Burkert 3323 User manual

Operating instructions
Type 3323, 3324, 3325
AE3363
Electromotive diaphragm valve

We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modifications techniques.
© 2016 – 2019 Bürkert Werke GmbH & Co. KG
Operating Instructions 1910/03_EN-en_00810538 / Original DE

3
Contents
1THE OPERATING INSTRUCTIONS ........................................................................................................7
1.1 Symbols........................................................................................................................................7
1.2 Denitionsofterms......................................................................................................................7
2INTENDED USE ......................................................................................................................................8
3BASIC SAFETY INSTRUCTIONS ...........................................................................................................9
4GENERAL INFORMATION....................................................................................................................11
4.1 Contactaddress.........................................................................................................................11
4.2 Warranty .....................................................................................................................................11
4.3 InformationontheInternet........................................................................................................ 11
5PRODUCT DESCRIPTION....................................................................................................................12
5.1 Generaldescription....................................................................................................................12
5.2 Properties ...................................................................................................................................12
5.3 Variants.......................................................................................................................................13
5.4 Options .......................................................................................................................................13
6STRUCTURE AND FUNCTION.............................................................................................................14
6.1 Structureoftheelectromotivediaphragmvalve ......................................................................14
6.2 Valvepositionafterfailureofthesupplyvoltage......................................................................16
6.3 Safetyposition ...........................................................................................................................16
6.4 Displayofthedevicestatus ......................................................................................................17
6.5 Factorysettings.........................................................................................................................19
7ELECTRICAL CONTROL ......................................................................................................................20
7.1 Function......................................................................................................................................20
7.2 SAFEPOSenergy-pack(option) ................................................................................................22
8TECHNICAL DATA ................................................................................................................................23
8.1 Conformity..................................................................................................................................23
8.2 Standards ...................................................................................................................................23
Electromotive diaphragm valve
Type 3323, 3324, 3325
english

4
Type 3323, 3324, 3325
8.3 Licenses .....................................................................................................................................23
8.4 Typelabel ...................................................................................................................................23
8.5 Labellingoftheforgedsteelvalvebodies ................................................................................24
8.6 Labellingofthetubevalvebodies(VP).....................................................................................24
8.7 Operatingconditions .................................................................................................................25
8.8 Generaltechnicaldata...............................................................................................................28
8.9 Electricaldata ............................................................................................................................28
8.10 FlowvaluesforforgedsteelvalvebodiesVS...........................................................................31
8.11 Flowvaluesforcastvalvebodiesandplasticvalvebodies ....................................................32
8.12 Flowvaluesfortubevalvebodies.............................................................................................33
9INSTALLATION OF THE VALVE ............................................................................................................34
9.1 Safetyinstructionsforinstallation.............................................................................................34
9.2 Installationpositionofthediaphragmvalves...........................................................................34
9.3 Installationofdeviceswiththreadedsocketconnection,angeconnection,
clampconnectionorbondconnection .............................................................................................. 37
9.4 Installationofdeviceswithweldedconnection .......................................................................39
9.5 Mountingactuatoronvalvebody .............................................................................................42
9.6 Rotatingtheactuator.................................................................................................................46
9.7 Removingtheactuator ..............................................................................................................47
9.8 Holdingdevice ...........................................................................................................................49
10 ELECTRICAL INSTALLATION...............................................................................................................50
10.1 Electricalinstallationwithcircularplug-inconnector .................................................................. 50
10.2 ElectricalconnectionbüS/CANopen.........................................................................................52
10.3 Electricalconnectioneldbusgateway ....................................................................................53
10.4 Electricalinstallationwithcablegland......................................................................................54
11 START-UP .............................................................................................................................................60
11.1 Basicsettings.............................................................................................................................60
11.2 Settingsafetypositionandeectivedirection .........................................................................60
11.3 Adjustingthepositioncontrol-runningM.Q0.TUNE...............................................................61
11.4 SettingAUTOMATICoperatingstate.........................................................................................63
english

