Caltrend JP113 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part#JP113
Row: Rear- Solid Bench
Application Available for: Jeep Wrangler 1997-2002
Parts included:
Backrests-1
Bottom Cushion-1

Part# JP113 Rear- Solid Bench
Step #1- Prepare Seats
Remove the headrest from its mounts,
and place it aside.
Step #2-Install Backrest
Step #3- Install Backrest
Step#4- Install Cushion
Place the cover onto the cushion, matching
its contours and cutouts. Tuck in the top,
sending the buckles to the back.
Step#5- Install Cushion
Pull the buckles from the back, and
buckle the straps accordingly, make sure
to pull on the straps tightly, so the cover
is well fitted.
Step#6- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry.
NEVER MACHINE WASH OR
DRY. The material may come
apart from lamination or
foaming. This will also void
any warranty.***
Pull the velcro to through the back, and
secure the fit by attaching the velcros
together.
Place the cover over the backrest,
matching its contours and cutouts. Tuck
in the bottom, sending the velcro to the
back.
Once all covers have been installed
adjust the seating and headrests to their
regular position. Tuck all straps
underneath the seating. Now you are
ready to enjoy your CalTrend Seat Covers
