Canon SELPHY SQUARE QX10 User manual
canon
SELPHY
SQUARE
QX10
I
Ill
111111111111111
CTO
-B466
COMPACT
PHOTO
PRINTER
ifffl~B_ij~
1tm
t~J3~
~
1tm~~a~w
(ff
[
A~%~
't:3Ai
Getting Started
Prirucka
Zaciname
Startvejledning
Handbuch Erste Schritte
Guia de inicio
Guide de mise
en
route
Guida introduttiva
Kezdeti lepesek
lntroductiehandleiding
Pierwsze kroki
Guia de lntrodu~ao
Aloitusopas
Starthandbok
Ba§lang•~
K1lavuzu
1'G~UJhu
tih4Gmp4ht
~blC~awa
H¥C~aynbl~
HWTH
6awTOO
Ha'lano
pa6oTbl
noci6HHK
i3
no'laTKY
po60TH
t.;
I
o/1iJI
~.1.1
t.
tJ
(,,;J
-~
ENGLISH
CESKY
DANSK
DE;UTSCH
ESPANOL
FRANCAIS
ITALIANO
MAGYAR
1NEDERLANDS
POLSKI
PORTUGUES
SUOMI
SVENSKA
T0RKCE
Z.l18brb\,
KA3AKWA
Kb1Prbl3l.lA
PYCCKIAl/1
YKPA°iHCbKA
Canon
SELPHV
SQUARE
QX10
COMPACT PHOTO PRINTER
Getting Started
ENGLISH
Make
sure you read this guide, including
the
"Safety
Instructions" (
CO
2) section, before using the printer.
• Reading this guide will help you learn
to
use
the printer properly.
Store this guide safely so that you can use it in
the
future.
I
Safety
Instructions
• Be sure to read these instructions in order to operate the product safely.
• Follow these instructions to prevent injury
or
harm
to
the operator
of
the
product
or
others.
A
WARNING
Denotes the risk
of
serious injury
or
death.
• Use
only
power
sources
specified
in
this
instruction
manual
for
use
with
the
product.
•
Do
not
disassemble
or
modify
the
product.
•
Do
not
expose
the
product
to
strong
shocks
or
vibration.
Do
not
touch
any
exposed internal parts.
Stop
using
the
product
in
any
case
of
unusual
circumstances
such
as
the
presence
of
smoke
or
a strange smell.
Do
not
use
organic
solvents
such
as alcohol, benzine
or
paint
thinner
to
clean
the
product.
•
Do
not
get
the
product
wet. Do
not
insert
foreign
objects
or
liquids
into
the
product.
Do
not
use
the
product
where
flammable gases
may
be present.
This may cause electric shock, explosion
or
fire.
Do
not
touch
the
product
connected
to
a
power
outlet
during
lightning
storms.
This may cause electric shock.
• Periodically remove
any
dust
buildup
from
the
power
plug
and
power
outlet
using
a
dry
cloth.
• Do
not
plug
in
or
unplug
the
product
with
wet
hands.
• Do
not
use
the
product
if
the
power
plug
is
not
fully
inserted
into
the
power
outlet.
•
Do
not
expose
the
power
plug
and
terminals
to
dirt
or
let
them
come
into
contact
with
metallic
pins
or
other
metal objects.
•
Do
not
place heavy
objects
on
the
power
cord.
Do
not
damage,
break
or
modify
the
power
cord.
•
Do
not
wrap
the
product
in
cloth
or
other
materials
when
in
use
or
shortly
after
use when
the
product
is
still
warm
in
temperature.
•
Do
not
leave
the
product
connected
to
a
power
source
for
long
periods
of
time.
Do
not
charge
the
product
at temperatures
outside
the
range
of
5-
40 °C
(41
-104
°F).
This may cause electric shock, explosion
or
fire.
2
• Follow any indications to turn off the product in places where its use
is forbidden.
Not doing so may cause otherequipment to malfunction due to the effect
of
electromagnetic waves and even result in accidents.
A
CAUTION
Denotes the risk
of
injury.
Do not touch any parts inside the product.
This may cause injury.
Before
Use
• Images printed with this product are to be used for personal enjoyment.
Unauthorized printing
of
copyrighted material is prohibited.
The printer warranty is valid only in the country
or
area
of
purchase. In
case
of
printer problems while abroad, return to the area
of
purchase
before contacting a Customer Support Help Desk.
