Burkert 8228 ELEMENT neutrino User manual

Operating Instructions
Bedienungsanleitung
Manuel d‘utilisation
Type8228 ELEMENT neutrino
IO-Link / büS
Conductivity meter
Leitfähigkeits-Messgerät
Conductivimètre

We reserve the right to make technical changes without notice.
Technische Änderungen vorbehalten.
Sous réserve de modications techniques.
© Bürkert SAS, 2023
Operating Instructions 2309/00_EU-ML 00574526 Original EN

3
Type 8228 ELEMENT neutrino
1. ABOUT THIS DOCUMENT...................................................... 7
1.1. Manufacturer............................................................................. 7
1.2. Symbols used ........................................................................... 7
1.3. Terms and abbreviations .......................................................... 8
2. SAFETY INSTRUCTIONS........................................................ 8
2.1. Intended use ............................................................................. 8
2.2. Safety .................................................................... 8
3. PRODUCT DESCRIPTION ................................................... 10
3.1. Product overview .................................................................... 10
3.2. Product digital output............................................................. 10
3.3. Type label ................................................................................ 11
4. TECHNICAL DATA ................................................................ 12
4.1. Conditions of use .................................................................... 12
4.2. Standards and directives........................................................ 12
4.2.1. Conformity to the pressure equipment directive............................... 12
4.2.2. UL certication ............................................................................... 13
4.3. Materials.................................................................................. 13
4.4. Dimensions ............................................................................. 15
4.5. Fluid data................................................................................. 15
4.6. Electrical data.......................................................................... 17
5. MODIFY COVER ORIENTATION .......................................... 17
5.1. Safety instructions ................................................................. 17
5.2. Unscrew the cover on the connection box ........................... 18
5.3. Fit the cover to the connection box ...................................... 18
6. INSTALLATION AND WIRING .............................................. 19
6.1. Safety instructions ................................................................. 19
6.2. Install onto the pipe ............................................................... 20
6.2.1. Device variant with a G2" union nut ............................................... 20
6.2.2. Device variant with a 2" clamp connection ...................................... 21
7. ELECTRICAL INSTALLATION................................................ 22
8. IO-LINK COMMUNICATION ................................................. 22
8.1. Safety instructions .................................................................. 23
8.2. Communication table.............................................................. 23
8.3. IODD ........................................................................................ 24
8.4. Connection to the IO-Link master.......................................... 24
8.5. Setting and operation in IO-Link ............................................ 24
8.5.1. Home page .................................................................................... 25
8.5.2. Identication ................................................................................ 25
8.5.3. Parameter .................................................................................... 26
8.5.4. Observation ................................................................................. 30
8.5.5. Diagnostic .................................................................................... 30
English

4
Type 8228 ELEMENT neutrino
9. SETTING AND OPERATION IN BÜS..................................... 31
9.1. Safety instructions ................................................................. 31
9.2. Setting tools and setting software ......................................... 32
9.3. Description of the user interface ........................................... 32
9.4. Available login user levels ...................................................... 32
9.5. Product functions and menus ............................................... 33
10. SENSOR – PARAMETER ................................................... 33
10.1. Choosing the type of temperature compensation ................ 34
10.2. Selecting concentration table ................................................ 35
10.3. Setting parameter for each measured values ....................... 36
10.3.1. Set the lter response time of a measured value .............................. 36
10.3.2. Activating the monitoring of measured values.................................. 36
10.3.3. Deactivating the monitoring of measured values.............................. 39
10.3.4. Changing the error limits, the warning limits and the hyster-
esis of the measured values ............................................................ 39
10.4. Congure reaction of the device to specic events.............. 40
10.4.1. Activating the monitoring of an event............................................... 40
10.4.2. Deactivating the monitoring of an event........................................... 40
10.5. Resetting to factory default parameter data.......................... 40
11. SENSOR – DIAGNOSTICS ................................................ 41
12. SENSOR – MAINTENANCE ............................................... 42
12.1. Checking the output behaviour.............................................. 42
12.2. Calibration ............................................................................... 43
12.2.1. Zero adjustment ............................................................................. 45
12.2.2. 1 point calibration ........................................................................... 45
12.2.3. Setting cell constant........................................................................ 46
12.2.4. Setting KFitting............................................................................... 46
12.2.5. Setting TDS cell constant ................................................................ 46
12.2.6. Teach special ................................................................................. 46
12.2.7. Setting temperature oset .............................................................. 48
12.3. Congure calibration schedule............................................... 48
12.4. Resetting calibration data to factory default value .............. 48
13. GENERAL SETTINGS – PARAMETER .............................. 49
13.1. Changing the operating mode of the device status
indicator or switching o the device status indicator ........... 49
13.1.1. Changing the operating mode of the device status indicator............ 49
13.1.2. Switching o the device status indicator .......................................... 50
English

