Caltrend LY115 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part# LY115
Row: Rear- 60/40 Split Bench
Application Available for: Lexus GX470 2003-2009
Parts included:
Backrests-2 Headrest-3
Bottom Cushion-2 Console-1

Part# LY115 Rear- 60/40 Split Bench
Step #1- Prepare Seats
Remove headrest from mounts and
set them aside.
Step #2-Install 60% Backrest
Step #3 Install 60% Backrest
Step#4- Install 40% Backrest
Step#5- Install Both Cushions
Place the cover onto the cushion,
matching its contours, and cutouts. Then
tuck in the top piece of the cover, sending
the buckles to the back..
Step#6 Install Both Cushions
Pull the seat lock at the bottom of the seat and
lift up the seat. Buckle the straps accordingly,
make sure to pull on the straps tighly, so that
the cover is well fitted.
Step#7- Install Headrest
Place the cover over the headrest,
matching its contours, and cutouts.
Make sure the solid piece is facing the
front. Then secure the fit with the
velcro.
Step#8- Install Console
Open up the console, and place the cover
over the console, matching its contours,
and cutouts. Tuck in the bottom pice of
the cover, sending the velcro to the back.
Pull the velcro through the back and
secure the fit by attaching the velcros
together.
Step#9- Finishing Touch
Place the cover
over the backrest,
but under the
safety restraint,
matching its
contours, and
cutouts. Tuck in
the bottom piece
of the cover,
sending the velcro
to the back.
Zip the zipper down,
and pull the lever on
the side of the
cushion, to bring the
backrest forward.
Then pull through the
velcro through the
back. Secure the fit
by attaching the
velcros together.
Tuck in the plastics
on the side as well.
Place the cover over
the backrest,
matching its
contours, and
cutouts. Tuck in the
bottom piece of the
cover, sending the
velcro to the back.
Pull the lever on the
side to bring the seat
forward. Secure the
fit with the velcros.
Once all covers have been installed adjust
the seating and headrests to their regular
position. Tuck all straps underneath the
seating. Now you are ready to enjoy your
CalTrend Seat Covers 

**Enjoy your CalTrend Seat Covers***
***In case of dirty or stained covers
hand wash with mild detergent and air
dry. NEVER MACHINE WASH OR DRY.
The material may come apart from
lamination or foaming. This will also
void any warranty.***