5
Type 3323, 3324, 3325
12 OPERATION..........................................................................................................................................64
12.1 Overview:Availabilityoftheoperatingelements......................................................................64
12.2 Displayelements .................................................................................................................................. 65
12.3 Controlelements........................................................................................................................66
12.4 büSserviceinterface .................................................................................................................67
12.5 AcceptingandsavingSIMcarddata(option) ................................................................................... 68
12.6 UserinterfaceoftheBürkertCommunicatorPCsoftware............................................................... 69
12.7 EstablishingaconnectionbetweenthedeviceandBürkertCommunicator..........................70
13 BASIC FUNCTIONS..............................................................................................................................71
13.1 Switchingoperatingstate,AUTOMATIC–MANUAL ................................................................71
13.2 Settingsafetypositionandeectivedirection .........................................................................72
14 EXTENDED FUNCTIONS ................................................................................................................................ 73
14.1 X.TIME–Limitingthecontrolspeed .........................................................................................73
14.2 X.LIMIT–Limitingthemechanicalstrokerange ...................................................................... 75
14.3 SettingLEDmode ......................................................................................................................76
14.4 Settingthecoloursforindicatingthevalveposition................................................................77
15 MANUAL ACTUATION OF THE VALVE.................................................................................................78
15.1 Actuatingvalveelectrically........................................................................................................78
15.2 Actuatingvalvemechanically....................................................................................................80
16 OPERATINGSTRUCTURE/FACTORYSETTING................................................................................84
16.1 Operatingstructureofthecongurationarea ..........................................................................84
17 INDUSTRIAL ETHERNET .....................................................................................................................91
17.1 Descriptioneldbusgateway....................................................................................................91
17.2 TechnicaldataIndustrialEthernet.............................................................................................93
17.3 Designingviaeldbus................................................................................................................ 94
17.4 Webserver .................................................................................................................................96
18 CANopen ..............................................................................................................................................99
18.1 Designingviaeldbus................................................................................................................ 99
18.2 CANopennetworkconguration ...............................................................................................99
english

6
Type 3323, 3324, 3325
19 büS......................................................................................................................................................100
19.1 CablingofbüSnetworks .........................................................................................................100
19.2 CongurationofbüSnetworks................................................................................................100
20 MAINTENANCE,TROUBLESHOOTING.............................................................................................101
20.1 Visualinspection ......................................................................................................................101
20.2 Replacingthediaphragm ........................................................................................................102
20.3 ReplacingtheSAFEPOSenergypack ....................................................................................108
20.4 Maintenancemessages...........................................................................................................119
21 TROUBLESHOOTING AND MESSAGES ...........................................................................................120
21.1 Errormessages ........................................................................................................................120
21.2 Messagesfordevicestatus“Outofspecication”................................................................ 122
21.3 Messagesfordevicestatus“Functioncheck” .......................................................................123
22 CLEANING ..........................................................................................................................................124
22.1 Flushingthevalvebody...........................................................................................................124
23 ACCESSORIES,SPAREPARTS.........................................................................................................125
23.1 Accessories..............................................................................................................................125
23.2 Spareparts...............................................................................................................................126
24 DISASSEMBLY ...................................................................................................................................127
25 PACKAGING,TRANSPORT................................................................................................................128
26 STORAGE ...........................................................................................................................................128
27 DISPOSAL ..........................................................................................................................................129
english

7
The operating instructions
Type 3323, 3324, 3325
1 THE OPERATING INSTRUCTIONS
The operating instructions describe the entire life cycle of the device. Keep these instructions in a location
which is easily accessible to every user and make these instructions available to every new owner of the device.
Importantsafetyinformation.
Read the operating instructions carefully and thoroughly. Study in particular the chapters entitled Basic
Safety Instructions and Intended Use.
▶The operating instructions must be read and understood.
1.1 Symbols
DANGER!
Warnsofanimmediatedanger!
▶Failure to observe the warning will result in fatal or serious injuries.
WARNING!
Warnsofapotentiallydangeroussituation!
▶Failure to observe the warning may result in serious injuries or death.
CAUTION!
Warnsofapossibledanger!
▶Failure to observe this warning may result in a moderate or minor injury.
ATTENTION!
Warnsofdamagetoproperty.
•Failure to observe the warning may result in damage to the device or other equipment.
Indicates important additional information, tips and recommendations.
Refers to information in these operating instructions or in other documentation.
▶designates instructions for risk prevention.
→designates a procedure which you must carry out.
Indicates a result.
MENUE Representation of software interface text.
1.2 Denitions of terms
•The term “device” used in these instructions applies to the electromotive diaphragm valve of Types 3323,
3324, 3325 and AE3363.
•In these instructions, the abbreviation “Ex” stands for “explosion-risk”.
•The term “büS” (Bürkert system bus) used in this manual stands for the communication bus developed by
Bürkert, based on the CANopen protocol.
english

