BWI Eagle AIR-EAGLE FM2 43-1000-BAT Manual

PRODUCT INFORMATION
BULLETIN
238 Pillow Street
Butler, PA 16001
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE®FM2
900 MHz RF Transmitter
DUAL CONTACT INPUT
MODEL 43-1000-BAT
DESCRIPTION
The model 43-1000-BAT, AIR-EAGLE FM2 TX IS a dual contact input
R.F. transmitter designed to transmit unique signals to any AIR-EAGLE
FM2 RECEIVER which can be located up to 1200 feet away. This model
comes equipped with a terminal strip for ease of interfacing with any
external dry contact input devices such as tilt switches, flow switches,
speed switches etc. The internal batteries allow the transmitter to be
operated in areas without a power source.
PC BOARD SET-UP INFORMATION
Make the following connections on the PC Board Terminal Strip:
DC INPUT TERMINAL STRIP (DC IN)
Terminal 1 Positive (+) 6VDC from internal batteries
Terminal 2 Negative (-) 6VDC from internal batteries
INPUT 1 TERMINAL STRIP (INP1)
Terminal 1 CH1 Dry Contact Input (+)
Terminal 2 CH1 Dry Contact Input (Common)
Terminal 3 CH2 Dry Contact Input (Common)
Terminal 4 CH2 Dry Contact Input (+)
I/O TERMINAL STRIP (TERM2)
Terminal 1 Not Used On This Model
Terminal 2 Not Used On This Model
Terminal 3 Not Used On This Model
Terminal 4 Not Used On This Model
NETWORK SWITCH TERMINAL STRIP (NSW1)
Terminal 1 Not Used On This Model
Terminal 2 Not Used On This Model
NETWORK SWITCH CONFIGURATION OPTIONS
(SEL1)
Network
Address SW1 SW2
#1 OPEN OPEN
#2 CLOSED OPEN
#3 OPEN CLOSED
SEL 1 (SW1 & 2):
USED TO SET
NETWORK
FREQUENCY
#4 CLOSED CLOSED
Dc Power Input Module
Open
Closed
SEL1
2
amp
+-
DC IN
INP1 TERM2
1 2 341 2 34
NSW1
12

AIR-EAGLE®FM2
900 MHz RF Transmitter
DUAL CONTACT INPUT
MODEL 43-1000-BAT
DIMENSIONS & INDICATORS
Top View
Side View
CH1 CH2
Input
5.50 "
6.30"
Power
CH1 LED –Red LED illuminates continuously when the
contact input for Channel 1 is closed.
POWER LED –Green LED illuminates continuously while power is
applied to the transmitter.
CH2 LED - Red LED illuminates continuously when the contact input
for Channel 2 is closed.
SPECIFICATIONS
Power Supply 6 VDC from internal batteries
Fuse Protected 2 amp
Transmitter Data Two DRY Contact Inputs
Transmit Frequency 900MHz Spread Spectrum
RF Channels Four independent network frequencies
RF Output Power 4mW
Transmit Range Up to 1200 feet with external antenna -
see accessories)
Enclosure ABS Plastic, NEMA 3, 3R, 4, 4X, 12, 13
Operating Temp -40oF - +185oF
REPLACEMENT PARTS & ACCESSORIES
PC Board (Main) 43-1002-BAT
Standard Antenna (Included):
900MHz TNC Portable Antenna (For
distances up to 600 feet*) 49-1103
Optional Antenna & Accessories:
900MHz Omni Directional Base Antenna
(For distances up to 1200 feet*) 49-3101
Flex Coax Cable w/Connectors 49-4000-XX (XX = # of Feet)
Inline Lightning Arrestor 49-5002
* = Line of Sight
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly
used and installed, will be free from defects in material and workmanship
for a period of 1 year after date of purchase. Said warranty to include the
repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with
electrical power, usage not in accordance with product instructions,
misuse, neglect, alteration, repair,improperinstallation, or improper
testing. This limited warranty, and any implied warranties that may exist
understate law, apply onlyto the original purchaser ofthe equipment, and
last only for as long as such purchasercontinues to own the equipment.
This warranty replaces all other warranties, express or implied including,
but not limited to, the implied warranties or merchantability and fitnessfor
a particular purpose. BWI Eagle makes no express warranties beyond
those stated here. BWI disclaims without limitation, implied warranties of
merchantability and fitness for a particular purpose. Some jurisdictions do
not allowthe exclusion of implied warranties so this limitation may not
apply to you. To obtain warranty service, contact BWI Eagle fora return
material authorization.When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss during shipping and is
responsible fortheshipping costs incurred.
DOCUMENT DATE: 12-Jun-06
238 Pillow Street
Butler, PA 16001
[phone]
Fax [phone]
www.bwieagle.com