Burkert 8222 ELEMENT NEUTRINO User manual

Operating Instructions
Bedienungsanleitung
Manuel d’utilisation
Type8222 ELEMENT neutrino
IO-Link / büS
Conductivity meter
Leitfähigkeits-Messgerät
Conductivimètre

We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modications techniques.
© Bürkert SAS, 2022–2023
Operating Instructions 2310/01_EU-ML 00574525 Original EN

3
Type 8222 ELEMENT neutrino
1. ABOUT THIS DOCUMENT...................................................... 7
1.1. Manufacturer............................................................................. 7
1.2. Symbols used ........................................................................... 7
1.3. Terms and abbreviations .......................................................... 8
2. SAFETY ................................................................................... 8
2.1. Intended use ............................................................................. 8
2.2. Safety instructions .................................................................... 8
3. PRODUCT DESCRIPTION ................................................... 11
3.1. Product overview .................................................................... 11
3.2. Product digital output............................................................. 11
3.3. Conductivity sensor ............................................................... 12
3.4. Type label ................................................................................ 12
4. TECHNICAL DATA ................................................................ 13
4.1. Standards and directives .................................... 13
4.1.1. Conformity to the pressure equipment directive............................... 13
4.1.2. UL certication ............................................................................... 14
4.2. Operating conditions .............................................................. 14
4.3. Fluid data................................................................................. 15
4.4. Electrical data.......................................................................... 18
4.5. Mechanical data...................................................................... 18
4.6. Dimensions ............................................................................. 19
4.7. Conductivity sensor ................................................................ 20
5. INSTALLATION ..................................................................... 20
5.1. Unscrewing the cover on the connection box ...................... 20
5.2. Fitting the cover to the connection box ................................ 21
5.3. Installation on the pipe .......................................................... 22
5.3.1. Device variant with a G11/2" union nut ......................................... 22
5.3.2. Device variant with a G3/4" external-threaded conductivity sensor 23
6. ELECTRICAL INSTALLATION ............................................... 24
7. IO-LINK COMMUNICATION ................................................. 24
7.1. Safety instructions .................................................................. 25
7.2. Communication table.............................................................. 25
7.3. IODD ........................................................................................ 25
7.4. Connection to the IO-Link master.......................................... 26
7.5. Setting and operation in IO-Link ............................................ 26
7.5.1. Home page .................................................................................... 27
7.5.2. Identication ............................................................................... 27
7.5.3. Parameter .................................................................................... 28
7.5.4. Observation ................................................................................. 31
7.5.5. Diagnostic .................................................................................... 31
English

4
Type 8222 ELEMENT neutrino
8. BÜS COMMUNICATION ....................................................... 33
8.1. Safety instructions ................................................................. 33
8.2. Setting tools and setting software ......................................... 33
8.3. Description of the user interface ........................................... 33
8.4. Available login user levels ...................................................... 33
8.5. Product functions and menus ............................................... 34
9. SENSOR – PARAMETER .................................................... 35
9.1. Choosing the type of temperature compensation ................ 35
9.2. Setting parameter for each measured values ....................... 36
9.2.1. Set the lter response time of a measured value .............................. 36
9.2.2. Activating the monitoring of measured values.................................. 37
9.2.3. Deactivating the monitoring of measured values.............................. 40
9.2.4. Changing the error limits, the warning limits and the hyster-
esis of the measured values ............................................................ 40
9.3. Congure reaction of the device to specic events.............. 40
9.3.1. Activating the monitoring of an event............................................... 40
9.3.2. Deactivating the monitoring of an event........................................... 41
9.4. Resetting to factory default parameter data.......................... 41
10. SENSOR – DIAGNOSTICS ................................................ 41
11. SENSOR – MAINTENANCE .............................................. 42
11.1. Checking the output behaviour.............................................. 42
11.2. Calibration ............................................................................... 43
11.2.1. 1 point calibration............................................................................ 43
11.2.2. Setting cell constant........................................................................ 44
11.2.3. Setting TDS cell constant ................................................................ 44
11.2.4. Setting temperature oset ............................................................... 44
11.3. Congure calibration schedule............................................... 44
11.4. Resetting calibration data to factory default value ............... 45
12. GENERAL SETTINGS – PARAMETER ............................. 45
12.1. Changing the operating mode of the device status
indicator or switching o the device status indicator ........... 46
12.1.1. Changing the operating mode of the device status indicator............ 46
12.1.2. Switching o the device status indicator .......................................... 46
12.2. Setting the basic parameters for identifying the device
on büS ..................................................................................... 46
12.2.1. Entering a name for the device ........................................................ 46
12.2.2. Entering the location of the device................................................... 47
12.2.3. Entering a description for the device................................................ 47
English