Package
Contents
.
□
SELPHY SQUARE QX10
□
Charging Cable
□
Sample Ink Casette
□
Sample Sticker Paper
• Printed matter is also included.
• Purchase a Color
Ink/
Label Set (XS-20L) separately.
• The accessory charging cable is a charging only cable, and cannot be
used for communication.
3
I
Names
of
Parts
(3)
--(4)
---(5)
-:.r~
u1
i:,;.;;...._~--(6)
ti
------------ (10)
(9)--
~~~-(7)
t.a
~r--<a>
(11)
(1) CHARGE lamp
(2) STATUS lamp
(3) Power button
(7) QR code label
(8) Ink cassette compartment
cover
(4) Charging terminal (9) Delivery outlet
(5) Forced shutdown switch
(6) Eject lever (10) Paper compartment cover
(
11
) Open button
CD
,
4
Place the printer on a table
or
otherflat, stable surface. Never place
the printer on an unstable
or
tilted surface.
Do not place objects in front
of
the delivery outlet that may interfere
with the paper during printing.
The QR code label
is
needed when you register the printer again,
such as when you change your model
of
smartphone. Take a photo
of
the QR code with the camera function
of
your smartphone, etc.
and store it carefully.
Ifthe ink sheet is loos,e, turn
the
sprocketgently
to
tighten it.
Do
not
touch
the
ink sheet.
~
Lamp
indications
STATUS
lamp
Off CHARGE lamp Status
~~~~~~~
Off Power off(Not charged)
Blinks slowly
green Charging in progress (Power off)
Charging complete (Power off)*1Lights green
Off
-----
Blinks slowly
white
Blinks white
Blinks quickly
white
Lights white
Off
Off
Off
Blinks green
Blinks slowly
green
Lights green
Blinks slowly red Blinks slowly
green
Blinks red Off
Blinks green
Blinks quickly red Off
Blinks quickly
green
Printer start-up in progress
Processing.
..
Remove the printed paper.
Standing
by
to print (Not charged)*2
Standing
by
to print (Battery level low)
Standing
by
to print (Charging in progress)
Standing by to print (Charging complete)
Outside the operating temperature range so
charging has paused.
An erroroccurred. Check the app message.
The battery level is low so printing is not
possible. Charge the battery.
An error occurred. Turn the power off and
then on again.
A battery erroroccurred.
*1
After
a while, the CHARGE lamp turns
off
.
-I
*2 You can checkthe battery level by pressing the Powerbutton in the Standing
by
to
print (Not charged) status.
• CHARGE lamp blinks two times:
The battery level is low, but the printer can still be used.
• CHARGE lamp blinks three times:
The battery level is sufficient.
5
Preparations
~
Charging
the
battery
1 Connectthe printer and the
charging USB AC adapter (sold
separately) with the accessory
charging cable.
The CHARGE lamp begins to blink
green and charging starts. When the
CHARGE lamp lights up green, charging
is complete.
~
Installing
the
app
The smartphone application SELPHY Photo Layout is needed to print with
this product.
• Download and install the latest version
of
SELPHY
Photo Layout.
Search for "SELPHY Photo Layout" from theApp Store (in case
of
an
iPhone, iPad)
or
Google Play (in case
of
an Android smartphone
),
and
install SELPHY Photo Layout.
2 Start SELPHY Photo Layout.
• Turn on location services on the smartphone.
,
6
Turn offpowersaving mode and other functions that reduce
smartphone battery consumption.
Follow the on-screen instructions.
For information on howto operate
the
printer, such as loading the paper
or
replacing the ink cassette, referto [Printer Manual]
of
SELPHY Photo Layout.
Printing
Precautions
Set the paper with the printing surface (the surface without the Canon
logo) facing downward, being careful not to touch the printing surface.
Do not use paper that has already been printed on orthat has written text
or other markings.
• The paperextends from the delivery outlet multiple times during printing.
Do not pull on the paper until the message indicating to remove the paper
is displayed on the smartphone.
• Do not interrupt communication until printing is finished.
If
communication
is interrupted, printing may be performed only partway.
Do not open the ink cassette compartment cover
or
the paper
compartment cover while the printer is operating.
•
If
the Standing by to print status continues for approximately 10 minutes,
the power will automatically turn off.
To
resume printing, press the Power
button.