8
Intended use
Type 3323, 3324, 3325
2 INTENDED USE
Non-authorizeduseoftheelectromotivediaphragmvalveofTypes3323,3324and3325maybea
hazardtopeople,nearbyequipmentandtheenvironment.
TheelectromotivediaphragmvalveofTypes3323,3324and3325isdesignedtocontroltheowof
liquidandgaseousmedia.
▶Standard model devices must not be used in the potentially hazardous area. They do not have a sepa-
rate Ex type label which indicates approval for the explosion-proof area.
▶Do not use alkaline cleaning agents to clean the surface of the device.
▶If the valve position is relevant as regards safety in the event of a power failure: Use only those devices
which have the SAFEPOS energy-pack (optional energy pack).
▶Use according to the authorized data, operating conditions, and conditions of use specied in the con-
tract documents and operating instructions.
▶Protect the device against harmful environmental inuences (e.g. radiation, air humidity, vapors, etc.)! If
in doubt, consult the relevant sales company.
Usethedevice
▶only in conjunction with third-party devices and components recommended and authorized by Bürkert.
▶only when in perfect condition and always ensure proper storage, transportation, installation and
operation.
▶only as intended.
english

9
Basic safety instructions
Type 3323, 3324, 3325
3 BASIC SAFETY INSTRUCTIONS
These safety instructions do not consider any contingencies or incidents which occur during installation,
operation and maintenance.
The operator is responsible for observing the location-specic safety regulations, also with reference to the
personnel.
Riskofinjuryfromhighpressure.
▶Before working on the system or device, switch o the pressure and vent or drain lines.
Dangerofburnsandriskofre.
Following an extended duty cycle or as a result of a hot medium, the surface of the device may become hot.
▶Only touch the device when wearing protective gloves.
▶Keep the device away from highly ammable substances and media.
Riskofcrushingduetomechanicallymovingparts.
▶Perform installation work on the pendulum disc, diaphragm and valve body only when they have been iso-
lated from the power supply. Devices with SAFEPOS energy-pack: Completely drain SAFEPOS energy-pack.
Wait until LED illuminated ring goes out; the LED status must not be in LEDo mode.
▶Keep clear of the openings in the valve body.
Dangerduetoanuncontrolledprocessintheeventofapowerfailure.
If devices do not have the optional SAFEPOSenergy-pack, the valve remains in an undened position in the
event of a power failure.
▶If the valve position is relevant as regards safety in the event of a power failure: Use only those devices
which have the SAFEPOS energy-pack (optional energy pack).
▶Using DIP switches, select a valve position which is safe for the process.
Dangerduetoloudnoises.
▶Depending on the operating conditions, the device may generate loud noises. More detailed information on the
likelihood of loud noises is available from the relevant sales oce.
▶Wear hearing protection when in the vicinity of the device.
Leakingmediumwhenthediaphragmisworn.
▶Regularly check relief bore for leaking medium.
▶If medium is leaking out of the relief bore, change the diaphragm.
▶If the media is hazardous, protect the area surrounding the discharge point against dangers.
Generalhazardoussituations.
To prevent injuries:
▶In a hazardous area, the device may be used only in accordance with the specication on the separate
Ex type label.
▶To use the device in an explosion-risk area, observe the additional information with safety instructions for
the explosion-risk area enclosed with the device or the separate explosion-risk operating instructions.
english

