Caltrend FD332 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part#FD332
Row: Front Buckets
Application Available for: Ford Edge, Lincoln MKX
2007-2010
Parts included:
Backrests-2 Headrest-2
Bottom Cushion-2

Part#FD332- Front Buckets
Step #1- Prepare Seats
Remove headrest from mounts and set
them aside.
Step #2- Install Backrest
Step #3-Install Backrest
Pull the velcro through the back, and
secure the fit by attaching the velcros
together.
Step #4- Install Cushion
Place the cover onto the cushion, matching its
contours and cutouts. Tuck in the top, sending
the buckles to the back.
Step #5- Install Cushion
Pull the buckle through the back, and
buckle the straps accordingly. Make sure to
pull on the straps tightly, so the cover is
well fitted. Also tuck in the sides of the
cover.
Step #6- Install Headrest
Place the cover over the headrest,
matching its contours and cutouts.
Make sure the solid piece is facing the
front. Secure the fit by attaching the
velcros together.
Step #7- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry. NEVER
MACHINE WASH OR DRY. The
material may come apart from
lamination or foaming. This
will also void any warranty.***
Place the cover over
the backrest,
matching its
contours and
cutouts. Tuck in the
bottom, sending the
velcro to the back.
Also tuck in the “X”
cutouts. Make
sureto tuck in the
flap located on the
side of the backrest.
Once all covers have
been installed adjust
the seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you are
ready to enjoy your
CalTrend Seat Covers