5
Type 8228 ELEMENT neutrino
13.2. Setting the basic parameters for identifying the device
on büS ..................................................................................... 50
13.2.1. Entering a name for the device ........................................................ 50
13.2.2. Entering the location of the device................................................... 50
13.2.3. Entering a description for the device................................................ 50
13.3. Setting the advanced parameters for identifying the
device connected to büS or to a CANopen bus .................... 51
13.3.1. Entering a unique name for the device............................................. 51
13.3.2. Changing the transmission speed on the device.............................. 51
13.3.3. Changing the address of the device connected to a CANopen bus . 52
13.3.4. Setting the digital communication for büS or for a CANopen bus..... 52
13.3.5. Stop sending the measured process data (PDOs) to büS or
to the CANopen eldbus ................................................................. 53
13.4. Monitoring the supply voltage or the device temperature .... 53
13.4.1. Reading out the 2 error limit values.................................................. 54
13.4.2. Changing the 2 warning limit values................................................. 54
13.4.3. Reading out the hysteresis value ..................................................... 54
13.5. Activating the diagnostics function........................................ 54
13.6. Disabling all the diagnostics................................................... 55
13.7. PDOs conguration................................................................. 55
13.7.1. Set the transmission time between 2values of a PDO ..................... 55
13.7.2. Restore all PDOs to their default values ........................................... 55
14. GENERAL SETTINGS – DIAGNOSTICS ........................... 56
14.1. Reading out device status information .................................. 56
14.2. Reading out büS status information ...................................... 57
14.3. Resetting errors counter......................................................... 57
14.4. Read the generated events..................................................... 57
15. GENERAL SETTINGS – MAINTENANCE .......................... 59
15.1. Restart the product ................................................................ 59
15.2. Reset the product to its factory settings .............................. 59
16. PROCESS DATA OBJECTS ................................................ 60
16.1. Transmitted PDOs .................................................................. 60
16.2. Structure of the PDO3 ............................................................ 60
17. MAINTENANCE .................................................................. 62
17.1. Safety instructions ................................................................. 62
17.2. Cleaning the device ................................................................ 62
English

6
Type 8228 ELEMENT neutrino
18. TROUBLESHOOTING WITH MESSAGES .......................... 63
18.1. Messages : failure, error or malfunction .......................... 63
18.1.1. Message büS is not operational .................................................. 63
18.1.2. Message Factory data failure ...................................................... 63
18.1.3. Message Temperature failure ...................................................... 63
18.1.4. Message Sensor connection lost ................................................ 63
18.1.5. Message Sensor probe error ....................................................... 64
18.1.6. Message Error: too low conductivity .......................................... 64
18.1.7. Message Error: too high conductivity ........................................ 64
18.1.8. Message Error: too low temperature .......................................... 64
18.1.9. Message Error: too high temperature ......................................... 65
18.1.10. Message Error: too low concentration ....................................... 65
18.1.11. Message Error: too high concentration ...................................... 65
18.1.12. Message Error: too low TDS ........................................................ 65
18.1.13. Message Error: too high TDS ...................................................... 66
18.1.14. Message Error: too low resistivity ............................................... 66
18.1.15. Message Error: too high resistivity ............................................. 66
18.2. Messages : function check .............................................. 66
18.2.1. Message Simulation mode active ............................................... 66
18.3. Messages : out of specication ....................................... 67
18.3.1. Message Warning: too low conductivity .................................... 67
18.3.2. Message Warning: too high conductivity ................................... 67
18.3.3. Message Warning: too low temperature .................................... 67
18.3.4. Message Warning: too high temperature ................................... 67
18.3.5. Message Warning: too low concentration .................................. 68
18.3.6. Message Warning: too high concentration ................................ 68
18.3.7. Message Warning: too low TDS .................................................. 68
18.3.8. Message Warning: too high TDS ................................................. 68
18.3.9. Message Warning: too low resistivity ......................................... 69
18.3.10. Message Warning: too high resistivity ....................................... 69
18.4. Messages : maintenance required ................................... 69
18.4.1. Message Calibration date has expired ....................................... 69
19. SPARE PARTS AND ACCESSORIES ................................. 70
20. PACKAGING, TRANSPORT ............................................... 70
21. STORAGE ........................................................................... 70
22. DISPOSAL ........................................................................... 70
English

7
About this Document
Type 8228 ELEMENT neutrino
1. ABOUT THIS DOCUMENT
The document is an important part of the product and guides
the user to safe installation and operation. The information and
instructions in this document are binding for the use of the
product.
• 
the whole safety chapter.
• 
respective sections of the document.
• Keep the document available for reference and give it to the
next user.
• 
Further information concerning the product at
country.burkert.com
.
1.1. Manufacturer
Bürkert SAS

