Burkert FLOWave L User manual
Operating Instructions
Type 8098
FLOWave L
SAW Flowmeter
Software version A.04.00.00 and higher
We reserve the right to make technical changes without notice.
© Bürkert SAS, 2015 – 2022
Operating Instructions 2203/08_EU-EN 00567647 / Original EN
Type 8098FLOWaveL
General contents
GENERAL INFORMATION...............................................................................................................................5
DESCRIPTION................................................................................................................................................13
TECHNICAL DATA..........................................................................................................................................21
INSTALLATION IN THE PIPE.........................................................................................................................37
ELECTRICAL INSTALLATION .......................................................................................................................51
COMMISSIONING .........................................................................................................................................73
DOING THE SETTINGS..................................................................................................................................79
MENU DISPLAY .............................................................................................................................................97
MENU GENERAL SETTINGS ...................................................................................................................... 105
MENU SAW SENSOR – PARAMETER .......................................................................................................145
MENU SAW SENSOR – DIAGNOSTICS .....................................................................................................249
MENU SAW SENSOR – MAINTENANCE ...................................................................................................255
MENU OUTPUTS ........................................................................................................................................287
MENU INDUSTRIAL COMMUNICATION ....................................................................................................305
TROUBLESHOOTING, MAINTENANCE, TRANSPORT, STORAGE ..........................................................317
APPENDIX ....................................................................................................................................................351
3
English
General contents
4
Type 8098FLOWaveL
English
5
Type 8098FLOWaveL
1THE OPERATING INSTRUCTIONS .......................................................................................................6
1.1 Symbols used .............................................................................................................................. 6
1.2 Denitionofthetermdevice .......................................................................................................6
1.3 DenitionofthetermbüS............................................................................................................7
1.4 ValidityoftheOperatingInstructions..........................................................................................7
2INTENDED USE ......................................................................................................................................8
2.1 DevicewithATEX/IECExcertication .......................................................................................8
3BASIC SAFETY INFORMATION .............................................................................................................9
4GENERAL INFORMATION....................................................................................................................11
4.1 Manufacturer'saddressandinternationalcontacts ................................................................11
4.2 Warrantyconditions...................................................................................................................11
4.3 InformationontheInternet........................................................................................................11
General information
English
6
The Operating Instructions
Type 8098FLOWaveL
1 THE OPERATING INSTRUCTIONS
The Operating Instructions describe the entire life cycle of the device. Please keep the Operating Instruc-
tions in a safe place, accessible to all users and any new owners.
TheOperatingInstructionscontainimportantsafetyinformation.
Failure to comply with these instructions can lead to hazardous situations. Pay attention in particular to
3 Basic safety information and 2 Intended use.
▶Irrespective of the device variant, the Operating Instructions must be read and understood.
1.1 Symbols used
DANGER
Warnsagainstanimminentdanger.
▶Failure to observe this warning results in death or in serious injury.
WARNING
Warnsagainstapotentiallydangeroussituation.
▶Failure to observe this warning can result in serious injury or even death.
CAUTION
Warnsagainstapossiblerisk.
▶Failure to observe this warning can result in substantial or minor injuries.
NOTICE
Warnsagainstmaterialdamage.
Indicates additional information, advice or important recommendations.
Refers to information contained in these Operating Instructions or in other documents.
▶Indicates an instruction to be carried out to avoid a danger, a warning or a possible risk.
→Indicates a work step which you must carry out.
A highlightedterm is related to a menu or a menu item.
1.2 Denition of the term device
English
7
The Operating Instructions
Type 8098FLOWaveL
1.3 Denition of the term büS
The term "büS" used in these Operating Instructions refers to the industrial communication, developed by
Bürkert, based on the CANopen protocol. The term "büS" refers to the Bürkert system bus.
→For more information on büS, read the cabling guide available in English and in Japanese (Cabling_
guide_for_büS/EDIP.pdf) at country.burkert.com.
→For more information on CANopen which is related to the device, refer to the Operating Instructions
country.burkert.com.