10
Basic safety instructions
Type 3323, 3324, 3325
▶Devices without a separate Ex type label may not be used in a potentially explosive area.
▶Only feed in the media types specied in chapter “8 Technical data” to the media connections.
▶Do not make any internal or external changes on the device and do not subject it to mechanical stress.
▶Secure the system from unintentional actuation.
▶Note the system-specic safety regulations.
▶Only trained technicians may perform installation and maintenance work.
▶Transport, install and dismantle a heavy device with the help of another person and with appropriate
tools.
▶After an interruption, ensure that the process is restarted in a controlled manner. Observe sequence.
1. Apply supply voltage.
2. Charge the device with medium.
▶Observe the general rules of technology.
▶The valves must be installed in accordance with the regulations applicable in the country.
ATTENTION!
Electrostaticsensitivecomponentsandmodules.
The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects are hazardous to these components. In the worst case
scenario, they will be destroyed immediately or will fail after starting up.
•Observe the requirements in accordance with EN 61340-5-1 to minimize or avoid the possibility of
damage caused by sudden electrostatic discharge!
•Do not touch electronic components while the supply voltage is switched on!
english

11
General information
Type 3323, 3324, 3325
4 GENERAL INFORMATION
4.1 Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelngen
Germany
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
Email: [email protected]
International
Contact addresses can be found on the nal pages of the printed operating instructions.
And also on the Internet at:
www.burkert.com
4.2 Warranty
The warranty is only valid if the device is used as intended in accordance with the specied application
conditions.
4.3 Information on the Internet
Operating instructions and data sheets for Types 3323, 3324 and 3325 can be found on the Internet at:
www.buerkert.com
english

12
Product description
Type 3323, 3324, 3325
5 PRODUCT DESCRIPTION
5.1 General description
The electromotive diaphragm valve Type3323, 3324 and 3325 is suitable for the control of ow rate of liquid
and gaseous media. These can be neutral, ultra-pure, sterile as well as contaminated, aggressive or abrasive
media of high to low viscosity.
The diaphragm valve has an electromotive linear actuator with the electronic control system which is actuated
either via binary signals or via a eldbus (digital). The electromotive linear actuator has been designed in such
a way that it has an optimum degree of eciency. At the same time the actuator keeps the valve tight in a
de-energised state even at the maximum specied medium pressure.
Optionally there is the energy pack (SAFEPOS energy-pack) for the device. If the supply voltage fails, the
energy pack supplies the actuator with the required energy to move the valve into the required position which
can be adjusted in the menu.
The valve position can be manually changed in 2ways.
1. Electrical manual control: is used when supply voltage applied.
2. Mechanical manual control: may only be used if no supply voltage applied.
The device can be operated with 2 capacitive buttons and 4 DIP switches. There is also the option of setting
the device via the büS service interface and by using the PC software „Bürkert Communicator“. To make the
setting using the „Bürkert Communicator“, the USB-büS-interface set, available as an accessory, is required.
5.2 Properties
•Medium hermetically separated from the actuator by the diaphragm.
•Any ow direction.
•Self-draining in appropriate installation. The ends of the utilised connections must be cylindrical.
•Minimum dead space.
•High ow values and low-turbulence ow through the stream-lined valve body.
•Simple and fast replacement of the diaphragm. PTFE/EPDM diaphragms can be replaced with EPDM
diaphragms.
•Mechanical position indicator which shows the valve position even if the supply voltage fails.
•360° LED illuminated ring for displaying the device statuses, valve end positions and operating state.
•To keep the valve position, no electrical energy is required even at maximum medium pressure, except for
the basic consumption for actuation.
•Valve actuator can be rotated through 360°.
•Integrated control.
•Non-contact, high-resolution and wear-free position sensor.
The actuator housing consists of a robust and heat-dissipating aluminium body. The coating is resistant to
the usual cleaning agents. The plastic materials used for the actuator housing are also resistant to cleaning
agents.
english

13
Product description
Type 3323, 3324, 3325
5.3 Variants
The following variants are described in these instructions:
•Type 3323: 2-way body
•Type 3324: T-body
•Type 3325: tank bottom body
5.4 Options
•Energy pack (SAFEPOS energy-pack) for approaching the safety position.
The safety position, which the valve is to occupy if the supply voltage fails, is specied with the Dip
switch.
•SIM card for saving and transferring device-specic values and settings.
english