•
7
I
Specifications
Dimensions
Weight
Operating temperature
Operating humidity
Rated input
Printing method
Resolution
Gradation
Papertray capacity
Paper size
Printing range
Printable number
of
sheets
Printing speed (per sheet)
Adapter and charging time
Approx. 102.2 x 143.3 x 31.0 mm
(4.02 X 5.65 X 1.23 in.)
(Excluding protrusions)
Approx. 445 g (15.70 oz.) (printerbody only)
5
°C-40
°C
(41
-104
°F)
20 -80%
DC 5.0 V ±0.5
V,
max. 900 mA
Dye-sublimation thermal transfer
(with overcoating)
287 x 287 dpi
256 shades per color
10 sheets
Approx. 72.0 x 85.0 mm (2.84 x 3.35 in.)
Selectable
by
the app from
approx. 68 x 68 mm (2.7 x 2.7 in.),
approx.
65
x 65 mm (2.6 x 2.6 in.),
or
approx. 62 x 62 mm (2.4 x 2.4 in.)
Approx. 20 sheets (room temperature, battery
fully charged)
Approx.
43
seconds (room temperature)
Use a chargerwith rated power output
of
DC 5.0
V,
1000
mA
or
more
to
charge the product. Charging takes approximately 2 hours at room
temperature, but this time may increase depending on the condition
of
the battery used and the charging environment.
All data is based on tests by Canon.
Printer specifications
or
appearance are subject to change without notice.
8
Wi-Fi
(Wireless
LAN)
Precautions
This product is embedded with a wireless device. The model number is
CD1158 (including WLAN module model WM321).
Countries and Regions Permitting WLAN Use
Use
of
WLAN is restricted in some countries and regions, and
illegal use may be punishable under national
or
local regulations.
To
avoid violating WLAN regulations, visit the Canon website to
check where use is allowed.
Note that Canon cannot be held liable for any problems arising
from WLAN use in other countries and regions.
• Doing any
of
the following may incur legal penalties:
Altering
or
modifying the product
Removing the certification labels from the product I
Do not use the wireless LAN function
of
this product near medical
equipment
or
other electronic equipment.
Use
of
the wireless LAN function near medical equipment
or
other
electronic equipment may affect operation
of
those devices.
9
,it"
Radio
Wave
Interference
Precautions
This product may receive interference from other devices that emit radio
waves.
To
avoid interference, be sure to use this product as far away as possible
from such devices,
or
avoid using the devices atthe same time as this
product.
Hereby, Canon Inc. declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text
of
the EU declaration
of
conformity is available at the following
Internet address:
http://www.canon-europe.com/ce-documentation
Wireless LAN Specifications
Frequency band(s): 2401 MHz -2473 MHz
Maximum radio-frequency power:
11
.4 dBm
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XBAmstelveen, The Netherlands
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku,Tokyo 146-8501, Japan
10
Complies with
IMDAStandards
D800671
,it'
Security
Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
Transmission monitoring
Third parties with malicious intent may monitorWi-Fi transmissions and
attempt to acquire the data you are sending.
Unauthorized network access
Third parties with malicious intent may use this product illegally
if
theyare
able
to
view the information contained in the
QR
code.
It is recommended
to
use the smartphone application SELPHY Photo
Layout to change the network password as necessary.
Precautions
before
Repair,
Disposal,
or
Transfer
of
Ownership
Before transferring ownership, disposing
of
the product,
or
sending itfor
repair,
do
the following to initialize the settings.
Turn on the power.
-+
Press and hold the Power button. After 1 second,
the STATUS lamp turns
off.-+
Continue pressing the Power
button.-+
When the STATUS lamp begins
to
blink, release the Power button.
Use
of
genuine
Canon
accessories
is
recommended
This product is designed to achieve excellent performance when used with
genuine
Canon
accessories.
Canon shall not be liable for any damage to this product and/oraccidents
such as fire, etc., caused by the malfunction
of
non-genuine Canon
accessories (e.g., a leakage and/or explosion
of
a battery pack). Please
note that this warranty does not apply to repairs arising out
of
the
malfunction
of
non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
11
I
CAUTION
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL
REGULATIONS.
-India only-
This product is not to be disposed
of
with your household waste,
according to the E-Waste (Management) Rules, 2016. This product
should be handed overto a designated collection point, e.g., to an
authorized colllection site for recycling waste electrical and electronic
equipment (EEE). Improper handling
of
this type
of
waste could have a
possible negative impact on the environment and human health dueto
potentially hazardous substances that are generally associated with EEE.
