Canon TS3100 Series User manual
Hưng dn bt đu
Trưc tiên đc Thông tin an ton v quan trng
(ph lc).
Mari Memulai
Baca Keamanan dan Informasi Penting
(lampiran) terlebih dahulu.
Getting Started
Read Safety and Important Information
(addendum) rst.
1
2
Lp đt My in .................................................................. trang 1
Kt ni vi my tnh v smartphone/my tnh bng ......... trang 4
Cch gi My in Đon phim gii thch
Memasang Pencetak ...................................................halaman 1
Menghubungkan dengan Komputer dan Ponsel Pintar/Tablet ...halaman
4
Cara Memegang Pencetak
Video Penjelasan
Installing the Printer ...........................................................page 1
Connecting with Computer and Smartphone/Tablet ..........page 4
How to Hold Printer Explanatory Movies
1
1. Checking Included Items
□ Power cord □ FINE cartridge
□ Safety and Important Information
□ Getting Started (this manual)□ Setup CD-ROM for
Windows PC
2. Removing Packing
Materials / Turning on
Printer
1 Remove the packing materials (such as orange
tape) from outside the printer.
2 Open the cover.
3 Remove the orange tape and the protective
material and discard them both.
4 Close the cover.
5 Connect the power cord.
Do not connect any cables except the power cord
yet.
6 Press the ON button.
If E > 0 > 9 appears on the screen, press the ON
button to turn off the printer, and then redo from
step 2.
ENGLISH
2
3. Installing FINE Cartridge
1 Open the cover.
2 aTake out the Color FINE cartridge from the
package.
bRemove the protective tape.
a
Do not touch.
b
Be careful of ink on the protective tape.
3 Tilt the Color FINE cartridge a little and insert it
into the FINE cartridge holder on the left.
Do not bump it against
the surrounding parts.
4 Push the FINE Cartridge in and up rmly until it
snaps into place.
3
5 Repeat steps 2 to 4 and install the Black FINE
cartridge as well, on the right.
6 Close the cover.
If E > 0 > 4 appears on the screen, return to step
3 and conrm that the Color and Black FINE
cartridges are correctly installed.
4. Loading Paper
1 Open the paper support.
2 Slide the paper guide to the left.
3 aLoad plain LTR or A4 size paper against the
right edge with the print side facing up.
bSlide the paper guide to align it with the side of
the paper stack.
a
b
4 Pull out the paper output tray.
5 Open the output tray extension.
ENGLISH
4
5. Select Whether or Not to
Connect to Computer or
Smartphone
In the following description, smartphones and tablet
devices are collectively described as smartphone.
1 Conrm that the screen appears as shown
below.
Flashing
2 Proceed to a step according to how you use
the printer.
To use the printer
by connecting
to a computer or
smartphone
For smartphones only page 6
To use the printer
without connecting
to a computer or
smartphone 6-A
6-A. Use Only Printer
1 Press the Stop button on the printer.
2 Conrm that the screen appears as shown below.
The setup is now complete.
6-B. Connecting to
Computer
Windows Mac OS
You need a connection setup for each computer. Proceed
with the setup from step 1 for each computer.
1 Start the setup le for either method or method
.
Downloading from the Internet
aOpen a web browser ( etc.) on your computer.
bInput the following URL and access the Canon
website.
cSelect Set Up.
dInput the model name of your printer and click OK.
You can select a model name from the list.
eClick Setup.
The procedures for Windows and Mac OS are shown
below. If you are using a computer with an OS other
than Windows or Mac OS, such as a Chrome OS, do
the setup according to the on-screen instructions.
fClick Download and download the setup le.
gExecute the downloaded le.
Proceed to step on the next page to
continue.
5
Using Setup CD-ROM (Windows Only)
aLoad the Setup CD-ROM in your computer.
■ When using Windows 10 or Windows 8.1:
bWhen the following message appears on the right
side of your computer screen, click it.
cIf the following screen appears, click Run
Msetup4.exe.
dIf the User Account Control dialog box appears,
click Yes.
When This Message Does Not Appear (or Has
Disappeared)
1. Click File Explorer on the taskbar.
or
2. Click This PC on the left side of the opened window.
3. Double-click the CD-ROM icon on the right side of
the window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
4. Proceed to step d.
■ When using Windows 7:
b When the AutoPlay screen appears, click Run
Msetup4.exe.
c If the User Account Control dialog box appears,
click Continue.
When AutoPlay Screen Does Not Appear
1. Click Computer from the start menu.
2. Double-click the CD-ROM icon on the right side of
the opened window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
Proceed to step to continue.
2 Click Start Setup.
The connection with your computer is now complete. You can print from your
computer.
If the following screen appears, click Exit.
Follow the on-screen
instructions to proceed
with the setup.
ENGLISH
6
6-C. Connecting to Smartphone
iOS Android
You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone.
Preparation
• Turn on Wi-Fi on your smartphone.
• If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer.
* For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers.
1 Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
: Search "Canon PRINT" in App Store.
: Search "Canon PRINT" in Google Play.
Or access the Canon website by scanning the QR code.
* You may not connect your smartphone to the Internet wirelessly during connecting the printer to the smartphone directly.
In that case, you may be charged depending on the contract with your service provider.
* Up to 5 devices can be connected to the printer via wireless LAN connection directly.
2 Check the display on the printer.
The screen turns off when no operation is made for about 10 minutes. Press one of the buttons on the operation
panel (except for the ON button) to display the screen.