14
Structure and function
Type 3323, 3324, 3325
6 STRUCTURE AND FUNCTION
The electromotive diaphragm valve consists of an electromotively driven linear actuator, diaphragm and a
diaphragm valve body.
The electronic control and the “SAFEPOS energy-pack” are housed in the side of the linear actuator.
The electronic control consists of the microprocessor-controlled electronics and the position sensor.
The electronic control system for position control or process control are controlled either via standard signals
(analogue) or via a eldbus (digital).
The electromotive diaphragm valve is designed using three-wire technology. Operation is on standard devices
with 2 buttons and 4 DIP switches.
The electromotive linear actuator consists of a brushless direct current motor, gears and a threaded spindle.
The valve spindle, which is connected to the threaded spindle, transfers the force to the control cone and
diaphragm.
•The linear actuator is designed in such a way that it does not require electrical energy to keep the valve
position, i.e. when it is at a standstill, only the electronic control consumes energy.
Portconnections:
Welded connection, socket connection, anged connection, clamp connection, bonded connection.
(Connection sizes on request).
6.1 Structure of the electromotive diaphragm valve
6.1.1 2-way valve
Dummy cover or display with
illuminated display and bayonet
catch
Actuator housing
Actuator cove
Transparent window with
position indicator
Electrical connections
(circular plug-in connector or
cable gland)
Diaphragm socket
Actuator base
2 Relief bores
FE functional ground
Pressure compensation element
Do not unscrew!
Port connection
Valve body Diaphragm
Figure 1: Structure, electromotive diaphragm valve with 2-way body, Type 3323
english

15
Structure and function
Type 3323, 3324, 3325
6.1.2 T-body
Dummy cover or display with
illuminated display and bayonet
catch
Actuator housing
Actuator cove
Transparent window with
position indicator
Diaphragm socket
Actuator base
Port connection
Valve body
Diaphragm
2 Relief bores
Figure 2: Structure, electromotive diaphragm valve with T-body, Type 3324
6.1.3 Tank bottom valve
Dummy cover or
display with illumi-
nated display and
bayonet catch
Actuator housing
Actuator cover
Transparent window with
position indicator
Diaphragm socket
Actuator base
Valve body
Diaphragm
Electrical connections
(circular plug-in connector or cable gland)
Figure 3: Structure, electromotive diaphragm valve with tank bottom body, Type 3325
english

16
Structure and function
Type 3323, 3324, 3325
6.2 Valve position after failure of the supply voltage
ValvepositionwhenusingdeviceswithouttheSAFEPOSenergy-pack:
If the electromotive actuator is at a standstill due to failure of the supply voltage, the valve remains in the last
occupied position.
If the supply voltage fails while the actuator is changing the valve position, the valve stops in an undened
position. The actuator ywheel mass and the medium pressure continue to aect the valve spindle until it
nally comes to a standstill.
ValvepositionwhenusingdeviceswiththeSAFEPOSenergy-pack:
The valve occupies the safety position dened in the SAFEPOS menu.
Description of the SAFEPOS energy-pack see chapter “7.2 SAFEPOS energy-pack (option)”, page 22
6.3 Safety position
The DIP switch denes the safety position which the valve occupies in the following cases:
•Internal error
•Failure of the supply voltage (optional)
This function is available only on devices which have the optionally available SAFEPOS energy-pack.
ThefollowingsafetypositionsareselectedforSAFEPOS:
•Close = Valve closed
•Open = Valve open
•Inactive = Valve stops in an undened position if the supply voltage fails.
english

17
Structure and function
Type 3323, 3324, 3325
6.4 Display of the device status
The device status is indicated at the LED illuminated ring. To indicate the device status and the valve
position, dierent LED modes can be set:
•Valve mode
•Valve mode + warnings (mode set in the factory)
•NAMUR mode
*The description for setting the LED mode can be found in chapter “14.3 Setting LED mode”
6.4.1 Valve mode
The valve position and the device status “Failure” are indicated in the valve mode.
Messages for device status "Out of specication", "Maintenance required", and "Function check"
are not displayed in valve mode.
The factory default colors for indicating the open and closed valve positions can be changed.
The description can be found in chapter “14.4 Setting the colours for indicating the valve position”.
Displaysinvalvemode:
When device status “Normal”: Permanently lit in the colour of the valve position.
When device status “Failure”: Flashes alternately red and in the colour of the valve position.
Valveposition Colorforvalveposition Colorfordevicestatus"Failure"
Open yellow red
Inbetween white
Closed green
Table 1: Display of device status in valve mode
6.4.2 Valve mode + warnings
The valve position as well as the device status „Failure“, „Out of specication“, „Maintenance required“, and
„Function check“ are displayed in this mode.
If several device statuses exist simultaneously, the device status with the highest priority is displayed. The
priority is determined by the severity of the deviation from standard operation (red = failure = highest priority).
Displaysinvalvemode+warnings:
When device status „Normal“: Permanently lit in the colour of the valve position.
If device status deviates from „Normal“: The colours for valve position and device status ash alternately.
Valveposition Colorforvalve
position
Colorfordevicestatus
Failure Outof
specication
Maintenance
required
Functioncheck
Open yellow red yellow blue orange
Inbetween white
Closed green
Table 2: Display of device status in valve mode + warnings
english