At
the same time, your cooperation
in
the correct disposal
of
this product
will contribute
to
the effective usage
of
natural resources. For more
information regarding return and recycling
of
WEEE products, please visit
http://www.canon.co.in/environment
or
write to us at customer.delight@
canon.co.in.
Also, this product complies with the "E-Waste (Management) Rules, 2016"
and prohibits use
of
lead, mercury, hexavalent chromium, polybrominated
biphenyls
or
polybrominated diphenyl ethers in concentrations exceeding
0.1
%
by
weight and 0.01 % by weight for Cadmium, except
for
the
exemptions set
in
Schedule
II
of
the Rule.
C)
12
Direct current
Stand-by
FCC Notice
(Printer, Model CD1158 Systems)
This device complies with part 15
of
the FCC Rules. Operation
is
subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to complywith the
limits for a Class B digital device, pursuant
to
part
15
of
the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and,
if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no
guarantee that interference will not occur in a particular installation.
If
this equipment does cause harmful interference to radio
or
television
reception, which can be determined by turning the equipment off and on,
the useris encouraged
to
try to correct the interference
by
one
or
more
of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer
or
an experienced radio/TV technician for help.
The cable with the ferrite core provided with the printermust be used with
this equipment in order to complywith Class B limits in Subpart B
of
Part
15
of
the FCC rules.
Do not make any changes
or
modifications
to
the equipment unless
otherwise specified in the manual.
If
such changes
or
modifications should
be made, you could
be
required to stop operation
of
the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, NewYork 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
13
I
FCC/IC Notice
Model: CD1158 (including WLAN Module Model WM321, FCC ID:
AZD321 / IC: 498J-321)
This equipment complies with FCC/IC radiation exposure limits set forth
for an uncontrolled environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102
of
the IC radio frequency (RF)
Exposure rules. This equipment should be installed and operated keeping
the radiator at least 20cm or more away from person's body.
This device complies with Part 15
of
FCC Rules and ISED's applicable
licence-exempt RSSs. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation
of
this device.
This transmitter must not be co-located
or
operated in conjunction with
anyother antenna
or
transmitter.
For CA, USA only
Included lithium battery contains Perchlorate Material -special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Canadian Radio Interference Regulations
CAN ICES-3 (B)/NMB-3 (B)
14
USAand Canada only:
The Lithium ion/polymer battery is recyclable.
Please call 1-800-8-BATTERYfor information on
howto recycle this battery.
Only
for
European Union and
EEA
(Norway, Iceland and Liechtenstein)
These symbols indicatethatthis product is notto be disposed
of
with your household waste, according to the WEEE Directive
(2012/19/EU),the Battery Directive (2006/66/EC)and/ornational
legislation implementing those Directives.
-
If
a chemical symbol
is
printed beneath
the
symbol shown
above, in accordance with the Battery Directive, this indicates
that a
heavy
metal
(Hg=
Mercury,
Cd=
Cadmium,
Pb=
Lead) is present in this battery
or
accumulator
at
a concentration abovean applicable
threshold specified in
the
Battery Directive.
This
product should
be
handed
over
to a designated collection point, e.g., on an
authorized one-for-one basis
when
you
buy
a
new
similar product
or
to
an authorized
collection site
for
recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling
of
this type
of
waste
could have a
possible impact on the environment and human health
due
to potentially hazardous
substances
that
are
generally associated with EEE. Your cooperation in
the
correct
disposal
of
this productwill contribute
to
the effective usage
of
natural resources.
For
more information aboutthe recycling
of
this product, please contact yourlocal city
office, waste authority, approved scheme
or
your household waste disposal service
or
visitwww.canon-europe.com/weee,
or
www
.canon-europe.com/battery.
Trademarks
App Store, iPhone and iPad are trademarks
of
Apple Inc., registered in
the U.S. and other countries.
Google Play and Android
are
trademarks
of
Google LLC.
QR
Code is a trademark
of
Denso Wave Inc.
Wi-Fi®, Wi-FiAlliance
®,
WPA
TM
and WPA2™ are trademarks
or
registered
trademarks
of
the Wi-FiAlliance.
All other trademarks are
the
property
of
their respective owners.
15
I
Disclaimer
Reprinting, transmitting,
or
storing in a retrieval system any part
of
this
guide without the permission
of
Canon is prohibited.
