Caltrend CV580 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part#CV580
Row: Front Buckets
Application Available for: Chevrolet Traverse 2013-
2017, Buick Enclave 2013- 2016
Parts included:
Backrests-2 Headrest- 2
Bottom Cushion-2

Part# CV580- Front Buckets
Step #1- Prepare Seats
Remove the headrest from its mounts,
and place it aside.
Step#2-Install Backrest
Step#3- Install Backrest
Step#4-Install Cushion
Place the cover onto the cushion, matching
its contours and cutouts. Tuck in the top,
and stick the velcro onto the carpet, and
send the straps to the back. Also tuck in the
front and sides, sending the buckles and
strap under the seat.
Step#5- Install Cushion
Pull the straps from the back, and
buckle them accordingly. Make sure to
pull on the straps tightly, so the cover is
well fitted.
Step#6- Install Headrest
Place the cover over the headrest,
matching its contours, and cutouts. Make
sure to place the solid piece on the front
side of the headrest.Secure the fit by
attaching the velcros together. Then tuck in
the cutout
Step#7- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry.
NEVER MACHINE WASH OR
DRY. The material may come
apart from lamination or
foaming. This will also void
any warranty.***
Grab the velcro,
and stick it onto
the carpet.
Place the cover
over the backrest,
matching its
contours and
cutouts. Tuckin the
bottom, and stick
the velcro onto the
carpet. Make sure
to tuck in the flaps,
located on the sides
of the cover. Also
tuck in the “X”
cutouts.
Once all covers have
been installed adjust
the seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you are
ready to enjoy your
CalTrend Seat Covers
