Canon AX-C4343W Technical manual

Digital X-ray Imager
Technical Document
AX-C4343W
2.4 GHz/5 GHz
000_DIA-2019-019-E03_AX-C4343W.book Page 1 Friday, November 27, 2020 12:38 PM

2
1. This product complies with local radio frequency regulations in the country or region
where you purchased the product. Note that it cannot be used in any other areas.
When using the product, follow the notes on radio frequency in this document.
2. The product shall be maintained in a safe and operable condition by maintenance
personnel.
3. In the case of a network connection, the appropriate network address must be
acquired from the network administrator in the installation location, and it must be set
correctly.
4. Use only the dedicated cables. Do not use the cables with other equipment. Do not
use any cables other than those supplied with the product.
1. In no event shall Canon be liable for any damage or loss arising from fire, earthquake,
any action by a third party or other accidents, any intentional or negligent action by
users, any trial usage, or other usage under abnormal conditions.
2. Roentgenography, image processing, image reading, and image data storage must be
performed in accordance with the laws of the country or region in which the product is
being used. The user is responsible for maintaining the privacy of image data.
3. In no event shall Canon be liable for personal physical harm or property damage that
is sustained when the instructions are not followed or the product is misused.
• Disposal of this product in an unlawful manner may have a negative impact on human
health and on the environment. Therefore, when disposing of this product, be absolutely
certain to follow the procedure which conforms with the laws and regulations applicable
to your area.
To customers
Important information on usage and management of
the product
Disclaimer
Notes on disposal of the product
USA and Canada only:
The Lithium ion/polymer battery is recyclable. Please call 1-800-8-BATTERY
for information on how to recycle this battery.
Le Canada et les Etats-Unis seulement :
La batterie aux ions de lithium est recyclable. Pour obtenir des
renseignements sur les façons de recycler cette batterie, veuillez appeler au
1-800-8-BATTERY.
000_DIA-2019-019-E03_AX-C4343W.book Page 2 Friday, November 27, 2020 12:38 PM

3
To customers.......................................................................................2
Conventions.........................................................................................5
1 Safety information ...............................................................................7
1.1 Safety precautions.........................................................................8
1.2 Notes on radio frequency ............................................................17
1.3 Notes for using the product.........................................................22
2 Introduction .......................................................................................23
Features ..............................................................................................24
3 Parts names and functions ...............................................................25
3.1 Detector ......................................................................................26
3.2 Multi Box.....................................................................................29
3.3 X-ray interface unit ......................................................................29
3.4 Battery pack / Docking Station / Battery charger.........................30
3.5 Status indicator ...........................................................................30
3.6 Ready indicator ...........................................................................30
4 Operating procedures .......................................................................33
4.1 Preparing to use the detector ......................................................34
4.2 Operating the detector ................................................................36
4.3 Ending use of the detector ..........................................................40
4.3.1 Return the detector to the Docking Station.........................40
4.3.2 Remove the battery pack and store the detector................40
4.4 List of detector status indication ..................................................41
4.5 List of lights / flashes / notification beeps of the ready indicator ...42
4.6 Attaching the ready indicator / exchanging a hook-and-loop
fastener .......................................................................................43
4.6.1 Removing the hook-and-loop fastener from the ready
indicator and attachment position ......................................43
4.6.2 Attaching the ready indicator behind the monitor of
a laptop computer..............................................................43
4.6.3 Attaching a ready indicator to a wall or post .......................44
5 Extension facility ...............................................................................47
5.1 Wired configuration (Standard Synchronization Mode) .................48
5.2 Wired configuration (Non Generator Connection Mode) ...............48
6 Troubleshooting ................................................................................49
7 Maintenance ......................................................................................51
Contents
000_DIA-2019-019-E03_AX-C4343W.book Page 3 Friday, November 27, 2020 12:38 PM

Contents
4
Maintenance and inspection ................................................................52
8 Specifications ....................................................................................53
Main specifications ..............................................................................54
9 Regulatory information......................................................................57
9.1 Device classification.....................................................................58
9.2 Labels and markings on the detector...........................................59
10 Dimensional diagram.........................................................................61
11 Product components.........................................................................63
12 Guidance and manufacturer’s declaration for EMD ........................65
EMD (Electromagnetic Disturbances) ...................................................66
Electromagnetic emissions ..................................................................67
Electromagnetic immunity....................................................................68
Recommended separation distances...................................................70
Appendix — Optional part — .................................................................71
PC Connection Cable ..........................................................................72
Appendix — Technical description — ...................................................75
1 Important information on usage and management of the product ...76
2 Operating/storage environment ......................................................76
3 Power supply and cables................................................................77
4 Modifications ..................................................................................77
5 Communication specifications ........................................................78
5.1 Wireless communication specifications...................................78
5.1.1 Communication system...............................................78
5.1.2 Communication environment.......................................78
5.1.3 RF transmitter specification .........................................78
5.1.4 Supplementary matter about wireless
communication specifications .....................................79
5.1.5 Channel setting guidelines...........................................79
5.2 Infrared LINK communication specifications ...........................82
5.2.1 Communication timeout ..............................................82
5.2.2 Communication environment.......................................82
6 Other items to be installed ..............................................................82
7 Installation, repair and maintenance check .....................................82
7.1 License for service engineer ...................................................82
7.2 Installation procedures ...........................................................82
7.3 Installation restrictions ............................................................83
7.4 Installation-related precautions ...............................................83
8 EMD (Electromagnetic Disturbances)..............................................84
000_DIA-2019-019-E03_AX-C4343W.book Page 4 Friday, November 27, 2020 12:38 PM