Canon reserves
the
right to change the contents
of
this guide at anytime
without prior notice.
• Illustrations in this guide may differslightly from the actual equipment.
The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation
of
the products.
• For information aboutthird-party software, read "Third party software" at
the end
of
this guide.
16
Third party software
This product includes third party software.
eXySSL
Portions based on XySSL Copyright (C) 2006-2008 Christophe Devine
Copyright (C) 2009 Paul Bakker<polarssl_maintainer
at
polarssl dotorg>
All rights reserved.
• MBEDTLS
Portions based on MBEDTLS
Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
SPDX-License-ldentifier: Apache-2.0
Distributed on an "AS IS" BASIS, WITHOUT
WARRANTIES
OR
CONDITIONS OF ANY KIND, either express
or
implied.
You
may obtain a copy
of
theApache License at
http://www.apache.org/licenses/LICENSE-2.0
Apache License
Version 2.0, January2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions
for
use, reproduction, and distribution
as
defined by Sections 1 through 9
of
this document.
"Licensor" shall mean the copyright owner
or
entity authorized by the copyright
ownerthat is granting the License.
"Legal Entity" shall mean the union
of
the acting entity and all otherentities that
control, are controlled
by,
or
are under common control with that entity. Forthe
purposes
of
this definition, "control" means (i) the power, direct
or
indirect, to cause
the direction
or
management
of
such entity, whether
by
contract
or
otherwise,
or
(ii)
ownership
of
fifty percent (50%) or more
of
the outstanding shares,
or
(iii) beneficial
ownership
of
such entity.
"You" (
or
"Your") shall mean an individual
or
Legal Entity exercising permissions
granted by this License.
"Source" form shall mean the preferred form for making modifications, including but
not limited to software source code, documentation source, and configuration files.
"Object" form shall mean anyform resulting from mechanical transformation
or
translation
of
a Source form, including but not limited to compiled objectcode,
generated documentation, and conversions toother media types.
"Work" shall mean the work
of
authorship, whether in Source
or
Object form, made
available under the License,
as
indicated by a copyright notice that is included in or
attached to the work (an example is provided in theAppendix below). 1
"Derivative Works" shall mean anywork, whether in Source
or
Object form, that
is based
on
(or derived from) the Work and for which the editorial revisions,
annotations, elaborations,
or
other modifications represent, as a whole, an original
work
of
authorship. For the purposes
of
this License, Derivative Works shall not
include works that remain separable from,
or
merely link (or bind by name)
to
the
interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean anywork
of
authorship, including the original version
of
the Work and any modifications
or
additions to that Work or Derivative Works
thereof, that is intentionally submitted
to
Licensor for inclusion
in
the Work by
the
copyright owner
or
by an individual
or
Legal Entity authorized
to
submit on behalf
of
the copyright owner.
For
the purposes
of
this definition, "submitted" means any
form
of
electronic, verbal,
or
written communication sent
to
the Licensor or its
representatives, including but not limited
to
communication
on
electronic mailing
lists, source code control systems, and issue tracking systems that are managed
by,
or
on
behalfof, the Licensor for the purpose
of
discussing and improving the Work,
butexcluding communication that is conspicuously marked
or
otherwise designated
in writing bythe copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual
or
Legal Entity
on
behalf
of
whom a Contribution has been received
by
Licensor and subsequently incorporated
within the Work.
2. Grant
of
Copyright License. Subject
to
the terms and conditions
of
this License, each
Contributor herebygrants
to
You a perpetual, worldwide, non-exclusive, no-charge,
royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works
of, publicly display, publicly perform, sublicense, and distribute the Work and such
Derivative Works in Source
or
Object form.
3. Grant
of
Patent License. Subject
to
the terms and conditions
of
this License, each
Contributor herebygrants
to
You a perpetual, worldwide, non-exclusive, no-charge,
royalty-free, irrevocable (except
as
stated in this section) patent license to make,
have made, use, offer to sell, sell, import, and otherwise transferthe Work, where
such license applies only
to
those patentclaims licensable by such Contributor that
are necessarily infringed by their Contribution(s) alone
or
by combination
of
their
Contribution(s) with the Work
to
which such Contribution(s) was submitted.
