Caltrend CR159 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part#CR159
Row: Rear-50/50 Split Bench
Application Available for: Chrysler PT Cruiser
Convertible 2002-2009
Parts included:
Backrests-3
Bottom Cushion-2

Part#CR159 Rear- 50/50 Split Bench
Step #1- Prepare Seats
Step#2- Install 50% Backrest
Step #3- Install 50% Backrest
Step#4-Install Backrest
Place the cover onto the backrest but
under the safety restraints, matching its
contours and cutouts. Tuck in the plastic
on top of the backrest. Secure the seat
belt cutout by attaching the velcros
together.
Step#5- Install Backrest
Secure the bottom by tucking in the clips
and hooking them into the backrest.
Step#6- Install Cushion
Place the cover over the backrest, matching
its contours and cutouts. Tuck in the top
piece of the cover, sending the buckles to
the back. Pull the buckles through the back.
Also tuck in the sides of the cushion, sending
the buckle and strap underneath the seat.
Step#7- Install Cushion
Fold the rear seat back down flat. Pull the
release handle located at the bottom of
the folded seat back and tumble the seat
forward. Buckle the straps accordingly,
make sure to pull on the straps tightly so
the cover is well fitted.
Step#8- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry. NEVER
MACHINE WASH OR DRY. The
material may come apart from
lamination or foaming. This will
also void any warranty.***
The seat back release
knobs are located in the
trunk area. Pull them to
release the backrest.
Place the cover over the
backrest but under the
safety restraints,
matching its contours
and cutouts. Tuck in the
bottom, sending the
velcro to the back.
Once all covers have been installed
adjust the seating and headrests to
their regular position. Tuck all straps
underneath the seating. Now you are
ready to enjoy your CalTrend Seat
Covers 
Pull the velcro
through the
backrest, and secure
the fit by attaching
the valcros together.