1.4 Validity of the Operating Instructions
The Operating Instructions are valid for the devices from software version A.04.00.00.
To read out the version number of the device software, do the following:
→Go to the CONFIGURATION view.
→Generalsettings
→Parameter view.
→MAINTENANCE view.
→Deviceinformation
→Softwareversion
→
English
8
Intended use
Type 8098FLOWaveL
2 INTENDED USE
Useofthedevicethatdoesnotcomplywiththeinstructionscouldpresentriskstopeople,nearby
installationsandtheenvironment.
TheType8098FLOWaveLowmeterusestheSurfaceAcousticWave(SAW)measurementprinciple
andisintendedtomeasuretheowrateofliquidsthathaveallthefollowingcharacteristics:
clean liquids
liquids that are free of air bubbles
liquids that are free of gas bubbles
liquids that are free of solids.
▶
origin of the bubbles (air intake, cavitation, degassing…).
▶Use the device in compliance with the characteristics and the conditions of commissioning and use
▶Protect the device against electromagnetic interference, ultraviolet rays and, when installed outdoors,
▶Only operate a device in perfect working order.
▶Properly transport, store, install and operate the device.
▶Only use the device as intended.
2.1 Device with ATEX/IECEx certication
DANGER
Riskofexplosionintheeventofimproperuseofthedeviceinpotentiallyexplosiveareas.
▶
▶-
ment is available at country.burkert.com
If unauthorized changes are made to the device, then
English
9
Basic safety information
Type 8098FLOWaveL
3 BASIC SAFETY INFORMATION
This safety information does not take into account any contingencies or occurrences that may arise during
installation, use and maintenance of the device.
Riskofinjuryduetoelectricalvoltage.
▶Before carrying out work on the system, disconnect the electrical power for all the conductors and isolate it.
▶
▶Observe all applicable accident protection and safety regulations for electrical equipment.
Riskofinjuryduetopressureintheinstallation.
▶
pipe.
▶Before any intervention in the installation, make sure there is no pressure in the pipe.
▶
Ifswitchedonforaprolongedtime,riskofburnsorreduetohotdevicesurfaces
▶Do not touch with bare hands.
▶
Riskofburnsduetohighliquidtemperatures.
▶Do not touch with bare hands the parts of the device that are in contact with the liquid.
▶Use safety gloves to handle the device.
▶Before opening the pipe, stop the circulation of liquid and drain the pipe.
▶Before opening the pipe, make sure the pipe is completely empty.
Riskofinjuryduetothenatureoftheliquid.
▶Respect the prevailing regulations on accident prevention and safety relating to the use of dangerous
liquids.
English
10
Basic safety information
Type 8098FLOWaveL
Generaldangeroussituations
To avoid injury, obey the following instructions:
▶.
▶Do not use the device in an environment incompatible with the device materials.
▶Do not use liquid that is incompatible with the device materials. Find the compatibility chart on our
homepage: country.burkert.com
▶Do not subject the device to mechanical loads.
▶
▶Prevent any unintentional power supply switch-on.
▶
▶
▶Observe the general technical rules.
CAUTION
Riskofinjuryduetoaheavydevice.
A heavy device can fall down during transport or during installation and cause injuries.
▶Transport, install and dismantle a heavy device with the help of another person.
▶Use appropriate tools.
NOTICE
Elements and components sensitive to electrostatic discharges
▶This device contains electronic components that are sensitive to electrostatic discharges. They may be
damaged if they are touched by an electrostatically charged person or object. In the worst case sce-
nario, these components are instantly destroyed or disabled as soon as they are activated.
▶To minimise or even avoid any damage caused by an electrostatic discharge, take all the precautions
▶Also make sure that you do not touch any of the live electrical components.
