Bristan W BASIN08 C User manual

Fitting Instructions & Contents List
Fitting Instructions & Contents ListFitting Instructions & Contents List
Fitting Instructions & Contents List
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts
Round Push Button
Round Push ButtonRound Push Button
Round Push Button

Contents
Contents Contents
Contents Page
PagePage
Page
1. Introduction 01
2. Safety Note 01
3. Specification 01
4. Installations
Clicker waste (slotted) 02
Clicker waste (unslotted) 03
5. Cleanin & Maintenance 04
6. Bristan Guarantee 05

1. Introduction
1. Introduction1. Introduction
1. Introduction
Thank you for choosin Bristan, the UK’s leadin taps and showers expert. We have desi ned this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fittin
instructions have been created to ive you all of the information you need and, if you need any further help, please
do not hesitate to ive us a call on 0844 701 6273.
2. afety Note
2. afety Note2. afety Note
2. afety Note
Please read these instruction thorou hly and retain for future use. All products manufactured and supplied by
Bristan are safe provided they are installed correctly, used correctly add receive re ular maintenance in
accordance with these instructions.
01
3. pecification
3. pecification3. pecification
3. pecification
Desi ned to comply with BS EN 274-1:2002 Waste fittin s for sanitary appliances.

02
4. installation
4. installation 4. installation
4. installation –
––
– W BASIN08 C (slotted)
W BASIN08 C (slotted)W BASIN08 C (slotted)
W BASIN08 C (slotted)
1. Identify all components are present prior to instillation.
2. Fit the waste body (1) & rubber washer (2) into the basin.
3. Use the pure silicon sealant where necessary. Place shaped rubber washer (3)
under the basin & secure waste by ti htenin backnut (4) as shown on the
dia ram below.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release water, press the button a ain.
5. Check all joints & connections for leaks
6. See pa e 04 for aftercare instructions
Parts contents list
Parts contents listParts contents list
Parts contents list
1. Waste body
2. Rubber washer
3. Shaped rubber washer
4. Backnut

03
installation continued
installation continued installation continued
installation continued –
––
– W BASIN09 C (unslotted)
W BASIN09 C (unslotted)W BASIN09 C (unslotted)
W BASIN09 C (unslotted)
1. Identify all components are present prior to instillation.
2. Fit the waste body (1) & rubber washer (2) into the basin.
3. Use a pure silicon sealant where necessary. Secure waste by ti htenin backnut
(3) as shown on the dia ram.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release water, press button a ain.
5. Check all joints & connections for leaks.
6. See pa e 04 for aftercare instructions.
IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT
Due to the desi n of this waste & the type of basins it is suitable for e. an
overflow less lass basin. It is imperative that any water fittin s are turned
off before the basin is allowed to overfill.
Parts contents list
Parts contents listParts contents list
Parts contents list
1. Waste Body
2. Rubber Washer
3. Backnut

04
5. Cleaning & Maintenance
5. Cleaning & Maintenance5. Cleaning & Maintenance
5. Cleaning & Maintenance
Your fittin has a hi h quality finish and should be treated with care to preserve the visible surfaces.
All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp
cloth. Stains can be removed usin washin up liquid. All bathroom cleanin product (powders and liquids) will
dama e the surface of your fittin , even the non-scratch cleaners.
NOTE:- Never use abrasive deter ents or disinfectants or those containin alcohol, hydrochloric or phosphoric
acid.
Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products.
Using just water, E-cloth gives a smear free, deep clean by breaking up and
holding dirt, which normal cloths leave behind. Order through your Bristan
stockist.
(ORDER CODE: ECLOTH)

Bristan Guarantee
Bristan GuaranteeBristan Guarantee
Bristan Guarantee
2 year
2 year 2 year
2 year -
--
- Pumps, Power Showers
Pumps, Power ShowersPumps, Power Showers
Pumps, Power Showers
2 year parts. 1 year labour (subject to re istration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour (subject to re istration).
5 year
5 year 5 year
5 year - Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour (subject to proof of purchase).
Shower Valves
Shower ValvesShower Valves
Shower Valves
5 year parts. 5 year labour (subject to re istration), else 1 year with proof of purchase.
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathrooms accessories, shower accessories (e. . hoses, handsets and
poles), wastes, WC levers and li ht pulls.
10 year
10 year 10 year
10 year - Shower enclosures, Shower Trays, Sanitary Ware & Furniture
Shower enclosures, Shower Trays, Sanitary Ware & FurnitureShower enclosures, Shower Trays, Sanitary Ware & Furniture
Shower enclosures, Shower Trays, Sanitary Ware & Furniture
10 year parts (subject to re istration), else 2 years with proof of purchase. 1 year labour (subject
to re istration), else 1 year with proof of purchase.
This uarantee applies to products purchased within the United Kin dom or Republic of Ireland, but does not apply
to products used commercially.
The uarantee is only available to ori inal purchasers who have proof of purchase.
The installation must allow ready access to all products for the purpose of inspection, maintenance or
replacement.
Any part found to be defective durin the above uarantee period will be replaced without char e, providin that the
product has been installed in accordance with the instructions, used as intended, and re ularly serviced.
Servicin should be carried out at re ular intervals of no more than 12 months and more frequently in hard water
areas (heavy lime scale) areas.
In the unlikely event that any problems are encountered with the product’s performance on installation, you must
obtain uidance/authorisation from our Customer Service Department, and be able to supply proof and date of
purchase, before any remedial action is taken.
The uarantee excludes eneral wear and tear and dama e caused by accident, misuse or ne lect, and does not
cover the followin :
Components that are subject to eneral wear and tear such as filters, seals, ‘O’ rin s and washers etc.
· Dama e caused by faulty installation
· Dama e caused by lime scale or any waterborne debris
· Dama e caused by inappropriate cleanin products (see user instructions)
· Dama e caused by the use of non-Bristan parts
· The product bein used for a purpose other than intended by the manufacturer.
In the interests of continuous product improvement Bristan reserves the ri ht to alter specification as necessary.
05

This booklet covers all product codes
W BA IN08 C - Chrome
W BA IN09 C - Chrome
Helpline
HelplineHelpline
Helpline
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, taffordshire B78 1 G
A Masco Company
Website: www.bristan.com
Telephone: [phone] Facsimile: 0844 701 6275
Email: [e-mail]
FI (PU H BUTTON) REV. D1