18
Structure and function
Type 3323, 3324, 3325
6.4.3 NAMUR mode
In NAMUR mode, the LED illuminated ring lights up according to NAMUR NE 107, in the colour specied for
the device status.
If several device statuses exist simultaneously, the device status with the highest priority is displayed. The
priority is determined by the severity of the deviation from standard operation (red = failure = highest priority).
Displays in NAMUR mode:
StatusdisplayinaccordancewithNE107,edition2006-06-12
Color Colorcode Description Meaning
Red 5 Failure, error or
fault
Due to a malfunction in the device or on its periphery, controlled
operation is not possible
Orange 4 Function check The device is being worked on; controlled operation is therefore
temporarily not possible.
Yellow 3 Out of
specication
The ambient conditions or process conditions for the device are
outside the specied area.
Device internal diagnostics point to problems in the device or
with the process properties.
Blue 2 Maintenance
required
The device is in controlled operation, however function is briey
restricted.
→Maintain device.
Green 1 Diagnostics
active
Device is operating faultlessly. Status changes are shown in
color.
Messages are transmitted via any connected eldbus.
White 0 Diagnostics
inactive
Device is switched on.
Status changes are not shown.
Messages are not transmitted via any connected eld bus.
Table 3: Display of device status in NAMUR mode
*A detailed fault description can be found in chapter “21 Troubleshooting and messages”.
6.4.4 Flashing of the LED illuminated ring
The LED illuminated ring, which ashes briey, indicates that a connection to the PC software „Bürkert
Communicator“ has been established.
english

19
Structure and function
Type 3323, 3324, 3325
6.4.5 Device status messages
Device status messages and error messages are recorded in the logbook. Chapter “20 Maintenance, trou-
bleshooting” describes the most common messages and the required measures.
Devicestatusmessagesfor„Functioncheck“
The messages are output when operation is interrupted by work on the device.
Messagesfordevicestatus"Functioncheck"
Manual control active
M.SERVICE active
M.CLEAN active
M.Q0.TUNE active
Signal generator active
Table 4: Messages for device status „Function check“
6.5 Factory settings
Operating state:
Devices are delivered with the MANUAL operating state preset.
The factory pre-settings can be found in chapter “16 Operating structure / factory setting”
The factory settings are highlighted in blue to the right of the menu in the operating structure.
english

20
Electrical control
Type 3323, 3324, 3325
7 ELECTRICAL CONTROL
7.1 Function
The position of the actuator (stroke) is controlled by the digital input. The position is specied either by an
external signal (analogue) or via a eldbus (digital).
The position sensor detects the actual position of the electrical linear actuator and generates an end position
signal via the digital outputs.
Technicalproperties:
•Positionsensor
non-contact, high resolution and wear-free.
•Microprocessor-controlledelectronics
for signal processing, control and motor control.
•Electricalinterfaces
Circular plug-in connector or cable gland
7.1.1 Interfaces
Digital input
24 V
electromotive
diaphragmvalve 2 digital outputs
24 V PNP
Inputs
Outputs
Supply
Operation
Note:
Optional outputs are represented
as a broken line.
Communication
Fieldbus
büS / CANopen
Figure 4: Interfaces of the electromotive diaphragm valve
The electromotive valve is designed using three-wire technology, i.e. the power (24VDC) is supplied
separately from the position signal of the digital input.
english