Breville vin227 User manual

2
product safety
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This product can be used by children aged 8 years and above, and persons
who require supervision, provided:
• they are familiar with the hazards associated with the product, and,
• they receive instruction by a competent person on how to safely use the
product.
Children must not play with the product. Cleaning and user maintenance
must not be done by children unless they are supervised.
Keep the appliance and its cord out of reach of children less than 8 years
old when it is switched on or cooling down.
The appliance must not be left unattended when it is connected to the
mains supply.
The appliance must be unplugged from the mains supply socket before
llingthewatertankwithwater.
Always use the appliance on a stable, secure, dry and level surface. When
placing the appliance on its stand, ensure that the surface on which the
stand is placed is stable.
Do not use the appliance if it has been dropped, if there are any visible
signs of damage or if it is leaking.
If the supply cord is damaged, it must be replaced by the manufacturer, its
serviceagentorsimilarlyqualiedpersonsinordertoavoidahazard.
!Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Do not touch the metal parts of the appliance during use as they may become very hot.
!This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!This appliance produces steam which can cause burns. Handle with care especially
when using the vertical steam feature. Never direct steam at persons or animals.
!Ensure the appliance is switched off and unplugged from the supply socket before
lling or emptying the water tank, after use and before cleaning.

3
before first use
Remove all packaging including any soleplate protection before operating your
steam generator.
Wipe over the soleplate with a soft cloth.
Position your steam generator iron horizontally on your ironing board (if it is large enough)
or on a heat resistant and secure surface at the same height as your ironing board.
Before connecting your steam generator to the mains supply, make sure your supply
voltage is the same as the one indicated on your steam generator.
When you rst use your steam generator, there may be a slight odour and it may smoke
slightly for the rst few minutes of operation. This is quite normal and will disappear.
When you rst use your steam generator, iron an old towel to ensure that any residues
inside the iron are not transferred to your laundry.

4
features
1. Steam lock button
2. Temperature indicator light
3. Steam trigger
4. Temperature control
5. Steam hose
6. Temperature control ring
7. Temperature control pointer
8. Stainless steel soleplate
9. Boiler rinse plug cover
10. Boiler rinse plug (underneath the rinse plug cover)
11. Iron rest
12. Low water indicator light
13. Steam indicator light
14. Steam control
15. On/off button
16. Water tank lling cover
17. Water tank
18. Water tank release button
19. Mains power cord storage strap
20. Mains power cord

5
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
wer tq
;
j
l
f
g
h
2)
k
u
y
o
a
s
d
S
T
E
A
M

6
filling your steam generator
Never add fabric conditioner, starches or any other chemicals to the water in
your steam generator. Use cold tap water only in your steam generator.
1. Remove the water tank by pressing the water tank release button underneath the
tank.
2. Slide the water tank out.
3. Open the water tank lling cover.
4. Fill the water tank with cold tap water to the MAX mark.
5. Close the water tank lling cover and slide the water tank back into the base unit until
it latches securely into place.
Note that when you use your steam generator for the rst time or after rinsing the boiler, a
lot of water will be pumped out of the water tank. Rell the tank as required.
Filling during use
You can ll your steam generator during use without having to remove the water tank.
The low water indicator light will ash to let you know that the water tank needs lling.
Simply open the water tank lling cover and add water as required. Do not ll past the
MAX indicator mark on the tank.

7
e
q
w
r
t
MAX

8
using your steam generator
We recommend that you:
• Start by ironing those items of laundry that require the lowest temperature (e.g.
synthetics). Finish by ironing fabrics which respond best to higher temperatures and
steam—such as cotton and linen.
• If you iron a fabric made of a blend of bres set the temperature of your iron to the
most delicate bre.
• When using starch, it should be sprayed onto the reverse side of the fabric and the
soleplate cleaned more frequently.
• Do not iron over sharp or hard objects such as buttons, studs or zippers as they will
scratch the soleplate of your iron.
Important
Your steam generator takes time to heat up and cool down. If you change the
temperature setting on your steam generator, you must give it time to adjust to the new
setting.
This is especially important when you change from a high setting to a lower one. It takes
your steam generator longer to cool down than it does to heat up and this is the reason
we recommend that you begin ironing at lower temperatures.
If you do need to reduce the temperature of your steam generator, wait until the
temperature indicator light comes on and then goes out again before ironing. This will
ensure that your steam generator has cooled to the lower temperature and is not too hot
for the fabric being ironed.
For example, you have been ironing using the lll setting and wish to change to the ll
setting:
1. Rotate the temperature control ring to set the pointer to the ll setting. Initially, the
temperature indicator light will be off because your steam generator is still at the
higher temperature.
2. Wait until the temperature indicator light comes on and then goes out again. Your
steam generator has now cooled to the correct temperature.

