AIR-EAGLE®FM2
900 MHz RF Transmitter
REMOTE STOP SWITCH
43-1100R2-DC
DIMENSIONS & INDICATORS
Top View
Side View
5.50 "
6.30"
POWER
CH1
Power Input cable
STOP
PUSHBUTTON
CH2
CH1 LED –Not used.
POWER LED –Green LED illuminates continuously while power is
applied to the transmitter.
CH2 LED –Red LED illuminates continuously when the
contact input for Channel 1 is closed.
SPECIFICATIONS
Power Supply 9 –36 VDC @ 10 Watts
Fuse Protected 2 amp
Transmitter Data Two DRY Contact Inputs (Pre-wired to
Pushbutton)
Transmit Frequency 900MHz Spread Spectrum
RF Channels Four independent network frequencies
RF Output Power 4mW
Transmit Range Up to 1200 feet with external antenna -
see accessories)
Enclosure ABS Plastic, NEMA 3, 3R, 4, 4X, 12, 13
Operating Temp -40oF - +185oF
REPLACEMENT PARTS & ACCESSORIES
PC Board (Main) 43-1102R2-DC
Standard Antenna (Included):
900MHz TNC Portable Antenna (For
distances up to 600 feet*) 49-1103
Optional Antenna & Accessories:
900MHz Omni Directional Base Antenna
(For distances up to 1200 feet*) 49-3101
Flex Coax Cable w/Connectors 49-4000-XX
(XX = # of Feet)
Inline Lightning Arrestor 49-5002
* = Line of Sight
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly
used and installed, will be free from defects in material and workmanship
for a period of 1 year after date of purchase. Said warranty to include the
repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with
electrical power, usage not in accordance with product instructions,
misuse, neglect, alteration, repair, improper installation, orimproper
testing. This limited warranty, and any implied warranties that may exist
understate law, apply onlyto the original purchaser of the equipment, and
last only for as long as such purchasercontinues to own the equipment.
This warranty replaces all other warranties, express or implied including,
but not limited to, the implied warranties ormerchantability and fitness for
a particular purpose. BWI Eagle makes no express warranties beyond
those stated here. BWI disclaims without limitation, impliedwarranties of
merchantability and fitness for a particular purpose. Some jurisdictions do
not allowthe exclusion of implied warranties so this limitation may not
apply to you. To obtain warranty service, contact BWI Eagle for a return
material authorization. When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss during shipping and is
responsible forthe shipping costs incurred.
DOCUMENT DATE: 12-May-06
238 Pillow Street
Butler, PA 16001
(724) 283-4681
Fax (724) 283-5939
www.bwieagle.com
