Part# DG264 Front- 40/20/40 Split Bench
Step #1- Prepare Seats
Remove the headrest from its mounts,
and place it aside.
Step #2-Install 40% Backrest
Step #3- Install 40% Backrest
Step#4-Install 40% Cushion
Place the cover over the cushion, matching
its contours and cutouts. Tuck in the top,
sending the buckles to the back Stick the
velcro onto the carpet. Also tuck in the side
of the cover, sending the strap and buckle
underneath the seat.
Step#5- Install 40% Cushion
Pull the buckles from the back. Buckle
the straps accordingly, make sure to pull
on the straps tightly, so the cover is well
fitted.
Step#6- Install Headrest
Place the cover over the headrest,
matchign its contours and cutouts. Make
sure the solid piece is facing the front.
Secure the fit by attaching the velcros
together.
Step#7- Install Opening Armrest
Place the cover onto the bottom of the
armrest, matching its contours and cutouts.
Tuck in the botton, sending the rest of the
cover to the back. Pull the rest of the cover
from the back, and place it over the lid.
Secure everything with the velcros.
Step#8- Install Solid Armrest
Place the cover over the armrest,
matching its contours and cutouts. Tuck
in the bottom, sending the velcro to the
back. Pull the velcro from the back, and
secure the fit by attaching the velcros
together.
Step#9- Install 20% Cushion with under
seat storage
Open up the underseat storage, and place
the cover over the cushion. Matching its
contours and cutouts, tuck in the bottom,
sending the velcro to the back. Pull the
velcro from the back and secure the fit by
attaching the velcros together.
Pull the velcro to
through the back,
and secure the fit
by attaching the
velcros together.
Place the cover
over the backrest,
matching its
contours and
cutouts. Tuck in
the bottom,
sending the velcro
to the back. Make
sure to tuck in the
“X” cutouts.
