation.
NOTE
• Do not use alkaline or abrasive
cleaning agents, steel wool or
scouring pads as these can damage
the surface.
• Never immerse the power base
in water or any other liquid. The
underside of the jug must always be
dry before placing on power base
prior to use.
• The milk jug, jug lid, measuring cap
and frothing discs can be washed in
the dishwasher (top shelf only).
• However, to extend the life of the
frothing discs, re recommend they
are washed by hand.
a
a
a
Inner heating
chamber

13
HINTS & TIPS
HINTS & TIPS
• Always use cold, fresh (or freshly
opened) milk.
• Some milks produce more froth than
others. Experiment with different milk
options and frothing discs to achieve the
desired result.
• For optimum frothing results, do not
exceed the CAPP/LATTE MAX (500ml)
marking inside the jug.
• For best results, always start cycle and
warm milk first before adding ingredients.
• Remove excess air bubbles from frothed
milk by gently tapping jug on a bench.
• Swirl frothed milk in a circular motion
before pouring milk into a cup or glass.
• Pour frothed milk promptly to avoid
the milk from separating. Frothed milk
that is not used immediately should not
be reheated.
• Ensure jug and frothing disc are clean
before use.

14
PAGE HEADER.....
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Milk is not
foaming? • Milk is warm or too hot to foam. • Use cold, fresh milk.
• Do not re-foam already
heated milk.
• Try reducing milk volume
in jug.
• Ensure light is illuminated
and not flashing.
• Try a different milk. Some
milks produce more froth
than others. Experiment with
different milk options and
frothing discs to achieve the
desired result.
• Adding dense ingredients like
thick syrups, heavy powders
and large flakes can reduce
the amount of foam. This is
normal.
Milk is
not heating? • Ensure jug is correctly positioned onto the power
base.
• Press START/STOP button to
commence cycle.
• Increase temperature by
turning the START | STOP dial
to the right.
Frothing disc is
not moving or
is dislodged?
• Frothing disc is not
inserted correctly.
• Frothing disc has
dislodged during
operation.
• Ingredients have been
added too quickly.
• Stop operation.
• Remove liquid from jug.
• Insert disc firmly into jug.
• Refill jug with liquid.
• Add ingredients (if desired)
slowly and in small quantities.
Ingredients are
not melting? • Ingredients have been added before milk has
warmed up.
• Ingredients are too large.
• Allow the milk frother to stir
for a few seconds before
adding ingredients.
• Ensure ingredients are in
small pieces.
Milk is too cold/
too hot? • Adjust temperature dial to suit personal preference.
• Always operate unit between
MIN and MAX level markings
inside jug.
Emergency stop • To stop operation at any time,
press the START | STOP
button. Operation has stopped
once the button surround has
stopped flashing.

15
RECIPES
HOT CHOCOLATE
A heated beverage of shaved chocolate, melted chocolate or
cocoa powder blended with heated and foamed milk or water
and sugar.
CAPPUCCINO
Cappuccino is served very light and luke warm with 1⁄3
espresso to 1⁄3heated milk and a generous final third
of creamy froth. For added finesse, dust with powdered
chocolate.
CHAI LATTÉ
A chai latté is ¾ heated and foamed milk flavoured with
spiced tea concentrate including sugar and spices and topped
with ground nutmeg or cinnamon.
FLAT WHITE
A single dose of espresso in a cup topped with heated and
foamed milk, 1⁄3coffee and 1⁄3milk.
LATTÉ
Latté is a blend of 1⁄3espresso to 2⁄3milk is made with a single
shot of espresso. Top with heated and foamed milk, poured
down the inside rim of the glass to give a creamy consistency
and perfect layer of froth.
ICED COFFEE/ICED CHOCOLATE
A cold beverage of cold, foamed milk mixed with coffee and
topped with ice cream, whipped cream and chocolate shavings*.
* Substitute coffee with chocolate powder or topping to make
iced chocolate.

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2015.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
BMF600 Issue - F15
Australian Customers
Mail: Locked Bag 2000
Botany NSW 1455
AUSTRALIA
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163
Auckland NEW ZEALAND
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
Breville Customer Service Centre
www.breville.com.au
www.breville.co.nz