■ If the following screen appears:
Check the icon on the upper left, and then proceed
to or .
If appears, the printer cannot communicate by
wireless LAN connection. For details, access "http://ij.start.
canon" to see Frequently Asked Questions.
■ If the following screen appears:
Proceed to .
No (Proceed to .)
YES
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
cMake sure that the following screen appears.
The connection with your smartphone is
now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading
Photo Paper" on page 8.
The following icon appears.
(The printer is connected to a network.)
Flashing
7
Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
aTap Settings on your smartphone's home screen,
and tap Canon_ij_XXXX in the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list,
see "Preparation for Printer" below to operate the
printer, and then repeat step a.
bTap the installed application software.
cFollow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on
your environment.
dMake sure that the following screen appears.
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Preparation for Printer" below to operate the
printer, and then wait for a while until the message
appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
cMake sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.
aPress and hold the Direct button on the printer. bWhen the following icon starts to ash on the
screen, release the button.
cReturn to the operation of your smartphone.
Preparation for Printer
ENGLISH
8
1 Open the paper support.
2 Slide the paper guide to the left.
3 aLoad photo paper against the right edge with
the print side facing up.
bSlide the paper guide to align it with the side
of the paper stack.
a
b
4 Press the Paper button, select a paper size, and
then press the OK button.
5 Pull out the paper output tray.
6 Open the output tray extension.
Loading Photo Paper
Print Results Are Unsatisfactory
If the print results are not what you expected, such as if straight lines are crooked or colors are inconsistent, do a
Print Head Alignment.
For details, click the Maintenance on the Online Manual and refer to If Printing Is Faint or Uneven > Aligning
the Print Head.
Refer to the back cover for how to open the Online Manual.
■ Lines Are Misaligned ■ Uneven or Streaked Colors
1
1.
□ □
□
□ □
Windows
2.
1
2
3
4
5
6
E09
2
2
3.
1
2 a
b
a
b
3
4
3
5 2
6
E04
3
4.
1
2
3 a
b
a
b
4
5
4
5.
1
2
6
6-A
6-A.
1 Stop
2
6-B.
Windows Mac OS
1
a
b
c
d
e
Windows
Windows
f
g
5
Setup CD-ROM (Windows
a
■
:
b
c
Msetup4.exe(Run Msetup4.exe
d
1.
2.
3.
Msetup4.exe
4.d
■
:
b
Msetup4.exe(Run Msetup4.exe
c
1.
2.
Msetup4.exe
2
6
6-C.
iOS Android
•
•
*
1
*
* 5
2
■
■
a
b
c
7
a
a
b
c
d
a
b
c
a b
c
8
1
2
3 a
b
a
b
4
OK
5
6
■
■
1
BAHASA INDONESIA
1. Memeriksa Item yang Tersedia
□ Kabel listrik □ Kartrij FINE
□ Keamanan dan Informasi Penting
□ Mari Memulai (petunjuk ini)□ Setup CD-ROM
untuk PC Windows
2. Melepaskan Material
Kemasan / Menyalakan
Pencetak
1 Lepaskan material kemasan (misalnya pita
oranye) dari bagian luar pencetak.
2 Buka penutup.
3 Lepaskan pita oranye dan material pelindung
kemudian buang.
4 Tutup penutup.
5 Hubungkan kabel listrik.
Jangan hubungkan kabel apa pun selain kabel
listrik terlebih dahulu.
6 Tekan tombol D AYA .
Jika E > 0 > 9 muncul pada layar, tekan tombol
D AYA untuk mematikan pencetak, kemudian ulangi
dari langkah 2.
2
3. Memasang Kartrij FINE
1 Buka penutup.
2 aKeluarkan Kartrij FINE Warna dari dalam
kemasan.
bLepaskan pita pelindung.
a
Jangan sentuh.
b
Hati-hati dengan tinta pada pita pelindung.
3 Miringkan sedikit Kartrij FINE Warna dan
masukkan ke dalam penahan kartrij FINE di
sebelah kiri.
Jangan benturkan dengan
bagian sekelilingnya.
4 Dorong Kartrij FINE masuk dan naik sampai pas
pada tempatnya.
Other manuals for TS3100 Series
3
This manual suits for next models
1
Table of contents
Languages:
Other Canon Printer manuals
Canon
Canon Pixma iP110 series Setup guide
Canon
Canon PIXMA TS6120 Setup guide
Canon
Canon PIXMA MP800 User manual
Canon
Canon iPF650 - imagePROGRAF Color Inkjet Printer User guide
Canon
Canon PIXMA MX340 Series Manual
Canon
Canon BJC6500 - BJC 6500 Color Inkjet Printer User manual
Canon
Canon PIXMA G7000 Series User manual
Canon
Canon iPF500 - imagePROGRAF Color Inkjet Printer User manual
Canon
Canon imagePROGRAF IPF9000S User manual
Canon
Canon PIXMA iX7000 User manual
Canon
Canon NP6320 User manual
Canon
Canon selphy cp1200 User manual
Canon
Canon PIXMA MP510 User manual
Canon
Canon FAX L160 User manual
Canon
Canon mg6400 series User manual
Canon
Canon Printer User manual
Canon
Canon MG6800 Series User manual
Canon
Canon iP1500 - PIXMA Color Inkjet Printer User manual
Canon
Canon imageclass MF216N User manual
Canon
Canon E470 Series Setup guide