5
Type 8222 ELEMENT neutrino
12.3. Setting the advanced parameters for identifying the
device connected to büS or to a CANopen bus .................... 47
12.3.1. Entering a unique name for the device............................................. 47
12.3.2. Changing the transmission speed on the device.............................. 48
12.3.3. Changing the address of the device connected to a CANopen bus . 48
12.3.4. Setting the digital communication for büS or for a CANopen bus..... 49
12.3.5. Stop sending the measured process data (PDOs) to büS or
to the CANopen eldbus ................................................................. 49
12.4. Monitoring the supply voltage or the device temperature .... 50
12.4.1. Reading out the 2 error limit values.................................................. 50
12.4.2. Changing the 2 warning limit values................................................. 50
12.4.3. Reading out the hysteresis value ..................................................... 51
12.5. Activating the diagnostics function........................................ 51
12.6. Disabling all the diagnostics................................................... 51
12.7. PDOs conguration................................................................. 52
12.7.1. Set the transmission time between 2 values of a PDO..................... 52
12.7.2. Restore all PDOs to their default values ........................................... 52
13. GENERAL SETTINGS – DIAGNOSTICS .......................... 52
13.1. Reading out device status information .................................. 53
13.2. Reading out büS status information ...................................... 53
13.3. Resetting errors counter......................................................... 53
13.4. Read the generated events..................................................... 54
14. GENERAL SETTINGS – MAINTENANCE ......................... 56
14.1. Restart the product ................................................................ 56
14.2. Reset the product to its factory settings .............................. 57
15. PROCESS DATA OBJECTS ................................................ 57
15.1. Transmitted PDOs .................................................................. 57
15.2. Structure of the PDO3 ............................................................ 57
16. MAINTENANCE .................................................................. 59
16.1. Cleaning the device ................................................................ 59
17. TROUBLESHOOTING ......................................................... 59
17.1. Messages : failure, error or malfunction .......................... 59
17.1.1. Message büS is not operational ................................................. 59
17.1.2. Message Factory data failure ..................................................... 60
17.1.3. Message Temperature failure ..................................................... 60
17.1.4. Message Sensor connection lost ............................................... 60
17.1.5. Message Error: too low Conductivity ........................................ 60
17.1.6. Message Error: too high Conductivity ....................................... 60
17.1.7. Message Error: too low temperature ......................................... 61
17.1.8. Message Error: too high temperature ........................................ 61
17.1.9. Message Error: too low TDS .......................................................... 61
17.1.10. Message Error: too high TDS ..........................................................61
17.1.11. Message Error: too low Resistivity ............................................ 62
17.1.12. Message Error: too high Resistivity ........................................... 62
English

6
Type 8222 ELEMENT neutrino
17.2. Messages : function check .............................................. 62
17.2.1. Message Simulation mode active .............................................. 62
17.3. Messages : out of specication ....................................... 63
17.3.1. Message Warning: too low Conductivity ................................... 63
17.3.2. Message Warning: too high Conductivity ................................. 63
17.3.3. Message Warning: too low temperature ................................... 63
17.3.4. Message Warning: too high temperature .................................. 63
17.3.5. Message Warning: too low TDS .................................................. 64
17.3.6. Message Warning: too high TDS ................................................ 64
17.3.7. Message Warning: too low Resistivity ....................................... 64
17.3.8. Message Warning: too high Resistivity ..................................... 64
17.4. Messages : maintenance required ................................... 65
17.4.1. Message Calibration date has expired ...................................... 65
18. SPARE PARTS AND ACCESSORIES ................................. 65
19. PACKAGING, TRANSPORT ............................................... 66
20. STORAGE ........................................................................... 66
21. DISPOSAL ........................................................................... 66
English

7
About this Document
Type 8222 ELEMENT neutrino
1. ABOUT THIS DOCUMENT
The document is an important part of the product and guides
the user to safe installation and operation. The information and
instructions in this document are binding for the use of the
product.
• 
the whole safety chapter.
• 
respective sections of the document.
• Keep the document available for reference and give it to the
next user.
• 
Further information concerning the product at
country.burkert.com
.
1.1. Manufacturer
Bürkert SAS