F-67220 TRIEMBACH-AU-VAL
The contact addresses are available at country.burkert.com in
the menu Contact.
1.2. Symbols used
DANGER
Warns of a danger that leads to death or serious injuries.
WARNING
Warns of a danger that can lead to death or serious injuries.
CAUTION
Warns of a danger that can lead to minor injuries.
NOTICE
Warns of property damage that can damage the product or
the installation.

recommendations.
Refers to information in this document or in other
documents.
▶
warning or a possible risk.
→Indicates a step to be carried out.
English

8
About this Document
Type 8228 ELEMENT neutrino
1.3. Terms and abbreviations
The terms and abbreviations are used in this document to refer to

 
2. SAFETY INSTRUCTIONS
2.1. Intended use
Use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
The device is intended solely for the measurement of the con-

▶Use the device in compliance with the characteristics and start-

and in the Operating Instructions.
▶Do not use the device for security applications.
▶
▶Only operate a device in perfect working order.
▶Only use the device as intended.
2.2. Safety
This safety information does not take into account any contin-

and maintenance of the product.
The operating company is responsible for the respect of the local

Risk of injury due to electrical voltage.
▶If the device is installed either in a wet environment or out-

▶-
nect the electrical power for all the conductors and isolate it.
▶-
lated with respect to the mains according to the standard

▶Observe all applicable accident protection and safety regula-

Risk of injury due to pressure in the installation.
▶

▶
no pressure in the pipe.
▶

English

9
About this Document
Type 8228 ELEMENT neutrino
Risk of burns due to high uid temperatures.
▶Use safety gloves to handle the device.
▶
drain the pipe.
▶
empty.
Risk of injury due to the nature of the uid.
▶Respect the prevailing regulations on accident prevention

Various dangerous situations

▶Do not use the device in explosive atmospheres.
▶Do not use the device in an environment incompatible with
the device materials.
▶

country.burkert.com.
▶Do not subject the device to mechanical stress.
▶device.
▶Prevent any unintentional power supply switch-on.
Various dangerous situations

▶
and maintenance work.
▶
a power supply interruption.
▶
Observe the general technical rules.
NOTICE
Elements and components that are both sensitive to electrostatic
discharges
The device contains electronic components that are sensitive
to electrostatic discharges. The components may be damaged
if they are touched by an electrostatically charged person or

destroyed or go out of order as soon as they are activated.
▶
To minimise or even avoid all damage due to an electrostatic


▶Do not touch any of the live electrical components.
English

10
Product Description
Type 8228 ELEMENT neutrino
3. PRODUCT DESCRIPTION
3.1. Product overview

• 
• -
tivity sensor

connector.

• 
- 
- 
grated temperature probe.
The conductivity sensor is pined together with the electronic
module and cannot be dismantled.
The conductivity sensor comprises a temperature probe to
compensate the temperature when measuring the conductivity.
• 

- 
- 
- 
- 

3.2. Product digital output

•


) are dedicated to a use in IO-Link only.
•

) can be used either in
IO-Link or in büS.
The device automatically switches from büS to IO-Link according
to the master wired to it.


• 
• 2 times when a IO-Link master is connected.

device.
 Device LED
Device Box
English

11
Product Description
Type 8228 ELEMENT neutrino
3.3. Type label
4
5
6
7
810
Made in France
15
16
1 2 3
9
11
12
13
14
XXXXXX
 Operating voltage
2. Power consumption
 Output type
 Measuring range
 IP-Code
6. Fluid temperature
7. Manufacturing code
 Conformity marking
9. 


Instructions
Article number
Serial number

Constant of the measuring cell

Pin assignment of the electrical connection
 
English

12
Technical Data
Type 8228 ELEMENT neutrino
4. TECHNICAL DATA
4.1. Conditions of use
Ambient temperature 
Air humidity 
Operating condition Continuous operation
Mobility of the device Fixed device
Use Indoor and outdoor
▶Protect the device against electromag-


the climatic conditions.
• IP-Code
• 
type
 
• 
• 
Mating connector must be wired and
plugged.
Cover of the connecting box must be
fully tightened and locked.
Degree of pollution 
Installation category 
Maximum height
above sea level

4.2. Standards and directives
The device complies with the relevant EU harmonisation leg-
-
ments of the laws of the United Kingdom.
The harmonised standards that have been applied for the con-
formity assessment procedure are listed in the current version of
the EU Declaration of Conformity/UK Declaration of Conformity.
4.2.1. Conformity to the pressure equipment
directive
▶Make sure that the device materials are compatible with the

▶
▶



• 

Type of uid Conditions

 