English
11
General information
Type 8098FLOWaveL
4 GENERAL INFORMATION
4.1 Manufacturer's address and international contacts
To contact the manufacturer of the device, use the following address:
Bürkert SAS
Rue du Giessen
country.burkert.com
4.2 Warranty conditions
The condition governing the legal warranty is the conforming use of the device in observance of the oper-
4.3 Information on the Internet
country.burkert.com
English
12
Type 8098FLOWaveL
English
13
Type 8098 FLOWave L
5DESCRIPTION ......................................................................................................................................14
5.1 Devicevariants...........................................................................................................................14
5.2 Wi-Fimodule ..............................................................................................................................16
5.3 Unlockingmagnetickey ............................................................................................................16
5.4 Typelabels .................................................................................................................................17
5.4.1 Adhesivelabels..........................................................................................................17
5.4.2 Lasermarking ............................................................................................................19
5.5 MarkingwiththeMACaddress .................................................................................................19
5.6 Certicationmarkings................................................................................................................19
5.7 MarkingoftheUniqueSerialNumber(USN) ............................................................................19
5.8 Devicestatusindicator .............................................................................................................20
Description
English
14
Description
Type 8098 FLOWave L
5 DESCRIPTION
5.1 Device variants
•
•
Device status indicator, seal
Transmitter housing, including
the electronic modules
Type SE98
transmitter
sensor
plated brass, with blind plugs
screwed plug
Sensor measurement tube
Seal
Sensor housing
Seal
Blind cover
Pressure compensating
element
Blind cover
Functional earth
stainless steel, with blind plugs
English
15
Description
Type 8098 FLOWave L
Device status indicator, seal
c housing, including the elec-
tronic modules
Type SE98
transmitter
sensor
Seal
screwed plug
Blind cover
Sensor housing
Sensor measurement tube
with screwed plugs
Blind cover
Pressure compensating
element
Seal
Functional earth
English
16
Description
Type 8098 FLOWave L
5.2 Wi-Fi module
The device can be equipped with a Wi-Fi module in place of or in addition to the display module. The
module.
The Wi-Fi module is intended for use in Europe, the USA, and Canada.
The module provides a web server which can be accessed if the following requirements are met:
•
•
•
→
available at country.burkert.com.
5.3 Unlocking magnetic key
The device is delivered with a magnetic key to unlock the display module, the Wi-Fi module or the blind
cover. See .
The device has three outputs:
•
•
•
English
17
Description
Type 8098 FLOWave L
5.4 Type labels
5.4.1 Adhesive labels
8098 FLOWave L
Supply: 12-35 5W Max.
IP65 / IP67 / NEMA4X
Ambient Temp : -10 to 70°C
88888888 SN 9999
W49MN
Made in France
21
5
810
4
6
F-67220 Triembach
28-06
12 9
CAN shield
CAN_H GND
V+
21
34 5 CAN_L
3
11
7
Supply voltage
2. Type of the device
3. Power consumption
4.
Ambient temperature range
8. Serial number
9. Conformity marking
Article number
Warning: Before using the device, take into
Operating Instructions.
English
18
Description
Type 8098 FLOWave L
8098 FLOWave L
IP65 / IP67 / NEMA 4X
Ambient temp.: -10 to 55°C
88888888 SN 9999
W49MN
Made in France
21
68
3
4
F-67220 Triembach
28-06
10 7
CAN shield
CAN_H GND
V+
21
34 5 CAN_L
9
5
2. Type of the device
3. Ambient temperature range
4.
Serial number
Conformity marking
8. Article number
9. Warning: Before using the device, take into
Operating Instructions.
S097 FLOWave Flow sensor
Pipe: 316L/1.4435 Housing: 304/1.4301
DIN 11866 C / Clamp D50.5 DIN 32676 B DN15
PN25bar Max. flow:10 m3/h
Temp. medium : -20 to 110°C
W4ZMN
Made in France
1
2
4
6
7
3
5
F-67220 Triembach
2.
3.
the process connection conforms to; DN of the measurement tube
4.
Conformity marking
English
19
Description
Type 8098 FLOWave L
5.4.2 Laser marking
Measuring
Equipment
N°E237737
28-06
Type: 8098 FLOWave L
ID:00xxxxxx | S/N:001234
W49MN
CRN 0C21751.5
Supply: 12...35V 5W Max.