If
You
institute patent litigation against any entity (including a cross-claim
or
counterclaim
in a lawsuit) alleging that the Work
or
a Contribution incorporated within the Work
constitutes direct
or
contributory patent infringement, then any patent licenses
granted
to
You underthis License forthat Work shall terminate as
of
the date such
litigation isfiled.
4l
. Redistribution. You may reproduce and distribute copies
of
the Work
or
Derivative
Works thereofin any medium, with
or
without modifications, and in Source
or
Object
form, provided thatYou meetthe following conditions:
2
(a) You must give anyotherrecipients
of
the Work
or
Derivative Works a copy
of
this
License; and
(b)
You
mustcause any modified files to carry prominent notices stating that
You
changed the files; and
(c)
You
must retain, in the Source form
of
any Derivative Works that
You
distribute,
all copyright, patent, trademark, and attribution notices from the Source form
of
the Work, excluding those notices that
do
not pertain to any part
of
the Derivative
Works; and
(d) Ifthe Work includes a "NOTICE" text file
as
part
of
its distribution, then any
Derivative Works that You distribute must include a readable copy
of
the
attribution notices contained within such NOTICE file, excluding those notices
that
do
not pertain to
any
part
of
the Derivative Works, in
at
leastone
of
the
following places: within a NOTICE text file distributed
as
part
of
the Derivative
Works; within
the
Source form
or
documentation,
if
provided along with the
Derivative Works;
or
, within a display generated by the Derivative Works,
if
and
wherever such third-party notices normally appear. The contents
of
the NOTICE
file are
for
informational purposes only and
do
not modifythe License. You may
add Your own attribution notices within Derivative Works that
You
distribute,
alongside
or
as
an addendum to the NOTICE text from the Work, provided
thatsuch additional attribution notices cannot be construed
as
modifying the
License.
You may add Yourown copyright statement to Your modifications and may provide
additional
or
different license terms and conditions for use, reproduction,
or
distribution
of
Your modifications,
or
for any such Derivative Works as a whole,
provided Your use, reproduction, and distribution
of
the Work otherwise complies
with the conditions stated in this License.
5. Submission
of
Contributions. Unless
You
explicitly state otlherwise, any Contribution
intentionally submitted for inclusion
in
the Work by You to
the
Licensor shall be under
the terms and conditions
of
this License, without any addit1ional terms
or
conditions.
Notwithstanding the above, nothing herein shall supersede
or
modify the terms
of
any separate license agreement you may have executed with Licensor regarding
such Contributions.
6. Trademarks. This License does notgrant permission to use the trade names,
trademarks, service·marks,
or
product names
of
the Licensor, exceptas required
for
reasonable and cus.tomary use in describing the origin
of
the Work and reproducing
the content
of
the NOTICE file.
7. Disclaimer
of
Warranty. Unless required
by
applicable law
or
agreed to in writing,
Licensor provides the Work (and each Contributor provides its Contributions)
on an "AS IS" BASIS, WITHOUT WARRANTIES
OR
CONDITIONS OF
ANY
KIND, either express or implied, including, without limitation, any warranties
or
conditions
of
TITLE, NON-INFRINGEMENT, MERCHANTABILITY,
or
FITNESS
FORA PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness
of
using
or
redistributing the Work and assume any risks associated
with Your exercise
of
permissions under this License.
3
Other manuals for SELPHY SQUARE QX10
2
Table of contents
Other Canon Printer manuals
Canon
Canon MultiPASS C2500 User manual
Canon
Canon PIXMA MG5150 User manual
Canon
Canon imageclass MF229DW User manual
Canon
Canon Laser Shot LBP-2900 User manual
Canon
Canon C1333iF User manual
Canon
Canon LBP-2460 Instruction Manual
Canon
Canon TR8500 Series User manual
Canon
Canon PIXMA MG3520 Installation and maintenance instructions
Canon
Canon MG3600 series User manual
Canon
Canon Selphy CP730 Configuration guide
Canon
Canon Laser Shot LBP-5200 User manual
Canon
Canon iPF5100 - imagePROGRAF Color Inkjet Printer User manual
Canon
Canon I450 - i 450 Color Inkjet Printer User manual
Canon
Canon L280 Safety guide
Canon
Canon PIXMA G7040 Setup guide
Canon
Canon Pixma MG3500 Series Setup guide
Canon
Canon TS6400 Series Setup guide
Canon
Canon imageCLASS LBP162dw User manual
Canon
Canon imagePASS-N1 User manual
Canon
Canon Selphy CP710 User manual