English

13
Technical Data
Type 8228 ELEMENT neutrino
Type of uid Conditions









• 

Type of uid Conditions
















4.2.2. UL certication


• 
• 
  Variable key
 
Measuring
Equipment
EXXXXXX
®
UL-listed PU02
4.3. Materials
 

Part Material
Box / seals 
Cover / seal 
 
 
Light guide PC and PMMA
English

14
Technical Data
Type 8228 ELEMENT neutrino
 

Part Material
Union nut PC/PPA
 

Part Material
Armature of the conductivity
sensor PVDF or PP or PEEK
Seal FKM
 

Part Material
Adapter for clamp Stainless steel
 

Part Material
Armature of the conductivity
sensor PEEK
Seal EPDM
PVDF / PP / PEEK
Stainless steel
PC and PMMA
PPS
EPDM
EPDM



Stainless steel
 
English

15
Technical Data
Type 8228 ELEMENT neutrino
4.4. Dimensions
→
country.burkert.com.
4.5. Fluid data
Fluid temperature
• Device variant with con-
ductivity sensor holder
in PVDF

• Device variant with con-
ductivity sensor holder
in PP

• Device variant with con-
ductivity sensor holder
in PEEK

 

.
Fluid pressure
• Device variant with con-
ductivity sensor holder
in PVDF
 



material of the conductivity-sensor
holder and the material of the Type
.
English

16
Technical Data
Type 8228 ELEMENT neutrino
Temperature compensation • 
• Compensation according to a


• Compensation according to


12
11
10
9
8
7
6
5
4
3
2
1
0-200+20 +40 +60 +80 +100 +140
PP
T (°C)
P (bar)
+120
PVDF
PEEK
 



• Device variant with con-
ductivity sensor holder
in PP
 



the material of the conductivity-
sensor holder and the material of

to .
• Device variant with con-
ductivity sensor holder
in PEEK
 



the material of the conductivity-
sensor holder and the material of

to .
Conductivity measurement
• Measurement range
• Internal resolution
• Measuring error
• 
• 
• 

Temperature probe Integrated in the conductivity
sensor
Temperature measurement
• Measurement range
• Accuracy
• 
• 
English

17
Modify cover orientation
Type 8228 ELEMENT neutrino
4.6. Electrical data
Operating voltage • 
• -
manent through external safety
extra-low voltage (SELV) and
through limited power source
(LPS)
• Filtered and regulated
Power consumption 
Power source
(not supplied)
• Limited power source according

• or limited energy circuit


Protection against polarity
reversal
Yes
Protection against voltage
spikes
Yes
Digital output 
5. MODIFY COVER ORIENTATION
5.1. Safety instructions
DANGER
Risk of injury due to electrical voltage.
▶If the device is installed either in a wet environment or out-

▶-
nect the electrical power for all the conductors and isolate it.
▶-
lated with respect to the mains according to the standard

▶Observe all applicable accident protection and safety regula-

WARNING
Risk of injury due to nonconforming assembly.
▶

Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶Avoid unintentional activation of the installation.
▶-

English

18
Modify cover orientation
Type 8228 ELEMENT neutrino
5.2. Unscrew the cover on the
connection box
NOTICE
The tightness of the device is not guaranteed when the cover
is removed.
▶
inside the housing.
The connection box

system.
→Using a screwdriver

turn the latch to the
unlock position to
unlock the connection
box.
→Unscrew the cover on
the connection box by
hand.
 
5.3. Fit the cover to the connection box
B
→Check that seal

is in good con-
dition. Replace it if
necessary.
English

19
Installation and wiring
Type 8228 ELEMENT neutrino
Slots
Polarising slots
→Position the polar-
ising slots on the
cover in the axis
of the slots on the

possible.
→Tighten the cover on
the connection box.
→Using a screwdriver

turn the latch to the
lock position to lock
the cover.
 
6. INSTALLATION AND WIRING
6.1. Safety instructions
DANGER
Risk of injury due to pressure in the installation.
▶
the pipe before loosening the process connections.
Risk of injury due to electrical voltage.
▶If the device is installed either in a wet environment or out-

▶-
nect the electrical power for all the conductors and isolate it.
▶-
lated with respect to the mains according to the standard

▶Observe all applicable accident protection and safety regula-

Risk of injury due to the nature of the uid.
▶Respect the regulations on accident prevention and safety

Risk of injury due to the high temperature of the uid.
▶Use safety gloves to handle the device.
English

20
Installation and wiring
Type 8228 ELEMENT neutrino
6.2. Install onto the pipe


).
• 

by means of an internal threated adapter.
• 
-
nection according to ASME BPE.
6.2.1. Device variant with a G2" union nut
→Choose an appropriate position in the pipe to install the S020

→

 
WARNING
Risk of injury due to nonconforming installation.
▶

▶Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
▶
adapter used.
Risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶Avoid unintentional activation of the installation.
▶-

WARNING
Risk of injury if the dependency between the uid pressure
and the uid temperature is not respected.
▶-

.
▶

Refer to the related Operating Instructions.
English