F-67220 TRIEMBACH-AU-VAL
The contact addresses are available at country.burkert.com in
the menu Contact.
1.2. Symbols used
DANGER
Warns of a danger that leads to death or serious injuries.
WARNING
Warns of a danger that can lead to death or serious injuries.
CAUTION
Warns of a danger that can lead to minor injuries.
NOTICE
Warns of property damage that can damage the product or
the installation.

recommendations.
Refers to information in this document or in other
documents.
▶
warning or a possible risk.
→Indicates a step to be carried out.
English

8
Safety
Type 8222 ELEMENT neutrino
2.2. Safety instructions
This safety information does not take into account any contin-

and maintenance of the product.
The operating company is responsible for the respect of the local

Risk of injury due to electrical voltage.
▶If the device is installed either in a wet environment or out-

▶-
nect the electrical power for all the conductors and isolate it.
▶-
lated with respect to the mains according to the standard

▶Observe all applicable accident protection and safety regula-

Risk of injury due to pressure in the installation.
▶

▶
no pressure in the pipe.
▶

1.3. Terms and abbreviations
The terms and abbreviations are used in this document to refer to

 
2. SAFETY
2.1. Intended use
Use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
The device is intended solely for the measurement of the con-

▶Use the device in compliance with the characteristics and start-

and in the Operating Instructions.
▶
▶
▶Only operate a device in perfect working order.
▶Only use the device as intended.
English

9
Safety
Type 8222 ELEMENT neutrino
WARNING
Risk of injury due to nonconforming assembly.
▶

Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶Avoid unintentional activation of the installation.
▶-

Risk of burns due to high uid temperatures.
▶Use safety gloves to handle the device.
▶
drain the pipe.
▶
empty.
Risk of injury due to the nature of the uid.
▶Respect the prevailing regulations on accident prevention

Various dangerous situations

▶
▶device in an environment incompatible with
the device materials.
▶

country.burkert.com.
▶device to mechanical stress.
▶device.
▶
Prevent any unintentional power supply switch-on.
Various dangerous situations

▶
and maintenance work.
▶
a power supply interruption.
▶
Observe the general technical rules.
English

10
Safety
Type 8222 ELEMENT neutrino
NOTICE
Elements and components that are both sensitive to electro-
static discharges
The device contains electronic components that are sensitive
to electrostatic discharges. The components may be damaged
if they are touched by an electrostatically charged person or

destroyed or go out of order as soon as they are activated.
▶
To minimise or even avoid all damage due to an electrostatic


▶
English

11
Product description
Type 8222 ELEMENT neutrino
3. PRODUCT DESCRIPTION
3.1. Product overview

• 
sensor
• 

connector.

• A conductivity sensor with 2 electrodes that measures the

• 

probe is integrated in the conductivity sensor.
• 

- 
- Conversion of the measured impedance into conductivity
units
- 
temperature.
3.2. Product digital output
The device can communicate via büS/CANopen or IO-Link.
•


•


IO-Link or in büS.
The device automatically switches from büS to IO-Link according
to the master wired to it.


• 
• 2 times when a IO-Link master is connected.

device.
 

English

12
Product description
Type 8222 ELEMENT neutrino
3.3. Conductivity sensor
The conductivity sensor is pined together with the electronic
module and cannot be dismantled.

current measured is directly proportional to the conductivity of

3.4. Type label
4
5
6
7
810
Made in France
1 2 3
9
11
12
13
14
XXXXXX
15
16
 Operating voltage
2. Power consumption
 Output type
 Measuring range
 IP-Code
6. Fluid temperature
7. Manufacturing code
 Conformity marking
9. 