9
using your steam generator
Steam ironing
During steam ironing, if you do not allow your steam generator to reach the
selected temperature water may drip from the soleplate. During use the steam pipe
and iron rest will become very hot.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
When ironing cotton and linen, always select the highest temperature. Steam should
never be used on delicate fabrics like nylons, acrylics and synthetics.
1. Fill the water tank with water.
2. Plug your steam generator into the mains supply and press the on/off button to switch
your steam generator on.
3. Rotate the temperature control ring to set the pointer to between the ll and the
maximum heat (MAX) setting.
4. The temperature indicator light will light up as your steam generator heats up. When
the temperature indicator light goes out your steam generator is at the selected
temperature. The temperature indicator light will turn on and off during ironing as
your steam generator maintains the correct temperature.
5. You will hear a buzzing sound as the pump inside your steam generator operates and
transfers water from the water tank to the boiler where steam is produced. Set the
desired amount of steam as described below in the Adjusting the amount of steam
section. The steam indicator light will ash as your steam generator heats the water
to create steam. When the steam indicator light stops ashing, your steam generator
is ready to use. The steam indicator light will occasionally ash during ironing. This is
normal.
6. With the soleplate in contact with the garment, press the steam trigger for a couple of
seconds. It is not necessary to hold the trigger down continuously as steam will still
be emitted from the soleplate for a short time after the trigger has been released. If
more steam is required, press the steam trigger again.
Always release the trigger and allow any residual steam to be released before
replacing the iron on its stand.
The pump will occasionally start and stop during ironing. This is normal
Adjusting the amount of steam
1. You can adjust the amount of steam using the steam control.
2. Turn the steam control clockwise to increase steam, or anticlockwise to decrease
steam. Steam can be switched off by turning it fully anticlockwise to OFF.

10
Ironing without steam
If you intend to dry-iron fabrics there is no need to ll the water tank. However, if water is
already in the water tank, you do not need to empty it.
1. Rotate the temperature control ring to set the pointer to the desired heat setting.
2. Turn the steam control fully anticlockwise to OFF.
3. When the temperature indicator light goes out your steam generator is ready to use.
The light will continue to turn on and off during ironing as your steam generator
maintains the soleplate temperature.
4. Iron your laundry without pressing the steam trigger or using the steam lock button.
Vertical steam ironing
Vertical steam ironing is especially useful for ironing items such as curtains while they are
hanging, or jackets, suits and coats.
Hold the iron in a vertical position and press the steam trigger as required.
Steam lock
To prevent fatigue, your steam generator can be set to produce steam without having to
constantly hold the steam trigger in the on position.
1. Slide the steam lock button forwards and steam will be continuously emitted from the
soleplate.
2. To stop, slide the steam lock button backwards. Always release the steam lock button
when you put the iron back onto the iron rest.
using your steam generator
qw

11
troubleshooting
Problem Possible cause Solution
My steam generator
doesn’t heat up.
Your steam generator is not
connected properly.
Check the mains power cord,
plug and wall socket.
Your steam generator is not
switched on.
Press the on/off switch to
switch your steam generator
on.
The temperaure is set to
MIN.
Set the temperature to the
required temperature.
My steam generator
does not produce any
steam.
There is not enough water in
the water tank.
Fill the water tank as
required.
Your steam generator’s
boiler is still heating up.
Wait until the steam indicator
light stops ashing and goes
out.
The selected temperature is
too low for steam ironing.
Set the temperature to ll or
higher.
The water tank is not tted
correctly.
Check that the water tank is
correctly tted.
The steam may not be
visible if your steam
generator is set to a high
ironing temperature.
Set your steam generator to
a lower temperature (e.g. ll)
to check if steam is being
produced.
Water droplets come out
of the soleplate.
The selected temperature is
too low for steam ironing.
Set the temperature to ll or
higher.
If you have left your steam
generator for some time
between ironing, steam
left in the steam hose can
cool down and cause water
dropets to form.
This is normal. Hold your iron
over an old cloth and press
the steam trigger until steam
rather than water droplets
come from the soleplate.
My steam generator
occasionally makes a
strange sound.
This is the internal pump
transferring water from the
water tank as required.
This is normal.
Dirty water comes out of
the soleplate.
Scale and other impurities
have accumulated inside
the boiler of your steam
generator.
Allow your steam generator
to fully cool down then rinse
the boiler—see care and
cleaning on page 16.

