Canon Laser Shot LBP6750dn User manual

A
B
E
F
User Manual CD-ROM
User Software CD-ROM
C
D
OFF
OFF
B
OFF
OFF
C
ON
ON
100BASE-TX
10BASE-T
(A)
D
(A)
5 cm or less
SPA 5 cm o menos
KOR 5cm 㢨䚌
POR 5 cm ou menos
E
(mm)
69
454
129 121
173424397
315
323 19
31
342
A
SPA Lea esta guía primero.
Por favor, lea esta guía antes de usar este producto.
Después de leer esta guía, guárdela en un lugar
seguro para posteriores consultas.
POR Leia este manual primeiro.
Leia este manual antes de utilizar o produto.
Após ter lido o manual, guarde-o em um local
seguro para consultas futuras.
KOR ⭰㤴G⸬G㉘⮹㉐⪰G㢱㛨G㨰㐡㐐㝘U
G G ⸬G㥐䖼㡸G㇠㟝䚌ὤG㤸㜄G㉘⮹㉐⪰G㢱㛨G㨰㐡㐐㝘U
G G ⸬G㉘⮹㉐⪰G␘G㢱㡴G䟸G⇌㩅㜄G㵬Ḕ䚔G㍌G㢼⓸⦑G㙼㤸䚐G
ḧ㜄G⸨Ḵ䚌㐡㐐㝘U
SPA Las precauciones para instalar la impresora de modo
seguro se describen en el reverso.
Lea atentamente las precauciones antes de llevar a cabo
la instalación.
POR As precauções para a instalação segura estão descritas
na parte posterior da impressora.
Antes da instalação, leia com cuidado as precauções.
KOR 䘸⫤䉤⪰G㙼㤸䚌󰵡G㉘㾌䚌ὤG㠸䚐G㨰㢌㇠䚡㡴G◫⮨㜄G䖐㐐╌㛨G
㢼㏩⏼␘U
G G ㉘㾌G㤸㜄G㨰㢌㇠䚡㡸G㣌G㢱㛨G㨰㐡㐐㝘U
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
Confirm the supplied accessories.
Remove the packing materials. Move the printer.
SPA Verifique los accesorios
suministrados.
SPA Retire los materiales de embalaje.
KOR ⺴㋁═G㚕㉬㉐⫠⪰G䞉㢬䚨G
㨰㐡㐐㝘U
KOR 䔠㣙㣠⪰G㥐ᶤ䚝⏼␘U
POR Confirme os acessórios
fornecidos.
Load paper.
Connect the power cord.
SPA Desplace la impresora. KOR 䘸⫤䉤⪰G㢨┍㐐䇩⏼␘U POR Mude a impressora de lugar.
SPA ¿Ha retirado todos los materiales
de embalaje?
KOR ⯜☔G䔠㣙㣠⪰G㥐ᶤ䚼㏩⏼ᾀf POR Você removeu todos os materiais da
embalagem?
Check!
Did you remove all the packing materials?
Connect the printer and computer.
SPA Conecte la impresora y el
ordenador.
KOR 䘸⫤䉤㝴G䀨䘜䉤⪰G㜤󰶅䚝⏼␘U POR Conecte a impressora e o
computador.
The precautions to install the printer safely are described on the back side.
Before the installation, read the precautions carefully.
* English sample
SPA Configure los ajustes de red.
Consulte el e-Manual.
KOR ≘䏬㠀䆠G㉘㥉GẠ㉥䚌ὤU
㤸㣄㉘⮹㉐⪰G㵬㦤䚌㐡㐐㝘U
POR Definir as configurações da rede.
Consulte o manual eletrônico.
POR Remova o material de embalagem.
LAN
2
1
Configure the network settings. See the e-Manual.
USB
KOR ᴸ䓬G㉘㾌G㙼⇨㉐ POR Guia de Instalação RápidaSPA Guía de instalación rápida
SPA Hasta aquí
KOR 㜠ὤᾀ㫴
POR Até aqui
Up to here
SPA Cargue papel. KOR 㟝㫴⪰G≗㏩⏼␘U POR Carregue o papel.