IP65 | IP67 | NEMA4X
Ambient Temp: -10°...+70°C
Slot5:
Slot4:
Slot3:
Slot2:
Slot1:
1
2
3
4
5 6 78
9
1011
12
13
Type of the device
2.
3.
4. Canadian Registration Number (CRN)
Conformity marking
Electronic modules
Supported protocols, Ethernet device variant
8. Warning: Before using the device, take into
Operating Instructions.
9.
Power consumption
Operating voltage
Ambient temperature range
5.5 Marking with the MAC address
→8.9 on page .
DC-B0-58-FF-FF-FF
5.6 Certication markings
5.7 Marking of the Unique Serial Number (USN)
The USN is marked on the side of the sensor. The USN is built with the device article number and the
device serial number.
English
20
Description
Type 8098 FLOWave L
5.8 Device status indicator
The color of the device status indicator gives the following pieces of information:
• Whether device diagnostics are active on not.
• If device diagnostics are active, then the device status indicator shows whether diagnostics events have
been generated or not. If several diagnostics events have been generated, then the device status indicator
shows the diagnostics event with the highest priority. Refer to
Bürkert Communicator software.
Colour
accordingto
NE107
Colourcode
(foraPLC)
Diagnosticsevent
accordingto
NE107
Meaning
Red Failure, error or
fault
Due to a malfunction of the device or its periphery,
the measured values can be incorrect.
Orange 4 Check function
the correct behaviour of the outputs by simulating
measurement values); the output signal is temporarily
invalid (e.g. frozen).
Yellow 3 The ambient conditions or process conditions for the
device are outside the permitted ranges.
Device-internal diagnostics point to problems in the
device or with the process properties.
Blue 2
required
The device continues to measure but a function is
temporarily restricted.
→Do the required maintenance operation.
Green - Diagnostics are active and no diagnostics event has
been generated.
White 0 -Diagnostics are inactive.
English
This manual suits for next models
1
Table of contents
Other Burkert Measuring Instrument manuals
Burkert
Burkert 8228 ELEMENT User manual
Burkert
Burkert 8026 User manual
Burkert
Burkert 8030 User manual
Burkert
Burkert 8032 User manual
Burkert
Burkert 8756 User manual
Burkert
Burkert SE30 Ex Namur User manual
Burkert
Burkert 8202 ELEMENT User manual
Burkert
Burkert 8045 User manual
Burkert
Burkert 8045 User manual
Burkert
Burkert 8025 UNIVERSAL User manual
Burkert
Burkert 8032 User manual
Burkert
Burkert 8222 ELEMENT NEUTRINO User manual
Burkert
Burkert MassFlowMeter 8700 User manual
Burkert
Burkert FLOWave L 8098 User manual
Burkert
Burkert 8012 Series User manual
Burkert
Burkert 8644 AirLINE User manual
Burkert
Burkert 8202 ELEMENT User manual
Burkert
Burkert 8041 User manual
Burkert
Burkert 8035 User manual
Burkert
Burkert Flowave 8098 User manual
Popular Measuring Instrument manuals by other brands
HP
HP Agilent 8757D operating manual
Senis
Senis 3MTS Operation manuals
Gentec-EO
Gentec-EO TPM-300-CE instruction manual
Emerson
Emerson Rosemount 753R Reference manual
ICS Schneider Messtechnik
ICS Schneider Messtechnik Snap 41 Instruction Manual and Safety Information
Rohde & Schwarz
Rohde & Schwarz VSE-K149 user manual
LaMotte
LaMotte DC1500 Copper manual
Bartec
Bartec RLAnet 17-85G5-2123 Series Operation and installation manual
Oakton
Oakton ORPTestr 5 Operator's manual
Amptec Research
Amptec Research 620A SERIES Operation and maintenance manual
LUDLUM
LUDLUM MODEL 2241-2 Technical manual
Anritsu
Anritsu Bit Master MP1026B Programming manual