12
Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior
of your steam generator because they will damage the surface.
After each use
After each use, allow your steam generator to completely cool down before wiping
the soleplate with a soft damp cloth. If polyester has burnt to the soleplate, iron a
damp cotton cloth while your steam generator is still hot. If necessary, allow your
steam generator to completely cool down then wipe over the soleplate with a soft cloth
moistened with methylated spirits. Remove the methylated spirit with a damp cloth. Make
sure that the soleplate is completely dry.
To clean the exterior of your steam generator, wipe over with a soft damp cloth and wipe
dry. Ensure the soleplate is dry.
To remove build-up from the steam holes which may affect steam performance, use a
cotton wool tip moistened in methylated spirits. Wipe over with a damp cloth.
Rinsing out the boiler
NEVER remove the boiler rinse plug when your steam generator is hot. Allow
your steam generator to cool for at least 2 hours before removing the boiler rinse
plug.
To maintain optimum performance, it is important to rinse out the boiler in your steam
generator once a month or after every 10 times you have used it.
Unplug your steam generator and allow it to cool for at least 2 hours. Remove the water
tank.
1. Remove the iron from the iron rest and place it to one side. Shake the base unit for a
few seconds.
2. Remove the boiler rinse plug cover by pulling it away from the base unit.
3. Use a coin to unscrew the boiler rinse plug.
4. Place the base unit on its side and and pour about 300ml (approx. equal to 1 coffee
mug) of cold tap water into the opening.
5. Shake the base unit again for a few seconds to agitate the water in the boiler.
6. Pour out the water into a sink.
7. Repeat steps 4, 5 and 6 again.
8. Ret the boiler rinse plug and tighten it rmly using a coin.
9. Ret the boiler rinse plug cover.
care and cleaning

13

14
Storing your iron
• Switch the mains supply socket off and remove the plug. Allow your steam generator
to completely cool down.
• Empty any remaining water from the water tank.
• Wrap the steam hose around the channel in the base unit as shown.
• Use the mains cord storage strap to secure the mains cord as shown.
storage

15
This appliance must be earthed.
This appliance is tted with either a moulded or rewirable BS1363, 13 amp plug. The fuse
should be rated at 13 amps and be ASTA approved to BS1362.
If the fuse in a moulded plug needs to be changed, the fuse cover must be retted. The
appliance must not be used without the fuse cover tted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug tted as detailed below. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
The wires of the mains lead are coloured in accordance with the following code:
GREEN/YELLOW = EARTH BLUE = NEUTRAL BROWN = LIVE
The wire which is coloured GREEN/YELLOW must be connected to the terminal in
your plug which is marked with an E or by the earth symbol ( ) or coloured GREEN or
GREEN /YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your plug which
is marked with the letter L or coloured RED.
If any other plug is used, a 13 amp fuse must be tted either in the plug or adaptor or at
the distributor board.
Plug should be BS1363 approved
Fit a 13 Amp Fuse
Ensure that the outer sheath of the cable
is rmly held by the clamp
BROWN
(Live)
13 Amp
Fuse
BLUE
(Neutral)
GREEN/YELLOW
(Earth)
connection to the mains supply

16
after sales service
These appliances are built to the very highest of standards. There are no user serviceable
parts. Follow these steps if the unit fails to operate:
1. Check the instructions have been followed correctly.
2. Check that the fuse has not blown.
3. Check that the mains supply is functional.
If the appliance will still not operate, return the appliance to the place it was purchased for
a replacement. To return the appliance to the Customer Service Department, follow the
steps below:
1. Pack it carefully (preferably in the original carton). Ensure the unit is clean.
2. Enclose your name and address and quote the model number on all correspondence.
3. Give the reason why you are returning it.
4. If within the guarantee period, state when and where it was purchased and include
proof of purchase (e.g. till receipt).
5. Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road
Royton
Oldham
OL2 5LN, UK.
Telephone: [phone] Fax: [phone]
e-mail: [email protected]

17
guarantee
Please keep your receipt as this will be required for any claims under this guarantee.
This appliance is guaranteed for 1 year after your purchase as described in this
document.
During this guaranteed period, if in the unlikely event the appliance no longer functions
due to a design or manufacturing fault, please take it back to the place of purchase, with
your till receipt and a copy of this guarantee.
The rights and benets under this guarantee are additional to your statutory rights, which
are not affected by this guarantee. Only Jarden Consumer Solutions (Europe) Limited.
(“JCS (Europe)”) has the right to change these terms.
JCS (Europe) undertakes within the guarantee period to repair or replace the appliance,
or any part of appliance found to be not working properly free of charge provided that:
• you promptly notify the place of purchase or JCS (Europe) of the problem; and
• the appliance has not been altered in any way or subjected to damage, misuse,
abuse, repair or alteration by a person other than a person authorised by JCS
(Europe).
Faults that occur through, improper use, damage, abuse, use with incorrect voltage, acts
of nature, events beyond the control of JCS (Europe), repair or alteration by a person
other than a person authorised by JCS (Europe) or failure to follow instructions for use
are not covered by this guarantee. Additionally, normal wear and tear, including, but not
limited to, minor discoloration and scratches are not covered by this guarantee.
The rights under this guarantee shall only apply to the original purchaser and shall not
extend to commercial or communal use.
If your appliance includes a country-specic guarantee or warranty insert please refer
to the terms and conditions of such guarantee or warranty in place of this guarantee or
contact your local authorized dealer for more information.
Waste electrical products should not be disposed of with Household waste. Please
recycle where facilities exist. E-mail us at [email protected] for further recycling and
WEEE information.
Jarden Consumer Solutions (Europe) Limited.
Middleton Road
Royton
Oldham
OL2 5LN
UK

18

19

VIN227_VIN262_Iss_5 10/13 93373-4