SPA Conecte el cable de alimentación. KOR 㤸㠄G䂈☐⪰G㜤󰶅䚝⏼␘U POR Conecte o cabo de energia.
1
2
4
5
3 6
7
RT5-0565 (000) XX2010XXXX © CANON INC. 2010 PRINTED IN VIETNAM
Quick Setup Guide

E
F
This manual describes only warnings and cautions for the installation and the power
supply. Be sure to read "Important Safety Instructions" described in the e-Manual
(HTML manual) included in the supplied User Manual CD-ROM also.
Important Safety Instructions
User Manual CD-ROM
Symbols English
KOR
Installation
Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use the
machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury
to persons if not performed correctly. To use the machine safely,
always pay attention to these cautions.
- Do not install the printer in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with
electrical parts inside the printer, this may result in a fire or electrical
shock.
- Do not place the following items on the printer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or
liquids
If these items come into contact with a high-voltage area inside the
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn
OFF the power switch (1) and disconnect the interface cables if they are
connected (2). Then, unplug the power plug from the AC power outlet (3)
and contact your local authorized Canon dealer.
- When installing or removing the optional accessories, be sure to turn the
printer OFF, unplug the power plug, and then disconnect all the interface
cables and power cord from the printer. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical shock.
Power Supply
- Do not damage or modify the power cord. Also, do not place heavy
objects on the power cord or pull on or excessively bend it, as this can
cause electrical damage, resulting in fire or electrical shock.
- Keep the power cord away from all heat sources. Failure to do so can
cause the power cord insulation to melt, resulting in a fire or electrical
shock.
- The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.
- The power cord may become damaged if it is stepped on, fixed with
staples, or if heavy objects are placed on it. Continued use of a
damaged power cord can lead to an accident, such as a fire or electrical
shock.
- Do not plug or unplug the power plug with wet hands, as this can result
in electrical shock.
- Do not plug the power cord into a multi-plug power strip, as this can
result in a fire or electrical shock.
- Do not bundle up or tie up the power cord in a knot, as this can result in
a fire or electrical shock.
- Insert the power plug completely into the AC power outlet. Failure to do
so can result in a fire or electrical shock.
- If excessive stress is applied to the connection part of the power cord, it
may damage the power cord or the wires inside the machine may
disconnect. This could result in a fire. Avoid the following situations:
- Connecting and disconnecting the power cord frequently.
- Tripping over the power cord.
- The power cord is bent near the connection part, and continuous stress
is being applied to the power outlet or the connection part.
- Applying a shock to the power connector.
- Do not use power cords other than the one provided, as this can result in
a fire or electrical shock.
- As a general rule, do not use extension cords. Using an extension cord
may result in a fire or electrical shock.
- Do not install the printer in unstable locations, such as on unsteady
platforms or inclined floors, or in locations subject to excessive
vibrations, as this may cause the printer to fall or tip over, resulting in
personal injury.
- The ventilation slots are provided for proper ventilation of working parts
inside the printer. Never place the printer on a soft surface, such as a
bed, sofa, or rug. Blocking the slots can cause the printer to overheat,
resulting in a fire.
- Do not install the printer in the following locations, as this may result in a
fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or
humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- When installing the printer, gently lower the printer to the installation site
so as not to catch your hands between the printer and the floor or
between the printer and other equipment, as this may result in personal
injury.
- When connecting the interface cable, connect it properly by following the
instructions in the e-Manual. If not connected properly, this may result in
malfunction or electrical shock.
- Be careful when handling the main board and optional accessories
(RAM and ROM). Touching the edges or a sharp portion of the main
board, RAM, and ROM may result in personal injury.
- When moving the printer, follow the instructions in the e-Manual to hold it
correctly. Failure to do so may cause you to drop the printer, resulting in
personal injury.