Instructions
Article number
Serial number

Constant of the measuring cell

Pin assignment of the electrical connection
 
English

13
Technical data
Type 8222 ELEMENT neutrino
4. TECHNICAL DATA
4.1. Standards and directives
The device complies with the relevant EU harmonisation leg-
-
ments of the laws of the United Kingdom.
The harmonised standards that have been applied for the con-
formity assessment procedure are listed in the current version of

4.1.1. Conformity to the pressure equipment
directive
▶Make sure that the device materials are compatible with the

▶
▶



• 

Type of uid Conditions

 













• 

Type of uid Conditions
















English

14
Technical data
Type 8222 ELEMENT neutrino
4.1.2. UL certication


• 
• 
  Variable key
 
Measuring
Equipment
EXXXXXX
®
UL-listed PU02
4.2. Operating conditions
Ambient temperature 
Air humidity 
Operating condition Continuous operation
Mobility of the device Fixed device
Use Indoor and outdoor
▶Protect the device against electromag-


the climatic conditions.
• IP-Code
• NEMA protection
type
 
• 
• 
Mating connector must be wired and
plugged.
Cover of the connecting box must be
fully tightened and locked.
 
Installation category 
Maximum height
above sea level

English

15
Technical data
Type 8222 ELEMENT neutrino
4.3. Fluid data
Process connection
• 

conductivity sensor
• 
thread
• 

• Type S022 adapter or Type S022

Fluid pressure
• 

conductivity sensor
 


by the fluid temperature and the
material of the adapter used. Refer
to  and .
• 

 



of the union nut and the material
from which the Type S022 is made.
Refer to   and .
Fluid temperature
• 

conductivity sensor


the material of the adapter used.
Refer to  and .
• 



material of the union nut and the
material of the Type S022 used.
Refer to   and 
Conductivity measurement
• Measurement range
• Internal resolution
• Accuracy without tem-
perature compensation
• 
• 
• 
Temperature probe -
tivity sensor
Temperature measurement
• Measurement range
• Accuracy
• 
• 
Temperature compensation • No compensation
• Linear compensation
• Compensation according to a

pure water
• 
English

16
Technical data
Type 8222 ELEMENT neutrino
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0-20 0 +20 +40 +60 +80 +100
T (°C)
P (bar)
+120
PVC
232
217.6
203
188.6
174
159.6
145
130.6
116
101.6
87
72.5
58
43.5
29
14
0
P (psi)
Metal
The measurements have been made at an ambient temperature of

 


-20 0 +20 +40 +60 +80 +100+120T (°C)
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
P (bar)
A
A
B
232
217.6
203
188.6
174
159.6
145
130.6
116
101.6
87
72.5
58
43.5
29
14
0
P (psi)

sensor;


 



English

17
Technical data
Type 8222 ELEMENT neutrino
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
00 +20 +40 +60 T (°C)
P (bar)
PVC + PP
-20
232
217.6
203
188.6
174
159.6
145
130.6
116
101.6
87
72.5
58
43.5
29
14
0
P (psi)
Metal
 


16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0-20 0 +20 +40 +60 +80 +100
PVC
PP
T (°C)
P (bar)
PVC + PP
+120
232
217.6
203
188.6
174
159.6
145
130.6
116
101.6
87
72.5
58
43.5
29
14
0
P (psi)
Metal
 


English

18
Technical data
Type 8222 ELEMENT neutrino
4.4. Electrical data
Operating voltage • 
• -
manent through external safety

through limited power source

• Filtered and regulated
Power consumption 
Power source

• Limited power source according

• or limited energy circuit


Protection against polarity
reversal
Yes
Protection against voltage
spikes
Yes
 
4.5. Mechanical data
 

Part Material
Box / seals 
Cover / seal 
 
 Nickel-plated brass
Light guide PC and PMMA
 Refer to the data sheet
 

Part Material
Union nut • PVC
• 
English

19
Technical data
Type 8222 ELEMENT neutrino
 

Part Material
Armature of the conductivity
sensor 
 
Electrodes of the conductivity
 
Electrodes of the conductivity
 
 

Part Material
Seal of the conductivity sensor  

Stainless steel


PVC or


PPS

PA66 or Nickel-

Stainless steel
Nickel-plated brass
PC and PMMA
 
4.6. Dimensions
→
country.burkert.com.
English

20
Installation
Type 8222 ELEMENT neutrino
5. INSTALLATION
5.1. Unscrewing the cover on the
connection box
NOTICE
The tightness of the device is not guaranteed when the cover
is removed.
▶
inside the housing.
The connection box

system.
→Using a screwdriver

turn the latch to the
unlock position to
unlock the connection
box.
4.7. Conductivity sensor

• Measurement range
• 
• 
• 

• Measurement range
• 
• 
• 
industrial wastewater

• Measurement range
• 
• 
• -

English