5
The following safety messages are used to emphasize certain safety instructions. This
document uses the safety alert symbol along with a safety message.
Conventions
Safety symbols
WARNING
This is used to identify conditions under which improper use of
the product may cause death or serious personal injury. Pay
attention to the warning message.
CAUTION
This is used to identify conditions under which improper use of
the product may cause minor personal injury. Pay attention to
the caution message.
CAUTION
This notice is used to identify conditions under which improper
use of the product may cause property damage. Pay attention
to the caution message.
This is used to indicate a prohibited operation.
This is used to indicate an action that must be performed.
This is used to indicate important instructions that must be
followed and restrictions. Be sure to read the notices to avoid
property damage or malfunction of the product and other
equipment, and to avoid incorrect operations.
This is used to indicate operations for reference and
complementary information. Users are recommended to read
this notice.
Prohibited
Important
Information
000_DIA-2019-019-E03_AX-C4343W.book Page 5 Friday, November 27, 2020 12:38 PM

Conventions
6
000_DIA-2019-019-E03_AX-C4343W.book Page 6 Friday, November 27, 2020 12:38 PM

1 Safety information
The precautions described in this chapter prevent users and others from suffering damage or loss.
000_DIA-2019-019-E03_AX-C4343W.book Page 7 Friday, November 27, 2020 12:38 PM

1Safety information
8
Follow these safeguards and properly use the product to prevent injury and damage to any
equipment/data.
1.1 Safety precautions
WARNING
Operating/storage environment
• Do not use or store the product near flammable chemicals such as
alcohol, thinner, benzine, etc.
If chemicals are spilled or evaporate, it could result in fire or electric shock
through contact with electric parts inside the product. Also, some
disinfectants are flammable. Be sure to take care when using them.
• Do not connect the equipment with anything other than specified.
Doing so could result in fire or electric shock.
Power supply and cables
• Do not operate the product using any type of power supply other than
the one indicated on the rating label.
Otherwise, it could result in fire or electric shock.
• Do not handle the product with wet hands.
You may experience an electric shock that could result in death or serious
injury.
• Do not place heavy object on cables and cords, or do not pull, bend,
bundle, or step on them to prevent their sheath from being damaged,
and do not alter them neither.
Doing so may damage the cords which could result in fire or electric shock.
• Do not supply power to more than one piece of equipment using the
same AC outlet.
Doing so could result in fire or electric shock.
• Do not turn ON the power when condensation has formed on the
product.
Doing so could result in fire or electric shock.
• Do not connect a multiple portable socket-outlet or extension cord to
the system.
Prohibited
Prohibited
000_DIA-2019-019-E03_AX-C4343W.book Page 8 Friday, November 27, 2020 12:38 PM

1Safety information
9
• Always connect the three-core power cord plug to a grounded AC
power outlet.
• Securely plug the power cord into the AC outlet.
If contact failure occurs or the exposed metal prongs of the plug get dusty or
have contact with metal objects, fire or electric shock could result.
• Be sure to turn OFF the power to the product before connecting or
disconnecting the cords.
Otherwise, you may get an electric shock that could result in death or
serious injury.
• Be sure to hold the plug or connector to disconnect the cord.
If you pull the cord, the core wire may be damaged, resulting in fire or
electric shock.
Handling
• Never disassemble or modify the product.
Doing so could result in fire or electric shock. Also, since the product
incorporates parts that may cause electric shock as well as other hazardous
parts, touching them may cause death or serious injury.
• Do not place anything on top of the product.
The object may fall and cause an injury. Also, if metal objects such as
needles or clips fall into the product, or if liquid is spilled, it could result in
fire or electric shock.
• Do not hit or drop the product.
The product may be damaged if it receives a strong jolt, which could result in
fire or electric shock if the product is used without being repaired.
• Always confirm that there is no problem with the system during use. If
a problem occurs, take appropriate measures, such as shutting down
the system.
WARNING
Prohibited
000_DIA-2019-019-E03_AX-C4343W.book Page 9 Friday, November 27, 2020 12:38 PM

1Safety information
10
When a problem occurs
• Should any of the following occur, immediately turn OFF the power to
the product, unplug the power cord from the AC outlet, and contact
your sales representative:
– When there is smoke, an odd smell or abnormal sound
– When liquid has been spilled into the product or a metal object has entered
through an opening
– When the product has been dropped and is damaged
Inspection, disinfection, and cleaning
• Do not use flammable solvents to clean the surface of the product.
When the product is going to be cleaned, be sure to turn OFF the power to
the product, remove the battery pack, and unplug the power cord from the
AC outlet. Never use alcohol, benzine, thinner or any other flammable
solvents. Otherwise, it could result in fire.
• Clean the plug of the power cord periodically by unplugging it from
the AC outlet and removing dust or dirt from the plug, its periphery
and AC outlet with a dry cloth.
If the cord is kept plugged in for a long time in a dusty, humid or sooty place,
dust around the plug will attract moisture, and this could cause insulation
failure that could result in a fire.
• For safety reasons, be sure to turn OFF the power to the product
when the inspections of the product and cables are going to be
performed.
Otherwise, electric shocks may occur.
• The product must be repaired by a qualified engineer only.
If it is not repaired properly, it could result in fire, electric shock, or accident.
WARNING
Prohibited
000_DIA-2019-019-E03_AX-C4343W.book Page 10 Friday, November 27, 2020 12:38 PM