- Do not use a power supply voltage other than that listed herein, as this
may result in a fire or electrical shock.
- Always grasp the power plug when unplugging the power plug. Do not
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
- Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
Install the driver.
Register a paper size.
SPA Compruebe el funcionamiento.
SPA A continuación, consulte el
e-Manual.
KOR 㣅┍㡸G䞉㢬䚝⏼␘U
KOR ␘㢀㡰⦐G㤸㣄㉘⮹㉐⪰G㵬㦤䚨G
㨰㐡㐐㝘U
POR Verifique a operação.
POR Em seguida, consulte o manual
eletrônico.
SPA Instale el controlador. KOR ☐⢰㢨ⶸ⪰G㉘㾌䚝⏼␘U POR Instale o driver.
Check the operation.
Next, see the e-Manual.
Setup finished.
SPA Instalación finalizada. KOR ㉘㾌ᴴG㝸⨀╌㛼㏩⏼␘U POR Instalação concluída.
To avoid the risk of personal injury or damage to the printer,
and for legal information, make sure to read the "Legal
Notices" and "Important Safety Instructions" in the e-Manual
included on the accompanying User Manual CD-ROM
carefully before using the printer.
㢬㤵G⺴ㇵG❄⏈G䘸⫤䉤㢌G㋄ㇵ㡸G䙰䚌ὤG㠸䚨㉐SGἬ⫠ḔGⷉ㤵G
㥉⸨㜄GḴ䚨㉐⏈G䘸⫤䉤G㇠㟝G㤸㜄G⺴㋁═G|GtGjkTyvt
㜄G䔠䚜═G㤸㣄㉘⮹㉐㢌Gˈⷉ㤵GḔ㫴G㇠䚡ˉGⵃGˈ㨰㟈G㙼㤸G㫴㾜ˉ㡸G
㣌G㢱㛨G㨰㐡㐐㝘U
󰶒Ḕ
See the e-Manual.
SPA Registre un tamaño de papel.
Consulte el e-Manual.
KOR 㟝㫴G䆠ὤ⪰G☥⦑䚝⏼␘U
㤸㣄㉘⮹㉐⪰G㵬㦤䚌㐡㐐㝘U
POR Registre um tamanho de papel.
Consulte o manual eletrônico.
* English sample
2
1
SPA Siga las instrucciones de la pantalla. KOR 䞈⮨㢌G㫴㐐㜄G♤⪹⏼␘U POR Siga as instruções na tela.
Follow the instructions on the screen.
If you have any questions about operations, see the Printer Driver Installation Guide.
SPA Si tiene preguntas sobre
las operaciones, consulte
la Guía de instalación del
controlador de impresora.
KOR 㦤㣅㜄GḴ䚨GẵἼ䚐G㥄㢨G
㢼㡰㐐⮨G䘸⫤䉤G☐⢰㢨ⶸG
㉘㾌G㉘⮹㉐⪰G
㵬㦤䚌㐡㐐㝘U
POR Se tiver qualquer pergunta
sobre as operações, consulte
o "Guia de instalação do
driver de impressora".
User Manual CD-ROM
User Manual CD-ROM
POR
Para evitar o risco de ferimentos ou danos à impressora e
para obter informações legais, leia com cuidado as
"Notificações legais" e "Instruções de segurança
importantes" no manual eletrônico incluído no User Manual
CD-ROM fornecido, antes de usar a impressora.
ATENÇÃO
User Manual CD-ROM
SPA
Para evitar el riesgo de sufrir lesiones personales o de causar
daños a la impresora (y para información legal), asegúrese de
leer atentamente los "Avisos legales" y las "Instrucciones de
seguridad importantes" del e-Manual incluido en el disco User
Manual CD-ROM suministrado antes de utilizar la impresora.
ADVERTENCIA
User Manual CD-ROM
7
8
9
10
(2)
(2)
(1)
(1)
(3)