Caltrend JP212 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part# JP212
Row: Front Buckets
Application Available for: Jeep Wrangler 2011-2012
Parts included:
Backrests-2 Headrest-2
Bottom Cushion-2

Part# JP212 –Front Buckets
Step #1- Prepare Seats
Remove the headrest from its mounts,
and place it aside.
Step #2-Install Backrest
Step #3- Install Backrest
Step#4- Install Cushion
Place the cover onto the cushion, matchin
gits contours and cutouts. Tuck in the top,
sending the buckles, and velcro to the back.
Also tuck in the sides of the cushion, sending
the strap and buckle underneath the seat.
Step#5- Finish installing Backrest
Step#6- Install Headrest
Place the cover over the headrest,
matching its contours and cutouts. Make
sure the solid piece is facing the front. Then
secure the fit by attaching the velcros
together.
Step#7- Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry.
NEVER MACHINE WASH OR
DRY. The material may come
apart from lamination or
foaming. This will also void
any warranty.***
Once all covers
have been
installed adjust the
seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you
are ready to enjoy
your CalTrend Seat
Covers 
Pull the velcro through the back, and
secure the fit by attaching the velcros
together.
Place the cover
over the
backrest,
matching its
contours and
cutouts. Tuck in
the the bottom,
sending the
velcro to the
back.
Pull the buckles from the back, and stick
the velcro ont the carpet. Buckle the
straps accordingly, make sure to pull on
the straps tightly, so the cover is well
fitted.